Parts & Accessories
The Wahoo BlueSC speed and cadence sensor transforms your phone into a powerful cycling computer. Using Bluetooth Smart and ANT+ technology, it tracks cycling speed, cadence, and distance which can be paired with your favorite cycling app including Strava and Zwift, or paired to your bike computer. It's weatherproof, small with a low drag profile, and comes with a rubber band and zip tie mounts. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and GPS devices. - No tangled wires on your bike to connect the sensor to your device. - Provides accurate speed data during your ride - Provides accurate cadence data during your ride - BlueSC comes with a rubber band mount and zip tie mount. - The Blue SC sensor will fit with most bikes and frame sizes
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz
Our patented ANGi sensor calls for help when you can’t. In fact, it’s the first device to protect you before, during, and after a crash. It does this through a pairing with our Specialized Ride App for iOS or Android devices. And if it detects a crash, it commences a countdown that, if you’re ok, you can stop and keep riding. If, however, ANGi determines that you’re in need of help, it’ll send an alert to your selected contacts with your last known GPS coordinates and a message that you’re in need of help. What about if you’re out of service coverage? ANGi has a plan for that. Just set your estimated ride time before you head out when you know that your ride will take you out of range. All you need is an active data signal when you start your session. And if you haven’t completed your ride within that time frame, ANGi will send a notification to your contacts with your last uploaded location. - ANGi is a ride tracker, crash detector, and safety beacon. - Includes a one-year subscription to Specialized Ride Premium app. - Detects and reports potentially dangerous helmet impacts to the Specialized Ride app, which notifies your emergency contacts and sends them your most recent GPS coordinates. - Additional premium features include start ride notifications and ride-time alerts. - Attaches to Specialized ANGi-ready helmets. - Approximate six months' battery life on a 2032 coin cell battery. - Weight: 10 grams w/ battery - Two-year sensor warranty
Charge your Specialized Turbo battery with this high output, custom Li-ion charger. • Custom Specialized Li-ion battery charger • Output: 42V4A • Compact design while delivering huge power • With Rosenberger plug and light indication of the charging status
Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want. - Limitless remote shifting positions for drop and aero bars - Wired shift buttons can be positioned however the rider prefers - Connect to Blip Box or drop bar eTap levers - Compatible with SRAM RED eTap shift/brake controls
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap
Professional, aero-shaped 31.8mm handlebar mount designed for Garmin Edge 200, 500, 510 models. - Created with design feedback from pro Team Sky - Mounts computer close to stem - Slim clamp area reduces handlebar footprint - Precision machined, anodized 6061 T6 aluminum - Weight: 29g
Convert your K-Edge Garmin Computer Mount to be a Computer + Action Camera combination mount. Works with any camera that utilizes the GoPro sytle interface, including GoPro Hero, Garmin VIRB, and Shimano CM-1000. - Camera Adapter mount with GoPro style interface - Fits K-EDGE Garmin Mounts (K13-500, K13-505, K13-560) - Locks GoPro, Shimano, VIRB style cameras underneath Garmin Computer. - Centers camera in out of site position - Improves video clarity by removing plastic mount shake - Colors: Anodized Black - Weight: 14grams *Note: Garmin VIRB requires the GoPro adapter that is included in the box with the VIRB.
