Tools

Park Tool's Utility Pick Set is a set of three unique, multi-purpose picks ideal for a wide variety of detail work. Features: • Aluminum handle with magnet • Picks are replaceable, cold formed, heat treated and polished high carbon steel • Set includes 1-straight, 1-hook and 1-90 degree pick

Park Tool's professional-quality Snap Ring Pliers are made from forged, heat-treated cro-moly steel with a return spring and vinyl-dipped grips. The RP-4 has 1.7mm tips on bent nose blades for larger, internal snap rings. The tips open from 21mm down to 2mm (center to center).

Dial Indicator Set bolts directly to the DT-3 allowing for greater accuracy and a way to measure results. Now includes an elongated, cylindrical tip that is large enough to work around voids in most rotors.

The CRS-15EXT includes a tube and fitting to extend any CRS-15 to work on fork steering tubes up to 425mm.

No more need to hold wheels between your knees, balance on a bench top or ask for help. The WH-1 Wheel Holder firmly holds thru axle and quick release wheels at three convenient positions. It’s like having a strong helper to hold wheels during cleaning, tire and tube work, hub work, cassette work, and tubeless installation. The WH-1 can be bolted or clamped directly to a bench or installed in a bench vise. Uses and Features: - Quick and easy access to hold virtually any wheel to perfectly position your work for a variety of tasks including but not limited to: - Wheel building -Cassette removal and installation - Tire and tube removal and installation - Tubeless tire work - General cleaning - Hub work - Holds wheel at vertical, 35 degrees from vertical, and horizontal positions - Accepts 12, 15, and 20mm thru axles and 5mm skewers - E-Nickel finish for durability

Wheels Manufacturing Sealed Bearing Extractor - 15mm Fits the following bearings: - 6002 - 6702 - 6802 - 6902 - 15267 - 15268

- The crank puller is designed to remove standard square spindle cranks. With help of the included adaptor other standards such as ISIS and Octalink cranks can also be removed.

Flat wrench inserts from Wolf Tooth turn your flat wrench into many other tools. - All inserts are 1 inch hex drive interface compatible - Design and manufactured in Minneapolis, MN USA - Nickel plated 4140 chromoly steel

The Pack Hanger Alignment Tool allows quick adjustments to be made to the derailleur hanger while on the trail or in the workshop. Alignment fixes are quick and intuitive, as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. This new tool has included options for QR and thru axle. And for simple and durable storage, the components of this tool also nest inside of the handle. - Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle. - Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing. - Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required. - Works on 12mm thru axle and 5mm quick release bikes

Professional quality T-Handle hex wrench built for speed, efficiency, leverage and a perfect fit. - Carefully selected combination of Chrome Vanadium and S-2 tool steels - Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless - Machined, chamfered tips allow easier insertion into hex fittings - Integrated “Strip-Gripper” twisted hex that makes removal of most bolts with stripped or oversized hexes fast and easy - Sliding T-handle creates increased leverage and multiple access positions

- Essential mechanic tools to properly service and maintain all RockShox products - Clamps the shock body for easy maintenance

Precision brake bleeding tools and adaptor kits for Magura brake systems. - Consumer level bleed kit

Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally. - Repairs large punctures and slices - Reacts with Stan's sealant to form an instant, airtight seal - Barbed plastic tip anchors into tire and will not pull out when riding - Flexible material and laser-cut shape conforms to puncture and bonds with sealant - Wears off clean, no trimming needed, and can not be felt while riding, even on road tires - Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover - Includes two pre-loaded DARTs for sealing multiple and larger punctures - Clear caps keep DARTs clean and unthread quickly for fast deployment - Simple and easy to refill

- Foldable and precise tool, used for re-aligning rear derailleur hangers and maintaining precise gear shifting - Compatible with all wheel sizes from 20? to 29?+ and screws directly into rear derailleur hanger threads - Precise measuring gauge can be locked in place, so you don´t lose you measurement when you push it against the wheel in different positions

