Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Other

$14.99
You asked for it. This Fork Protector is designed to help prevent scratches from happening to your stanchions. Whether it's from rocks, wear from the adventures of travel, or bug guts during roof rack transportation, this will help protect your fork.
- Fits Fork Stanchion size 32-36mm
- Fits forks up to 180mm in travel
- Weight: 31 grams (pair)

$14.99 - $26.99
Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive.
- 64mm wide x 305mm long
- 3 Extenders included for desired protection

$24.99
Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive.
- 55mm wide x 269mm long
- 14 mils thick polyurethane for durability
- UV Resistant

$39.99
Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive.
- 2 large and 2 medium patches
- 3 small frame protectors
- 2 large frame protectors
$15.00
The Seltzer mount is designed to carry a standard bottle cage and two threaded CO2 cartridges, in a clean and compact way.
- Holds one standard bottle cage
- Accommodates two threaded CO2 cartridges, up to 25g
- Can be installed directly to bottle cage mounts on frame
- Bottle cage and cartridges sold separately

$24.99 - $25.00
The Seltzer mount is designed to carry a standard bottle cage and two threaded CO2 cartridges, in a clean and compact way.
- Holds one standard bottle cage
- Accommodates two threaded CO2 cartridges, up to 25g
- Can be separated and installed directly to bottle cage mounts on frame
- Includes seatpost adaptor and bottle cage bolts
- Bottle cage and cartridges sold separately

$30.00 - $34.99
- Stabilizes bike with double-leg stance
- Fits most 26" and 700c bikes
- Made of lightweight aluminum
- Mounting plate included to fit a variety of bikes

$15.75
Have peace of mind for bigger loads with the 3-band heavy duty universal PakYak Cargo Strap; use it to secure oversized items on the PakYak E+ cargo bike.
- Elastic for versatile usage

$80.00
Show your passengers some love with the PakYak Passenger Seat Pad. The soft cushion has a water-repellent surface and is easy to install and remove. Note: All four PakYak passenger accessories (Passenger Bar, Passenger Seat Pad, Passenger Foot Rest & Wheel Guard) MUST be used in conjunction with one another to safely transport passengers on the PakYak E+.
- Internal cushion absorbs shocks and bumps
- Water-repellent surface means everyone stays dry!
- Easy tool-free installation and removal makes it hassle-free to use
- Recommended for max. 2 kids

$125.00
Safety first, kids! The PakYak Passenger Bar offers a more stable and secure ride for kids on the back of the bike. They have something to hold on to, and you have less to worry about, which means confident riding at every turn.
Note: All four PakYak passenger accessories (Bar, Seat Pad, Foot Rest & Wheel Guard) MUST by used in conjunction with one another to safely transport passengers on the PakYak E+.
- Offers extra safety for children and peace of mind for you
- Foam around the rail for a comfy grip
- Strong aluminum material make it super durable

$137.00
We designed the PakYak Passenger Foot Rest to give kids riding on the back passenger pad added comfort and support, and a place to put their feet. It can also offer additional support for cargo loads. Note: All four PakYak passenger accessories (Passenger Bar, Passenger Seat Pad, Passenger Foot Rest & Wheel Guard) MUST by used in conjunction with one another to safely transport passengers on the PakYak E+.
- Offers stability and safety for passengers
- Durable material for carrying heavy items

$29.99
The solution for protecting your disc brakes during maintenance or transit. The patent pending eye catching design makes life simple, fast and easy to use, Muc-Off's disc brake covers help to ensure you won't have protectant or lube overspray on your discs.
- Sold in pairs
- Protects rotors from lubricant and brake oil
- Fits all MTB and road rotors
- Made from breathable neoprene
- Rinse and hang dry after use

$39.99
- Easy to apply: Simply peel off and install
- Ultra-Tough Cube-Tec protection shields against chain slap, scratches, scuffs, stone chips, cable rub and other damage to your chainstays
- Durable, weatherproof 3M adhesive
- 20-piece pack is designed to fit chain stays and rear stays on most bikes