NEW K-EDGE Go Pro Style Top Cap is an ideal position for your camera or light. This mount replaces your top cap with a functional camera/light mount. Not all of these Top Cap mounts are created equal. The precision fit of the K-EDGE Mount is critical to both proper headset compression AND camera security. Whether dropping into a World Cup Downhill descent or simply following your kids on a family ride, enjoy the convenience of this GoPro style mount. - Clean, sleek, (replaces top cap) - Ideal position, centered, above cockpit - Ultimate Enduro, DH, filming platform - Adaptable camera or light mount - CNC Machined, one piece, lifetime warranty - All hardware included
The strongest K-EDGE Mount yet, designed for today’s heaviest computers, cameras and lights. Upgrade to the Garmin Max Combo mount for a solid and clean platform for your cycling electronics. Chosen by the best, year after year, when quality, performance and craftsmanship matter. - Max XL combo mount is compatible with all Garmin Cycling Computers - Combo Mount (Computer on top – light or camera underneath) with GoPro style light/camera interface - GARMIN approved replaceable computer insert protects computer tabs - CNC Machined Aluminum, Anodized Black with laser etched logos - Made in-house, Boise, Idaho USA with a Lifetime Warranty - Weight: 63g
K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatible: Garmin EDGE 820, 520, 510, 500, 25 and 20. - Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system - Fits 31.8MM Handlebars - NOT combo compatible - Weight: 48g - Anodized Color- Black
The K-EDGE co-polymer insert for Garmin 1/4 Turn style computers is a replaceable item. While it is extremely strong, we designed this insert to fail on a significant impact before the tabs on the back of the Garmin break. - Qty 1 – K-EDGE Co-polymer Insert for Garmin 1/4 Computer (Part No. K13-503) - Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws
Replacement plastic insert kit for K-EDGE Wahoo Mounts. The co-polymer insert for Wahoo 1/4-turn style computers is a replaceable item. While it is extremely strong, it is designed to fail on a significant impact before the tabs on the back of the Wahoo break. Attributes (specs): – Qty 1 – K-EDGE Co-polymer Insert for Wahoo 1/4 Computer (Part No. K13-1604) – Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws
Monitor your speed and cadence as you ride with these easy-to-install wireless sensors. With no magnets or other exposed parts to line up, these sensors are easy to install, maintain and move between bikes. The speed sensor 2 attaches to the hub of either wheel and self-calibrates with your Edge cycling computer or compatible Garmin device to give you accurate speed and distance at all times — even without a head unit. The cadence sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training. Send live speed, distance and cadence data to compatible training apps or displays by using ANT+ connectivity and BLUETOOTH Low Energy technology. With both of these sensors on your bike, you can work to improve your personal best or see where you stand against the pros.
Protect your Edge 1030 with this form-fitting, removable silicone case.
CatEye's ANT+ Speed/Cadence Sensor works with any ANT+ compatible cyclo-computer, including CatEye's Stealth EVO+, to give you speed and cadence data, so you can improve your cycling and track your rides. Attack each ride and celebrate your successes on the bike!
Low Road position places the computer in front of the bar and nearly flush with the top of the bar, making for an easy to read display whether you are on the hoods or in the drops. - Sub-20 gram computer mount - Compatible with computers with 1/4 turn twist lock interface and 31.8mm bar surface - Single Torx T25 fixing bolt
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.
Handlebar computer mount for Garmin/Wahoo for Vuka Shift AXS
• When aerobar space is tight, place your computer on top • Tuck straw on either side for best aerodynamics • Fits on TORPEDO SYSTEM 100, TORPEDO SYSTEM 400 & REFILL UPGRADE KIT BOTTLES (each sold separately) • Compatible with most computers, including large screens (sold separately) • Glass-reinforced nylon • Weight: 18.5 grams
Telescoping Garmin Computer Mount for Versa Plates. Raise the computer up for Refill Bottles, or lower it down to clear Standard Bottles. On-the-go tilt adjust to avoid glare. - Telescoping computer mount makes for a seamless switch between Refill or Standard Bottle - Compatible with Garmin bike computers and Multisport Watches - Requires Versa Carbon Mount or Versa Aluminum Mount Telescoping Garmin-Specific Computer Mount - Raise the computer mount up to tuck in a Refill Bottle for race day, or seamlessly lower it down for a Standard Bottle to maintain the optimal view for training days. Compatible with Garmin bike computers and multisport watches. On-the-Go Computer Tilt Adjust - Avoid changing glare with a tilt mechanism for easy adjustments while you ride Arrives Fully Assembled - Few steps required to install and head out on your first ride - Weight: 1.9oz (54g) - Construction: Nylon Composite Includes - Fully assembled computer mount - 2 screw sets: one for Versa Carbon Plates, and one for Versa Aluminum Plates Warranty: Limited Lifetime
An innovative cycle computer/action camera center mount, specifically designed for integrated stem/handlebar systems. Various mounting positions for Garmin Edge/Wahoo/Sigma GPS cycle computers and GoPro/Shimano sport cameras, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800 BT, and other GoPro-mount-compatible devices. - Compatible Devices: Garmin Edge / Wahoo / Sigma GPS bike computer / GoPro action cams and other devices with GoPro mount - Handlebar Compatibility: Shimano Pro Stealth, FSA Plasma, Ritchey WCS Solostream, SCOTT SYNCROS RR1.0 Carbon Aero 420, Most Talon, Canyon H31 & CP series - Material: aluminum / fiberglass composite - Max load: 220g - Weight: 40g (120mm) / 45g (150mm) - Dimensions: 12 x 3.5 x 3cm (120mm) / 15 x 3.5 x 3cm (150mm)
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm
Securely holds your Turbo Connect Display/Speedzone 2 computer. - Specialized Turbo Connect Display mount. - Left- and right-side compatible. - Mountain bike design situates a CPU above stem. - Fits 35mm handlebars.