Magura Slotted Nut Bit is designed for use with brake lines. - 8mm slotted sleeve nut bit for tightening your brake hose sleeve nut to accurately compress hose fittings

- Pike Dual Position Air A1 1 year service kit - Includes dust seals, foam rings, o-ring seals, Charger sealhead

Attractive, durable foam-lined zipper carry case. Perfect for protecting your tool and keeping your bits within easy reach. 12 of the most common Bit sizes for bicycles are included inside. Weather-resistant case materials and impact protection make this the perfect case to add to your toolset-to-go. A complete pocket multi-tool! Three-way pocket Ratchet with Extension and T-Handle function, all in a compact, lightweight design to carry on your bike! The Patented reversible thumb-wheel ratchet head is rated to up-to 60Nm of total force, so this tool can even be used to install and remove Pedals. A high quality, durable tool. Prestacycle T-Handle 3 way Ratchet is compatible with all tool bit sets from Prestacycle and all standard ¼ bits. The patented Ratchet head firmly holds bits in place without a magnet. Releasing the bit is simple with a finger-press into the hole on the top. The ratchet offers an easy to use thumb wheel to speed screw installation and removal. The ratchet reverse knob is easily accessible right on top of the tool. Highest quality bits Prestacycle offers the highest possible quality 1/4" hex tool bits for use on Bicycles and much more. Our bits are compatible with all Prestacycle hex-based hand tools, and are industry-standard to fit all other tools that use 1/4" hex bits. Engineered for long life All Prestacycle Professional bits are made with hardened S2 steel, which is much stronger than most hand tools which are made of CRV Steel. S2 steel also resists stretching, preventing rounded edges on the bits that could damage bolts. We apply nickel-plating to all Professional bits to prevent marring to Stainless Steel, Aluminum and Titanium screws and to provide a long-lasting finish. Specific hex bits have micro surfacing to reduce slippage when in use. Specifications: - Carry-along pocket Ratchet with 1/4" bits set - Remove and install all kinds of Bolts and Screws on your Bike - Slimline 100mm Extension can also be 50/50 installed to use as a T-Handle. - Patented Reversible Ratchet with thumb wheel. - Heavy-duty design withstands up to 60Nm of force. - Uses standard 1/4" Hex bits of all sizes. - Dimensions 4.5" x 5/8" x 7/16" (119mm x 16mm x 12mm). - Tool weight (including extension) is only 88 Grams! - 12 piece Bicycle Tool Bits set - Precision tools in 12 unique sizes specific for bicycles - Hardened steel bits are non-marring on titanium and alloy bolts - Trim-able bit carrier for a custom tool-set to-go Sizes: - HEX: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm - TORX®: T10, T20, T25, T30 - SCREWDRIVERS: PH1

Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.

RockShox 30mm Seal Kit

• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus

Zyklop Metal ratchet with switchover lever. Slim design for work in even very confined spaces. The 72 fine-pitched teeth allow a small return angle of 5 degrees. Comes with a switchover lever for convenient direction change and secure socket locking function. Forged, full metal ratchet (chrome-molybdenum steel) for particularly high robustness and long service life.

When a flat strikes, this organized kit will get you rolling in no time. Kit Includes: - Control Blast 0 Inflator Head - Mtb Kit: (65067) 2, 25G Threaded Co2 Cartridge - Road Kit: (65066)2, 16G Threaded Co2 Cartridge - Ratchet System Multi-Tool (2, 2.5, 3, 4, 5 ,6Mm Hex, T10, T25 Torx And Flathead) - Liv Tire Levers