$44.99
- Easy to apply: Simply peel off and install
- Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips, cable rub and other damage to your forks
- Durable, weatherproof 3M adhesive
- 8-piece pack is designed to fit most front suspension forks

$99.99
- Easy to apply: Simply peel off and install
- Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips and other damage to your frame, toptube, downtube, chainstays and cable rub areas
- Durable, weatherproof 3M adhesive
- 45-piece pack will fit most DH, Enduro & Trail bikes

$99.99
- Easy to apply: Simply peel off and install
- Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips and other damage to your frame, toptube, downtube, chainstays and cable rub areas
- Extra wide downtube pieces to cover wider E-Bikes
- Durable, weatherproof 3M adhesive
- 45-piece pack will fit most E-MTB’s with wider down tubes

$139.95
The Nemo Flyer combines the thickness of an air pad with the plush durability of a foam pad while paying a minimal weight penalty. Flyer uses a new approach that removes 60% of the foam yet tremendously increases thickness and plushness when inflated, producing a 3D sculpted topology for a faster recovery after a hard day on the mountain.
- Plush open-cell foam offers a second level of security on the trail
- New technology allows for the first self-inflated pad to use 3D-sculpting
- Horizontal coring retains a higher R-value with less foam, so you don’t have to sacrifice weight or packed size for warmth
- Ultralight 20D soft-touch fabric set is pliable and comfortable

$8.95
Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.

$12.00
Vinyl adhesive decal, perfect for tool boards, vehicles and trailers. Available in black or white.
Dimensions: 36 x 4.5-inches

$17.95
- Three-color, brushed aluminum Park Tool logo sign measures 21" x 11-1/2" and has holes for hanging

$58.95
The STL-3K is kit that will add a back rest to the STL-1.2 work stool (sold separately). The STL-3K includes a back rest, two steel support bars, and fasteners.
NOTE: The STL-3K will only work on the STL-1.2 work stool. The previous STL-1 work stools will not accept the STL-3K

$88.95
Park's Digital Scale accurately weighs bikes, frames and components. It measures in both pounds and kilograms to the tenth and includes a dual-position, silicon-coated hanging hook. Plus, its unique design allows it to be clamped solidly in a repair-stand and hung from a hook.

$139.95
Park's Adjustable Shop Stool is ideal for quickly maneuvering into the best position when working on your bikes. It's adjustable from 17 to 22 inches high and features 5 smooth-rolling wheels for easy scooting. You'll also love the comfy padded seat with Park's colorful logo.

$139.95
Park's Shop Stool boasts a super-comfy padded seat, sturdy chrome-plated-steel legs and Park's colorful logo on top. The seat spins 360 degrees and is positioned at a height of 32 inches, which is perfect for wheel truing and all other work at a bench or counter.

$8.00
Perfect for keeping cables and cords tucked away or for attaching to your bike frame whatever you deem attachable, these handy Problem Solvers Zip Ties come packed 100 per box.
- 2.5 x 200mm
- Heavy-duty nylon material
- 100 count per box

$19.99
Designed for bartenders, homebrewers, and the kind folks who pour our delicious cold-brew coffee, the Problem Solvers Pedal to Tap Handle Adapter allows thirsty cycling enthusiasts to top their favorite tap handle with the bicycle pedal of their choice.
- Works with standard 3/8" tap handles and 9/16" pedal spindles
- Two configurations, both labeled with "L" or "R", for compatibility with left and right-hand-threaded pedals
- Aluminum construction
- 20 TPI

$39.99
Attach your bike computers, lights, bells, or other bike accessories directly ahead of your ShockStop Suspension Stem. The out-front position keeps things within your line of sight and within easy reach.
Benefits:
- Conveniently place your component directly in front of your stem within easy reach
- 4 different mounting positions let you fine-tune the fit of your bike component
Details:
- Fits ShockStop Suspension Stem only
- 4 different mounting positions
Compatibility:
- 25.4 mm (1-inch) tube diameter allows flexible mounting of most components