$1.95 $10.00 81% Off
Kit containing all replaceable items for the Specialized power meter pod. - White silicone O-ring. - Two M3x5 stainless steel screws.
Crank Arm Cadence Magnet for Specailized SpeedZone Computers.
A stem mount for SpeedZone Elite, Comp, and Pro computers.
A secondary or replacement mount for Specialized SpeedZone Expert and Comp computers. Includes a stem mount, bar mount, magnet and wireless ANT+ speed/cadence sensor.
High-efficiency charger cable for Flux headlights. - High capacity wire can transfer more power with less loss. - Custom "L" shaped Mini USB Male for the best fit to Flux headlights. - NOTE: This is a CHARGE ONLY cable and cannot be used for data transfer.
Enjoy easy viewing with the Butler Out Front handlebar mount! Out Front Mount for following models: BC 1909 STS BC 2209 STS ROX 5.0 ROX 6.0 ROX 8 ROX 8.1 ROX 9 ROX 9.1 *Note: not for use with ROX 10.0
The new DN300 Built-In type battery features the same waterproof design that Di2 users have loved for generations. Now with 3 ports, it delivers stable power to Shimano's 12-speed road derailleurs (and shifters if a fully wired option is selected). - Compatible with thinner next-generation electric wire SD300 and systems after R9250/R8150 series - Li-Ion type - Capacity: 500 mAH |3.7Wh (± 2000km autonomy) - Rated voltage: 7.4V - Charges through RD-R9250 |RD-R8150 rear derailleur using EW-EC300 Di2 Charging Cable (sold separately) - Fixing small parts included - Weight: 52g
Shimano Di2 External Battery Mount - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware
The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705. - Glass-filled nylon, stainless steel Torx T25 bolt - Weight: 20g
Free up bar space and secure your GoPro and many other stem-mounted accessories with our Ritchey Universal Stem Mount. Our unique mount means clutter- and hassle-free mounting of your favorite devices where they're easily viewed and operated. - Compatible with Ritchey C220 and 4-Axis 44 stem faceplates - Forged and machined alloy - Includes extended-length hardware
Mount your bike computer directly to your ShockStop Suspension Stem. The ShockStop Computer Mount puts your Garmin, Wahoo, Cateye, Joule, Mio, Magellan, or Polar bike computer in perfect position. Two different mounting positions let you fine-tune the fit of your computer and tuck it out of the wind. Benefits: - Conveniently places your computer directly in front of your stem within easy reach - Two different mounting options let you fine-tune the position of your computer Details: - Fits ShockStop Suspension Stem only (Note: using the computer mount with the +30 degree stem will place the computer in a very upright position in line with the stem) - 2 different mounting positions (upper & lower) Compatibility: - Compatible with Garmin Forerunner QR kits - Compatible with Garmin Edge 1000 in portrait and landscape mode (upper position) and landscape mode only for lower position - Compatible with Wahoo Element and Polar in the upper position only
This mount integrates with your Quick-Release Aerobars by attaching directly to one of the aerobar handlebar clamps and provides and out-front section of bar for attaching computers or other accessories. Benefits: - Positions your computer for easy viewing in road or aero riding positions - Stays attached to your bicycle when aerobars are removed Details: - Provides two mounting heights and 3 positions to fine tune your computer's position - Integrates with the optional Water Bottle Mount, putting all your essentials at your fingertips - Includes all necessary mounting hardware
