Torque wrenches are an essential bicycle tool. The increase in carbon fiber bikes and components have driven this need. While carbon fiber allows for more optimal design and provides higher strength to weight ratio compared to steel and aluminum, it is also more susceptible to crushing and cracking when improperly set up. Pedro's Fixed Torque Drivers are shop quality preset torque wrenches designed with an infinite torque-limiting clutch design to eliminate over-torquing of critical parts. Each wrench is calibrated using a torque calibration analyzer accurate to +/- 1% and is then tested 5 times prior to packaging with results recorded on the product card along with the date. A magnetic socket drive accepts standard 1/4" hex bits and 4mm, 5mm, and T25 bits are included with each wrench. The ergonomic handle design provides comfort and control ready for daily use while also storing two extra bits. - Infinite torque-limiting clutch design eliminates over-torquing - Magnetic socket drive accepts standard 1/4" hex bits. 4mm, 5mm, & T25 bits included - Ergonomic handle design provides comfort and control and stores extra bits
The DT-5.2 is engineered and built to accurately face front or rear disc brake mounts so they are precisely aligned to the rotor. - Faces any IS Mount, Post Mount, or new Shimano Flat Mount, including low clearance, chainstay mounts - Telescoping axle adaptors allow use with any configuration of open or thru-axle dropouts and dropout widths (including Boost 110, Boost 148 and all fat bike axles) - Includes two facing cutters: IS Mounts Post and Flat Mounts - Includes storage case
Flat, compact design is ideal for the minimalist who wants an essential set of ultra-light tools on the road or trail. - 2/3/4/5/6mm hex wrenches - T25 Torx wrench - Standard & PH1 screw drivers - 80g
Carry the essential roadside/trailside tools with the MSW Tool Hugger Kit. The Kit includes all the basics for quick repairs: CO2 cartridges, inflator head, tire levers, mini tool, and patch kit. Bring along your own tube and roll them all up in the Tool Hugger Wrap, which attaches to standard saddle rails, or just toss it into a jersey pocket. - Durable Cordura outer layer - Seven elastic tool compartments - Hook and loop closures
Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also fits Shimano disc brake lockrings - Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut
Includes two rotating brushes, two sponges and two wicking pads already installed in a composite cartridge, ready to snap into the CM-25 Professional Chain Scrubber (sold separately.
Pedro's Toothbrush is designed to tackle the drivetrain and is ideal for cleaning chains, cogs, derailleurs, and chainrings. The ergonomic handle is paired with two purpose-built brush features. The tapering-length bristles up front are designed to scrub the intricate surfaces of chains, chainrings and cassettes while at the opposite end, longer, stiffer, larger-diameter bristles reach deep between the cassette cogs to remove even the deepest dirt and grime. - Durable double-ended brush - Ideal for chains, cogs, derailleurs, and chainrings - Recommended for use with Pedro's cleaner and degreaser products (sold separately) - Solvent-resistant synthetic handle and bristles - Not recommended for oral use
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.
Lezyne's 3-Way Spoke Wrench packs three frequently used spoke wrench sizes into the palm of your hand. It features CNC-machined wrench faces for precise tool engagement of each 3.22, 3.30, and 3.45 size.
The Lezyne EXBBT-CLT Two-Way Tool integrates an external bottom bracket cup and cassette lockring tool into one dual purpose unit. It works perfectly with Lezyne's 32mm CNC Rod (sold separately) or an adjustable wrench. The tool is made of durable, forged, and heat treated steel that is CNC machined for extremely accurate engagement. It is compatible with most external bottom brackets and cassette lockrings.
CRKT M-16 Knives are rugged, lightweight, and built for function. Features - Dual hollow grind, Tanto-style blade with Combined Razor-Sharp and Triple-Point Serrated edge - AutoLAWKS knife safety technology automatically actuates when the blade is open, this provides a virtual fixed blade when locked - InterFram features textured, glass-filled nylon scales and a dual stainless steel liner for lightweight and rugged results - Carson Flipper speeds opening of the blade and acts as a blade guard when the blade is open - Lubrous washers at the blade pivot and an adjustable pivot screw allow for perfect blade action - High-carbon, stainless steel blade offers a combination of toughness and edge-holding ability - EDP Finish for a non-reflective tactical look (black blade, black frame, and black hardware) - Every Day Carry (EDC) - Removable, stainless steel clothing/gear clip included Specs - Blade Thickness: 0.1" - Weight: 2.3oz - Closed Length: 4" - Edge Type: Serrated - Overall Length: 7.125" - Handle Material: Nylon - Blade Length: 3" - Blade Material: Stainless Steel - Knife Type: Locking Folder
- Use to install fork dust seals
The Problem Solvers Holy Driver is a durable chromoly tool used for holding and turning spoke nipples when building wheels and fixing them. You can use it manually, spinning it in your fingers to quickly fasten nipples. And, you can use it in a power drill for even faster wheel work. The tool tip fits into the slot in the top of the nipple and holds securely. Plus, the length is adjustable so it's great for use on standard and deep-profile rims.