If there ever was an underrated tool that you probably don’t have in your bike tool kit, it has to be the Valve Core Wrench. Designed to remove or install Presta Valve and Schrader Valve cores, this tiny tool can truly make the process of installing or refilling flat-prevention liquids and gels quick and painless. The versatility of the valve stem tool supports both valve types found on mountain bikes, road bike, commuting and electric bikes – never be stranded on your commute thanks to the Valve Core Wrench. Available separate, or found in our Team Edition and Ride Prep Tool Kits. - Fits Presta Valve and Schrader Valve bike tubes - File tread grip creates a comfortable and ergonomic grip - CRV tool steel metal core makes this a one-time purchase - Aides in the overhaul of suspension forks and rear suspension shocks - Found in our Ride Prep and Team Edition Tool Kits - Limited Lifetime Warranty

Introducing the first everyday carry, ride-ready tool kit from Feedback Sports. Featuring a compact, modular ratcheting handle, 25mm extension socket, 5Nm click-torque extension socket, and ten of the most commonly used bits, this mini ratcheting wrench kit is made for making safe and secure mid-ride repairs. The included padded case is ideal for carrying in a jersey pocket, travel kit, or keeping with you at all times, for any occasion. Features: - Kit includes ratchet handle, 25mm extension, 5Nm click-torque extension, and 10 bits. - Ratchet wrench for speed; torque extension for precision. - Portable and light – easily fits in a jersey pocket, ride pack or travel kit. - 5Nm click-torque extension for safe, precise, and secure tightening of sensitive parts. - 2-way ratchet wrench can be used without torque extension for rapid fastener take-up and loosening. - Bit extender can be used in "T" handle, "L" handle, or "I" handle (in-line) configuration to suit any task. - 6-degree ratchet engagement maneuvers in tight spaces. - Compact head and bit design allows clearance and full function in tight spaces. - 10 labeled S2 Steel bits covering the most common bicycle applications. - S2 Steel is an industry-leading tool steel made for precise edges, exact fitment, and durable working surfaces. - Hex: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm; Torx®: T10 , T25, T30; Flat: 3mm.

- Designed for a perfect fit on Giant WheelSystems - Safe for use on carbon rims - Ideal size for storage in saddlebags or pockets - Ergonomic shape makes it easy to remove tire - Reinforced nylon for best durability

The majority of bicycle maintenance is detail work, and our precision 3-piece Screwdriver Set is an ideal companion for bike shops, home mechanics and race-day service. Ergonomic file tread grips promote control and comfort – preventing hand fatigue. Plus, magnetic tips are precision machined to exceed both JIS and ISO standards and fit perfectly in component and accessory fasteners. This 3-piece set comes complete with #0 and #2 Phillips, 6.5mm flathead, and a Shimano crank cap tool. Available as a set, or found in our Team Edition Tool Kit. - Hardened CRV tool steel ensures longevity of precision tips - Phillips #0 exceeds ISO standards – designed for small components and frame fittings - Phillips #2 exceeds JIS and ISO standards for derailleur-specific fittings - 6.5mm flathead exceeds ISO standards and serves countless service procedures - Shimano crank cap tool rests on the handle end of the #0 Phillips - Magnetic tips help hold screws flush and in place during complex procedures - Ergonomic file tread grips promote precision and control and prevent hand fatigue - Available in our Team Edition Tool Kit

Thin, light and minimalist design. - 5-year warranty - Hex wrenches : 2, 2.5, 3, 4, 5, 6, 8mm - Screwdrivers : Phillips #2, flat #2 - Torx : t-25 - 8-12 speed chain tool is incorporated into the case - Spoke wrench : #0, 1, 2 & 3 - Magnetized storage case can be used as a handle for extra leverage

The V Pro bike multi tool series includes a refined collection of tools developed for today's modern bicycles. Each model is designed and manufactured in-house and engineered to efficiently repair most road or trailside mechanicals. The machined steel tool bits are now longer and introduce our Black Anti-Corrosion technology, which provides superior corrosion resistance. The machined aluminum side plates are anodized black and deliver a compact, comfortable feel during use. With unmistakable Lezyne styling, the lightweight V Pro tools offer amazing value and functionality for all types of cyclists. - CNC 7075 alloy side plates - Anti-corrosion black chrome vanadium fastening hardware - Enhanced anti-corrosion black chrome vanadium bits - Hex 3/4/5/6mm - T10/T25 - Phillips - 65g

