Parts & Accessories

B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts

Surly's Dummy Rail Collars are nothing more than a simple clamping device that buttresses the connection between your Big Dummy Frame and the Dummy Rails. They increase the stiffness of the interface of these two parts and help keep your cargo from getting its salad tossed… unless of course your Dummy Bags are filled with tossed salad. These are designed specifically for use with the Big Dummy frame and Dummy rails, and will not work with Xtracycle rails. WARNING: Properly installed Dummy Rail Collars are required for carrying live cargo on your Big Dummy.

Jandd's Rack Bungee is made with flat braided elastic for better load control. - Each strap is made up of 2 lengths of bungee so that the load is held front and back with 1 strap

- Expands up to 2x size to securely grip any shape - Weatherproof material will not deteriorate - Molded non-scratch hooks

For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.

The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads

The MIK Adapter Plate is an ideal accessory if you want to carry your essential items around quickly and easily. It will unlock your ability to customize your storage options on your rack. It’s compatible with removable bicycle accessories and suitable for luggage carrier racks for the MIK system or MIK carrier plate. The MIK Adapter Plate is a must-have for your Vado, Como, or Tero. - Attaches to a wide variety of accessories, including the Turbo Basket and various Basil accessories. - Connects securely to MIK and MIK HD racks or the MIK carrier plate (not included). - 15kg max. load when used on the MIK HD rack. - Allows for fast and tool-less installation and removal. - Includes MIK stick key for increased security.

Jandd Rack Extenders are used for mounting rear racks to braze-on points or the mono-stay adapter. - Sold in Pairs

Fast and easy attachment of Topeak handlebar bags. - Clamp: Fits 25.4/28.6/31.8 mm Handlebars (shims included)

The integrable mesh inner pocket with zipper for the Handlebar-Pack QR. For all small items, such as wallet, snacks, cell phone or keys.

Lower mount kit for all Salsa's Alternator Racks (sold separately)

Stash your ride snacks, repair kit, or other ride essentials in this secure and stylish KEG. - Fits in standard bottle cages - Keeps contents secure and dry - Matches Salsa Dawn Patrol socks, bottle, and hat

Benno Rail Clamps are required to attach the Benno High, Half and Platform rails to the Utility Rack. - For Boost E 2020 and newer

Extend the life of your Dummy bags with this replaceable wear patch.

Dummy Rails support Dummy Bags on your Big Dummy cargo bike, and Surly's Dummy Deck bolts directly to them, stiffening the whole system for a more stable load. Dummy Rails are made of light, strong aluminum and were designed in conjunction with the Dummy Deck and Dummy Bags; each component works best when used with the others. Like all Surly products, they've built in lots of useful details. For example, the deck-attachment bosses stick up from the rails to create space between the deck and rails, providing windows to route tie-down straps and cordage; and threaded bottle cage bosses located at the rear of each rail provide mounting locations for accessories: bottle cages of course, or lights, cameras, pumps, flags, horns, light saber scabbards, disco balls, spittoons, cornucopias, etc. Dummy Rails will work with cargo frames (including the Surly Big Dummy) built around Xtracycle's longtail standards.

Surly Front Rack Hardware

- Fits Salsa Minimalist and Alternator Racks - 8mm x 370mm

Axiom's Elastic Cargo Net keeps your cargo in place. Its 6-hook design and shock cord construction make it a flexible fit for most every rack and basket. Designed for baskets and racks, this durable shock-cord net holds cargo securely in place while sturdy hooks ensure years of reliable performance. - Durable elastic shock cord. - Anti-rust steel hooks. Features Fits most baskets. Can be used on rack platforms to hold odd shaped items, like soccer balls, or backpacks.

This mounting set allows you to attach your Saddle-Bags to other bicycles. For all Saddle-Bag, MudRacer and Micro models. - 1 mounting set for Saddle-Bags, including screws

Replacement hardware, bolts and nuts for Wald baskets. Works with Wald Basket models: 520, 520GB, 535 and 535GB

- Interface plates for luggage carrier rack to convert any non MIK ready carrier & non MIK ready bicycle bag to a MIK system (for use with Basil bags only) - Compatible with luggage carriers from 80 up to 150 mm - -01: carrier plate for rear racks that are not MIK ready. - -02: adapter plate for bicycle rear bags that are not MIK ready - Suitable for e-bikes - Max load: 26lbs/12kg

Benno Rail Clamps are required to attach the Benno High, Half and Platform rails to the Utility Rack. - For Boost E 2020 and newer

The Benno Half Rail Plus attaches to the platform rack providing stability for rack passengers. The half rail design provides easier access for ingress and egress. Make sure that no parts of the body or clothing come near moving parts on the bicycle, such as chain, spokes, tires or brakes.

The Benno Platform Rail Plus affixes to the Utility Rack to provide additional stability for bulkier loads, extending the rack plaform area to 55cm x 72cm.

Benno Rack Pads affix to the Utility rack models with hook and loop fasteners creating a seating platform for passengers. - Use only with Benno High, or Half Rails, Wheel Guards. - Make sure that no parts of the body or clothing come near moving parts on the bicycle, such as chain, spokes, tires or brakes

Compatible with Shiner and Shiner Back lights - Rubber pad with loop straps to quickly mount and remove light for recharging - 50mm bolt spacing to fit most rear racks

The Jandd Reflector Mount allows riders to attach a reflector to a rack.

Benno Rack Pads affix to the Utility rack models with hook and loop fasteners, creating a seating platform for passengers. - Use only with Benno High, or Half Rails, Wheel Guards. - Make sure that no parts of the body or clothing come near moving parts on the bicycle, such as chain, spokes, tires or brakes

Jandd Mono-Stay Rack Adaptor is used for bikes that have a wishbone-style configuration on the rear end.