$17.00 - $39.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
$8.95 - $9.99
Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.
Wheels Manufacturing open bore adapters are used to press sealed cartridge bearings into place. The adapters are machined with one step to correspond to the bearing OD, which fits in to the center of the sealed bearing and an outside diameter to accommodate the bearing's outer diameter. Size: [Bearing inner diameter] x [Bearing outer diameter] Note: If only one dimension is given, that is the outer diameter of the adapter, with no inner diameter step
$12.99 - $14.99
The ultimate trailside companion. This high-tensile steel multi-tool features a precise fit and finish and side grips for a secure handhold even with gloves on. The M5 includes: Hex wrenches: #3, 4, 5, 6 Screwdrivers: Phillips #2 Length: 89mm Weight: 85g Warranty: Lifetime
$13.99 - $29.99
The Finish Line Absorb-It Mat is the perfect way to keep any work area clean. Designed with special absorption fiber technology, the Absorb-It Mat absorbs and traps chain lubricants, cleaners, degreasers, brake fluid and hydraulic oils. The combination of absorption fibers and a leak-proof poly liner make the Absorb-It Mat perfect accessory when degreasing & lubricating bicycle chains. Use the Absorb-It on a work bench, under an automobile to catch leaking fluids, in a car trunk to prevent stains, in a chemical storage cabinets, or under a trainer to catch perspiration. The Absorb-It Mat comes in two different sizes: 48" X 18" and 60" X 36. The 48" x 18" will absorb and trap up to 11iter of fluids. The larger 60" x 36" will absorb and trap up to 2.5 liters of fluid. Both mats can be cut with a scissor to fit in custom areas.
SRAM's Disc Brake Bleed Kit has everything you need to ensure your brakes are dialed. The kit is compatible with SRAM X0, XX, Guide, and HydroR brakes. It is not compatible with RockShox' fork bleed kit. Includes the following: • 2 syringes/fittings • bleed blocks • Torx tool • Crow's foot • Bleeding Edge Fitting • DOT 5.1 hydraulic fluid
- Anodized aluminum construction. Includes mounting hardware - Measures threads for all cones, locknuts and axles - Metric measurement on one side and Standard on the other side
• Essential mechanic tools to properly service and maintain all RockShox products • Clamps the shock body for easy maintence
Shimano Wiring Plug Tool for use with Di2 - Tool is required to assist Di2 shifter plug installation - Shimano TL-EW02 tool for connecting and disconnecting the Di2 wiring harness and shifter plugs - For use with Dura-Ace 9070, Ultegra 6870/6770 and Alfine Di2 components and E-Tube wiring
Wheels Manufacturing Sealed Bearing Extractor - 10mm Fits the following bearings: - 6704 - 6804 - 6904
Replacement handle assembly for Wheels Mfg. large sealed bearing press (PRESS-1). Primarily designed for pressing bearings into hubs. Note: rod diameter is smaller than the hole size in Wheels Mfg. universal bottom bracket drift. Includes: - Machined fixed end aluminum "T" handle with brass insert - Machined non-fixed end aluminum "T" handle with brass insert - 3/8" x 12TPI threaded rod - M5x12mm flat head screw to secure fixed-end handle to rod
Easy-to-use tool removes and installs replacement bushings in suspension and shock pivots. Includes retaining tool, top cap, and three sizes of bushing drifts. - Fits eyelet sizes - 10mm, 12mm, and 1/2" - Machined aluminum - Anodized Red
Park's Hydraulic Brake Piston Press is used to set or reset the piston(s) inside hydraulic disc brake calipers during installation, maintenance and repair. Just push it into the caliper to wedge the piston into place. It's made of tough tool steel with a comfortable and oversize rubber handle for a great grip.
Park's Bladed Spoke Holder is a must for building and truing wheels that feature bladed spokes. It has 4 different size slots to fit a wide variety of bladed (aero) spokes from .08 to 2mm wide. It holds them safely in place to prevent twisting as you turn the nipple to true and tension the wheel.
Park's FR-8 Freewheel Remover fits flip-flop BMX hubs with 30 x 1mm threads. It can be held with a wrench or vise, and its narrow profile allows use without removal of cones and locknuts.
Park's versatile Headset Wrench is constructed from hardened, laser-etched steel for the maximum in durability and precision. The HCW-15 is a dual sided wrench that features a 32mm opening on one end and a 36mm opening on the other.
- Spoke thread treatment for DT-Swiss by Loctite - Use with light oil for a secure, re-trueable wheel or use by itself for a maximum bond