- Paintbrush-like shape for easier application and cleaning

- Used to install fork dust seals

- 200 Hour/1 Year Service Kit for Deluxe/Deluxe Remote A1-B2 (2017-2020)/Deluxe Nude B1+ (2019+) - Includes Air Can Seals, Piston seal, Glide Rings, IFP Seals, Remote Spares

When you are installing headset cups into your bicycle frame or a crown race onto your fork, there is only one way to get the job done right. Use an appropriately-sized Cane Creek installation tool, or risk damaging your frame and/or fork. The headset cup installation tools are designed to be used with a headset press, sold separately.

Finish Line's Gear Floss is the ultimate detailing tool, perfect for cleaning your cassette, chainrings, derailleur pulleys, hubs and all those hard-to-reach nooks and crannies. Made with microfiber, it works by attracting and capturing dirt, grease and particles inside its star-shaped grooves. Each package has 20, 20-inch-long ropes that are washable and reusable.

- Pocket sized chain tool that mates perfectly with Topeak ratchets and torque tools - Compatible with single and multispeed chains up to 12 speed including Capagnolo chains - Includes a 4/5mm allen key and a chain hook as well as a rubber clip to hold

Park Tool's Right Hand Bottom Bracket Tap is a replacement tap for their BTS-1 Bottom Bracket Tap Set (sold separately). This tap is used on the non-drive or left side of the bike, which uses a clockwise or "right hand threading." Two taps are required for use.

World-famous Park Tool quality wrapped up in a combination metric wrench. Features both open and 12-point two-way ratcheting box ends. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip. Strong, comfortable, and beautiful!

Park Tool's Fork Threading Set is designed for cutting new threads and for chasing existing threads on fork columns that are not chromed. The FTS-1's expandable cutting dies are made from the highest quality high-speed steel for precision cutting and long life. The unique thread guide system used with the FTS-1 is specially designed to allow the metal chips and shavings that result during use to fall completely through the guide, preventing damage to the fork threads and the tool. The FTS-1 includes: • Die handles • 1" x 24 tpi cutting die (Part #606) • 1" cutting guide (Part #610) Accessory dies and guides are also available separately: • 1-1/8" x 26 die (Part #607) • 1-1/8" guide (Part #611) • 1-1/4" x 26 die (Part #608) • 1-1/4" guide (Part #612) Die handles fit all three sizes of dies and guides.

World-famous Park Tool quality wrapped up in a great set of metric combination wrenches. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip.

Precisely machined for a perfect fit, this 8-notch tool removes and installs the lockring that retains front chainrings found on Bosch Gen 2 e-bike motors after the crank arm is removed. - Fits Bosch Active Line (chainrings less than 20 teeth), Performance Line and Performance Line CX models - For lockrings with 50mm outside diameter and 8 notches - Replacement for Bosch 0275009003 tool - Torque wrench compatible 3/8-inch square drive - Constructed of 4140 heat treated steel and plated for long life

The 15-inch SWB-15 is a forged steel breaker bar with a 3/8-inch square drive head that pivots 180º. Features a long, knurled handle, which is extremely useful when extra leverage is needed to remove stubborn fasteners.

Park's Double-Ended Cone Wrenches are designed for home mechanics. They're made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on a variety of bearing assemblies. Each wrench is chrome plated for long life and available in popular combinations from 11 to 18mm. Most applications require a pair of cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

The Park Tool FWS-2 Fold-Up Wrench Set combines all the popular hex and Torx compatible wrench sizes of the AWS-10 and TWS-2 into one convenient set. The multi-position shop grade fold-ups are comfortable, lightweight, slip-resistant, and 40% stronger than steel handles. Made in USA.