ShockWiz is a suspension tuning system for air-sprung mountain bikes that combines high-tech hardware with an intuitive smartphone app. It's lightweight, durable and powered by a long-lasting coin cell battery, ShockWiz automatically records and evaluates suspension performance every time you ride. The ShockWiz app displays straightforward adjustments that unite bike, terrain and riding style. ShockWiz works for all mountain bike riders, regardless of their experience or bike's intended use. It works on hardtail and dual suspension bikes, and for all levels of skill, speed, and terrain. With ShockWiz, you know exactly how your suspension is performing – and how to make it better. Features & Benefits: - Automated tuning recommendations - Shock tuning score - a snapshot of how well your suspension is set up for you - Works on hardtail and dual suspension bikes. Works for Cross-Country, Trail, All Mountain and Downhill. - Inexpensive, replaceable CR2032 battery lasts for months - Waterproof and dustproof - IP67 rating - Two alternative hoses (included) offer a range of fitting options - Smartphone app is compatible with Apple and Android phones Essential Details: - ShockWiz is designed for all mountain bike riders, regardless of your experience or bike's intended use. - You can tune for every riding style: Efficient (pedaling), Balanced, Playful or Aggressive. - Advice for air pressure, spring rate, compression and rebound is displayed in the intuitive smartphone app. - In the box: ShockWiz hardware, two hoses, rubber mounting boot and zip ties.
Spare parts for Quarq's ShockWiz automated suspension tuning device. - Contains a rubber mounting boot, four zip ties, plastic cap and two o-rings.
Spare hose kit for Quarq's ShockWiz automated suspension tuning device. - Contains one of each hose type and four zip ties.
The Under Stem Mount allows riders to secure a Shimano Di2 Junction Box to their bike quickly and easily without the need for zip ties, duct tape, or other unreliable attachments. - Lightweight alloy headset spacer with nylon body (9g) - Compatible only with Shimano Di2 Junction Box - 95mm length, 44mm width, 6mm height - 6 Degree angle
Wire harness and hardware to measure computer data based on the front wheel. - Fits most bars bars (25.0 to 31.8mm), 86cm wire, wheel magnet (fits up to 4mm bladed spokes) and zip ties - Compatible with: Protege 5.0, 8.0 and 9.0
Wire harness and hardware to measure computer data based on the rear wheel - Contains bracket with 130cm wire, wheel magnet (fits up to 4mm bladed spokes) and zip ties - Bracket fits most bars (25.4 to 31.8mm) - Compatible with: Protegé 5.0, 8.0 and 9.0 - Ideal for rear wheel indoor bicycle trainers
Protege wire harness and hardware with extra length for use with tandem and recumbent bicycles - Contains bracket with 160cm wire, wheel magnet and zip ties - Brackets fits Standard (25.4-26.0mm) bars - Compatible with: Protegé 5.0, 8.0 and 9.0 - Ideal for long wheelbase recumbent and computer installs on a tandem’s rear bars
- Contains universal handlebar/stem compatible bracket, sensor and magnet - Compatible with Protege 9.0 wireless computer - Will not convert standard Protege 9.0 to wireless
The portable, rugged Buckshot 2.0 Bluetooth speaker wirelessly streams audio anywhere from a smartphone or Bluetooth-enabled device with high-performance acoustics. Includes four mounting options for a secure fit. - Integrated microphone/speakerphone is Siri-compatible with built-in call functionality to receive hands-free calls; three-button system to change tracks, adjust volume, pause, and play - IPX6 dust resistant, water-resistant, and shock-resistant - Includes four mounting options: drop-in with shoe bracket, wear speaker with a secure fit clip or adjust clip facing down to sit on flat surfaces, screw mount with 1/4", 20 thread, or strap on with included silicone handlebar mount - Rechargeable Lithium-Ion battery provides up to 16 hours play time with wireless range up to 33 feet - Lightweight and compact - Weight: 108g
