Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Full-Suspension

Cannondale Moterra 3
$6,000.00
Moterra is an e-mountain bike with infinite capability. The shackles are off, now go ride the unrideable, over and over again. Moterra is all-mountain ready, built to go hard with 160mm of trail-crushing, dialed suspension. With big, grippy tires, properly wide bars and short stems, powerful brakes and dropper posts, and a water bottle in the front triangle, Moterra is ready for the good stuff. Utilizing size-specific Center-of-Gravity data, the Proportional Response suspension linkage is tailored by size so that every rider experiences optimized suspension performance while braking, climbing, and descending. Our Ai Offset Drivetrain opens up the rear triangle for more tire clearance while keeping the chainstays short for nimble agility. A stiffer, stronger rear wheel is just icing on the cake. A Carbon frame keeps the mass to a minimum. But since our engineers prioritized durability over gram-counting, confidence is built-in (and so is a lifetime warranty). To protect the motor and battery from damage, Moterra features a sealed battery cover and a burly, trials-style skid plate. Proprietary Cannondale motor mount positions the Bosch drive unit low and forward in the frame, keeping the Center of Gravity low and the chainstays short for uncommonly agile handling. LockR pivots enable a thru-axle pivot system that creates a rock-solid connection between both sides of the swingarm for instantaneous response. No twist, no flex, and no special tools required. - Carbon front triangle, SmartForm C1 alloy rear triangle - RockShox 35 Gold RL, 160mm suspension fork - RockShox Deluxe Select R, DebonAir rear shock - WTB ST i29 TCS wheels - SRAM SX Eagle drivetrain - SRAM Guide RE hydraulic disc brakes - Bosch Performance Line CX 250W motor
Cannondale Moterra SE
$8,500.00
Moterra is an e-mountain bike with infinite capability. The shackles are off, now go ride the unrideable, over and over again. Moterra is all-mountain ready, built to go hard with 160mm of trail-crushing, dialed suspension. With big, grippy tires, properly wide bars and short stems, powerful brakes and dropper posts, and a water bottle in the front triangle, Moterra is ready for the good stuff. Utilizing size-specific Center-of-Gravity data, the Proportional Response suspension linkage is tailored by size so that every rider experiences optimized suspension performance while braking, climbing, and descending. Our Ai Offset Drivetrain opens up the rear triangle for more tire clearance while keeping the chainstays short for nimble agility. A stiffer, stronger rear wheel is just icing on the cake. A Carbon frame keeps the mass to a minimum. But since our engineers prioritized durability over gram-counting, confidence is built-in (and so is a lifetime warranty). To protect the motor and battery from damage, Moterra features a sealed battery cover and a burly, trials-style skid plate. Proprietary Cannondale motor mount positions the Bosch drive unit low and forward in the frame, keeping the Center of Gravity low and the chainstays short for uncommonly agile handling. LockR pivots enable a thru-axle pivot system that creates a rock-solid connection between both sides of the swingarm for instantaneous response. No twist, no flex, and no special tools required. - Carbon front triangle, SmartForm C1 alloy rear triangle - RockShox Boxxer Select Charger RC, 180mm, DebonAir dual-crown suspension fork - RockShox Super Deluxe Select rear shock - Stan's NoTubes Flow S1 wheels - SRAM GX/NX Eagle drivetrain - SRAM Code R hydraulic disc brakes - Bosch Performance Line CX 250W motor - Bosch PowerTube, 625Wh battery
Cannondale Scalpel Si Carbon 2
$7,150.00
An exciting, exacting XC racing bike designed to conquer the aggressive terrain of modern World Cup courses. - BallisTec carbon frame - Lefty Ocho Carbon 100mm-travel suspension fork - Fox Float DPS Performance EVOL rear shock - HollowGram 23, Superlight Hi-Impact Carbon wheelset - 12-speed Shimano XT/XTR components - Cannondale 1 carbon handlebar - Cannondale 2 carbon seatpost - Shimano Deore XT hydraulic disc brakes
Cannondale Scalpel Si Carbon 3
$6,000.00
An exciting, exacting XC racing bike designed to conquer the aggressive terrain of modern World Cup courses. - BallisTec Carbon frame - Lefty Ocho fork - Fox Float DPS Performance EVOL shock - HollowGram 23, Superlight Hi-Impact Carbon wheels - SRAM X01/GX Eagle drivetrain - SRAM Level TL hydraulic disc brakes