Material: premium chrome vanadium steel

With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The TW-6.2 is a high-quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). Designed for higher torque settings for repairs and installation in the bottom bracket, cassette lockring and other areas that use a higher torque settings. For lower torque setting, see the TW-5. Comes with its own protective case. - 10–60 Newton meter range (88–530 Inch Pounds) - Adjustable in 0.25 Nm increments - Ratcheting 3/8" drive - Reads and registers for both left hand and right hand threading - Dial-adjust system allows desired torque setting to be preset - Calibrated to be accurate to +/- 4% - Length: 36.2cm (14.25")

Wheels Manufacturing Over Axle Adapters are used for pressing your most commonly used bearing sizes into place. Each represents an excellent addition to the Press-4 Bearing Press. - Adapters sold individually

The Feedback Sports Chain Tool 3.0 is designed to work with 1–12 Shimano, 1–12 SRAM, and 13 speed Campagnolo. Features a 360 degree backside plate support structure to ensure chain pins are pressed perfectly, every time. - Oversized, comfortable, knurled texture rubber handle provides secure grip - Broad, high-leverage pin press paddle makes quick work of the most stubborn chain pins - Soft close push pin handle - CNC-machined pin driver threads provide deliberate and consistent pressure for efficient pressing - Compatible with Shimano and SRAM 7, 8, 9, 10, 11, 12 speed chains, and single-speed style chains - Extra replacement pin included, conveniently secured inside storage cavity in the handle - Limited lifetime warranty; fully serviceable

Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.

Park's Bladed Spoke Holder is a must for building and truing wheels that feature bladed spokes. It has 4 different size slots to fit a wide variety of bladed (aero) spokes from .08 to 2mm wide. It holds them safely in place to prevent twisting as you turn the nipple to true and tension the wheel.

Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.

- Specifically designed for changing brake lever blades on all MT series brakes

Thru Shaft Bleed Plug (Required for Thru Shaft 200 hour service) - RE:Aktiv Thru Shaft Shocks

The Muc-Off 8 in 1 Bicycle Cleaning Kit is perfect for any lover of bikes. Complete with Muc-Off's Nano Tech Bike Cleaner, Expanding Microcell Sponge, Soft Washing Brush, Detailing Brush, Claw Brush, Two Prong Brush, Bike Spray and Storage Tub this kit has pretty much everything you need to keep your bike looking nice and tidy. It makes a great Christmas or birthday gift for your bicycle-obsessed friends and family. This kit isn't style-specific either. No matter if you're into Road, MTB, Cyclocross or just getting from A to B, this 8-in-1 kit solves even the most annoying bike cleaning problems!

Wera ZyklopT-handle for higher torque transfer. For 3/8" square sockets with ball lock. Adjustable drive for more flexible usage. - 3/8" Zyklop T-handle with adjustable drive - For 3/8" square sockets with ball lock - High-quality chrome vanadium steel, matte chrome-plated - For higher torque transfer

Park's Shop Screwdrivers are pro-quality tools featuring durable and precise heat-treated chrome-vanadium tips and shafts and dual-density handles for an excellent grip.

200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) - Recon RL/TK A1 (2018+)

- Specifically designed for quick and easy installation and removal of various bicycle parts and accessories - Ergonomic dual-density screw driver handle - Features extra long hex key and second ball-end - Designed to stand up to the harsh conditions of professional use

- Investment cast, heat-treated tool steel wrench features 3-side and 4-side openings. - Durable plastic handle reverses to provide ideal ergonomics with both openings. - Precision-cut wrench openings are perfectly sized for fit and speed. The Pro Spoke Wrench takes ergonomics and versatility to the next level. The dual-sided design, with both 3-side and 4-side openings, features a reversible handle. When using either wrench opening, the curved and sculpted plastic handle fits perfectly in your fingers and positions them on either side of the spoke for ideal leverage and control. The wrench is investment cast, heat-treated steel ready for years of service and the precision-cut openings are perfectly sized for fit and speed.

Rear Shock IFP Puller (for removing IFP) - SuperDeluxe/SuperDeluxe Coil/Thru Shaft

200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) - Revelation RL A1 (2018+)