The Muc-Off Secure Tag Holder offers a secure way to install a tracker to your bicycle frame using the bottle cage mounting holes, so you can track down your bike in the event of theft and can locate it. Bike thieves can get lost, then found again! Protect your pride and joy with the Muc-Off Tag Holder. Designed to track your bike down in the event of theft from a long-range. At closer range activate the built-in AirTag speaker to help you better locate the tracker and your bike. HIGHLIGHTS: - Compatible with Apple AirTags (purchased separately) - Fits securely under your bottle cage - Supplied with 2x T25 security 25mm bolts and 1x security key - Non-rattle design to hold tracker securely in place - Tracking device not included with mount! What's Included: - Secure Tag Holder made from precision machined 6061 Aluminium - 2x T25 security 25mm bolts - 1x security key Not Included (Sold Separately) - Apple AirTag
- Pakyak auxiliary battery holder to mount Pakyak auxiliary battery inside the storage box.
- Superlight computer/light mount fits cleanly underneath the stem - Replace a headset spacer(s) below or above the stem on any 1-1/8" steerer - 12mm stack height with 50mm wide mounting area, 120mm long angle adjustable arm
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter
Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter
Keep your handlebar organized and your devices secure with the SWG-400 (28/35mm) SwingGrip from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - On Stem installation only - Lightweight and rustproof alloy construction - Angle adjustable arm design - Aluminum bar is position adjustable and uses Hex Bolt to install and remove
The TPH-1 Tablet Grip from Minoura is the ultimate tablet holder for indoor training. Fitting a diameter between 28mm and 35mm, this stand will fit most bicycles. - Perfect accessory to use with LiveTraining Apps, The Sufferfest videos, or other media - SM clamp easily mounts or dismounts from the handlebar or tube - Spring-loaded clamp system is simple to use and securely holds your device in place - Holds from a 7.9 to 9.7 inch screen with 360 degree rotation system - Can mount to your repair stand so you can easily reference the Internet when working on your bike
Replacement magnet for MSW Miniac Double Speed & Cadence computers. Includes water-resistant cadence magnet and four plastic zip ties for mounting to pedal crank arm.
Handlebar mount to fit Miniac 322 and 333 GPS computers. Fits up to 31.8mm round handlebars. Plastic construction with rubber shim. - Keeps handlebar clean - Adjustable height angle for better visibility during riding - Simple one bolt attachment
Heavy-duty harness for Miniac 7-function computer.
Designed to specifically work with the MSW Double Wireless Cycle Computer, this sensor receives both speed and cadence information and is digitally coded to eliminate electronic interference from other devices. - Strong 2.4 GHz signal allows rear chainstay mounting with fast and reliable transfer of information to the head unit - Includes mounting hardware and shims to fit various diameter and shapes of tubing - Sensor must be paired with specific MSW Double Wireless head unit - 24g
The MSW Computer Spoke Magnet is designed to fit round and bladed spokes of various diameters. - Tool-free installation - Alloy construction - Fits round and bladed spokes
Each GPS unit comes with a Standard GPS Mount. Included are two sets of o-rings (two diameters), plus a backup o-ring in each size, a rubber shim and an X-Lock composite mounting bracket. The rubber shim supports the X-Lock mount which is engineered to attach at any 9° angle and still allow the computer to be mounted forward. The two super durable o-rings secure it to the bar, and the patent-pending X-Lock design will prevent the computer from being knocked out. The X-Lock securely fastens the GPS computer to the mount by pressing down at a 45° angle and rotating it forward until it "locks" into place.
Easily secure your GPS cycling computer to your favorite bike. Includes: - Two sets of O-rings (two diameters) - A backup O-ring in each size
Page 1 of 3 Next page