Cannondale Scalpel Si Carbon 4
$4,500.00
An exciting, exacting XC racing bike designed to conquer the aggressive terrain of modern World Cup courses. - BallisTec Carbon frame - Lefty Ocho fork / RockShox Monarch RL shock - Stan's NoTubes Crest S1 - SRAM GX/NX Eagle drivetrain - SRAM Level TL hydraulic disc brakes
Cannondale Scalpel Si Carbon Women's 1
$6,000.00
An exciting, exacting XC racing bike designed to conquer the aggressive terrain of modern World Cup courses. - BallisTec Carbon frame - Lefty Ocho fork - Fox Float DPS Performance EVOL shock - HollowGram 23, Superlight Hi-Impact Carbon wheels - SRAM X01/GX Eagle drivetrain - SRAM Level TL hydraulic disc brakes
Cannondale Scalpel Si Carbon Women's 2
$4,500.00
An exciting, exacting XC racing bike designed to conquer the aggressive terrain of modern World Cup courses. - BallisTec Carbon frame - Lefty Ocho fork / RockShox Monarch RL shock - Stan's NoTubes Crest S1 - SRAM GX/NX Eagle drivetrain - SRAM Level TL hydraulic disc brakes
Cannondale Scalpel Si Hi-Mod 1
$8,800.00
An exciting, exacting XC racing bike designed to conquer the aggressive terrain of modern World Cup courses. - BallisTec Hi-Mod carbon frame - Lefty Ocho Carbon 100mm-travel suspension fork - Fox Float Factory DPS EVOL rear shock - HollowGram 23, Superlight Hi-Impact Carbon wheelset - 12-speed Shimano XTR components - ENVE M5 carbon handlebar - ENVE carbon seatpost - Shimano Deore XTR hydraulic disc brakes
Cannondale Scalpel Si Hi-Mod World Cup
$11,000.00
An exciting, exacting XC racing bike designed to conquer the aggressive terrain of modern World Cup courses. - BallisTec Hi-Mod carbon frame - Lefty Ocho Carbon 100mm-travel suspension fork - Fox Float Factory DPS EVOL rear shock - ENVE M525 Carbon wheelset - 12-speed SRAM XX1 AXS components - ENVE M5 carbon handlebar - ENVE carbon seatpost - SRAM Level Ultimate hydraulic disc brakes
Cannondale Scalpel-Si Hi-Mod World Cup
$6,999.00 $10,500.00 33% Off
Kill on the ups and thrill on the downs with the class-dominating weight and stiffness, mountain goat traction, and insanely confident handling of the world's best XC race machine—Cannondale's Scalpel-Si. Welcome to XXC. OutFront Steering Geometry gives you the best of both worlds: slack and stable on hectic descents, yet quick and nimble everywhere else. Unbelievably rigid and precise, Lefty out-corners, out-handles and flat-out rides circles around its flexy XC competition. Its custom extra-long fork offsets (rake) makes Cannondale's OutFront Steering Geometry possible. Proprietary Ai offset drivetrain delivers super short chainstays for climb-winning traction and agile handling, without sacrificing mud/tire clearance or limiting you to single ring set-ups.
Yeti Cycles SB100 C-Series C1
Last we checked, "XC-style" racing on a mountain bike doesn't stop once you crest the climb. Crushing souls on the descent is more than half the fun. And a hell of a lot more than half the point. For racers who want to fly down as much as soar up, the SB100 is the bike we've always wanted to make. - The Switch Infinity was re-designed for 100mm of travel, it's lighter and tucks neatly behind the seat tube. Pretty rad. - The new frame designs accommodate a water bottle mount in the front triangle and allow space for longer dropper seat posts. - SB100 features genre-killing geometry, inspired by going fast downhill but balanced to provide uphill efficiency. - An integrated headset allows for a lower overall stack height and cleaner carbon layup. - Internally tunneled cable routing allows for clean lines and a quiet, rattle-free ride. - Switch Infinity utilizes a patented translating pivot that switches direction as the bike moves through its travel. - Our linear system built by FOX is able to achieve infinite tunability and durability, which cannot be matched by traditional link designs. - Better "decoupling" of the chain forces allows the suspension to work more efficiently to absorb impacts. - The ability to manipulate the leverage ratio without affecting the anti-squat characteristics is unique to Switch Infinity suspension. - C-Series frames utilize small changes to the carbon fiber layup to offer a more aggressively priced carbon frame. Build Highlights - C/Series carbon fiber frame - Fox Performance 34 fork - Fox Performance DPS rear shock - SRAM GX Eagle drivetrain - SRAM Guide R hydraulic disc brakes - DT Swiss M1900 wheels - Fox Transfer dropper post SRAM AXS and carbon wheelset options available. Contact your local Yeti dealer for details.
Yeti Cycles SB100 C-Series C2
Last we checked, "XC-style" racing on a mountain bike doesn't stop once you crest the climb. Crushing souls on the descent is more than half the fun. And a hell of a lot more than half the point. For racers who want to fly down as much as soar up, the SB100 is the bike we've always wanted to make. - The Switch Infinity was re-designed for 100mm of travel, it's lighter and tucks neatly behind the seat tube. Pretty rad. - The new frame designs accommodate a water bottle mount in the front triangle and allow space for longer dropper seat posts. - SB100 features genre-killing geometry, inspired by going fast downhill but balanced to provide uphill efficiency. - An integrated headset allows for a lower overall stack height and cleaner carbon layup. - Internally tunneled cable routing allows for clean lines and a quiet, rattle-free ride. - Switch Infinity utilizes a patented translating pivot that switches direction as the bike moves through its travel. - Our linear system built by FOX is able to achieve infinite tunability and durability, which cannot be matched by traditional link designs. - Better "decoupling" of the chain forces allows the suspension to work more efficiently to absorb impacts. - The ability to manipulate the leverage ratio without affecting the anti-squat characteristics is unique to Switch Infinity suspension. - C-Series frames utilize small changes to the carbon fiber layup to offer a more aggressively priced carbon frame. Build Highlights - C/Series carbon fiber frame - Fox Performance 34 fork - Fox Performance DPS rear shock - SRAM GX/X01 drivetrain - SRAM Level TLM hydraulic disc brakes - DT Swiss M1700 wheels - Fox Transfer dropper post SRAM AXS and carbon wheelset options available. Contact your local Yeti dealer for details.
Yeti Cycles SB100 T-Series T1
Last we checked, "XC-style" racing on a mountain bike doesn't stop once you crest the climb. Crushing souls on the descent is more than half the fun. And a hell of a lot more than half the point. For racers who want to fly down as much as soar up, the SB100 is the bike we've always wanted to make. - The Switch Infinity was re-designed for 100mm of travel, it's lighter and tucks neatly behind the seat tube. Pretty rad. - The new frame designs accommodate a water bottle mount in the front triangle and allow space for longer dropper seat posts. - SB100 features genre-killing geometry, inspired by going fast downhill but balanced to provide uphill efficiency. - An integrated headset allows for a lower overall stack height and cleaner carbon layup. - Internally tunneled cable routing allows for clean lines and a quiet, rattle-free ride. - Switch Infinity utilizes a patented translating pivot that switches direction as the bike moves through its travel. - Our linear system built by FOX is able to achieve infinite tunability and durability, which cannot be matched by traditional link designs. - Better "decoupling" of the chain forces allows the suspension to work more efficiently to absorb impacts. - The ability to manipulate the leverage ratio without affecting the anti-squat characteristics is unique to Switch Infinity suspension. - TURQ Series bikes are made with the highest quality carbon fiber available and offer the perfect balance of stiffness and compliance. Build Highlights - TURQ Series carbon fiber frame - Fox Factory 34 fork - Fox Factory DPS rear shock - Shimano XT drivetrain - Shimano XT 2-piston hydraulic disc brakes - DT Swiss M1700 wheels - Fox Transfer dropper post SRAM AXS and carbon wheelset options available. Contact your local Yeti dealer for details.
Yeti Cycles SB100 T-Series T2
Last we checked, "XC-style" racing on a mountain bike doesn't stop once you crest the climb. Crushing souls on the descent is more than half the fun. And a hell of a lot more than half the point. For racers who want to fly down as much as soar up, the SB100 is the bike we've always wanted to make. - The Switch Infinity was re-designed for 100mm of travel, it's lighter and tucks neatly behind the seat tube. Pretty rad. - The new frame designs accommodate a water bottle mount in the front triangle and allow space for longer dropper seat posts. - SB100 features genre-killing geometry, inspired by going fast downhill but balanced to provide uphill efficiency. - An integrated headset allows for a lower overall stack height and cleaner carbon layup. - Internally tunneled cable routing allows for clean lines and a quiet, rattle-free ride. - Switch Infinity utilizes a patented translating pivot that switches direction as the bike moves through its travel. - Our linear system built by FOX is able to achieve infinite tunability and durability, which cannot be matched by traditional link designs. - Better "decoupling" of the chain forces allows the suspension to work more efficiently to absorb impacts. - The ability to manipulate the leverage ratio without affecting the anti-squat characteristics is unique to Switch Infinity suspension. - TURQ Series bikes are made with the highest quality carbon fiber available and offer the perfect balance of stiffness and compliance. Build Highlights - TURQ Series carbon fiber frame - Fox Factory 34 fork - Fox Factory DPS rear shock - SRAM X01 drivetrain - SRAM Level TLM hydraulic disc brakes - DT Swiss M1700 wheels - Fox Transfer dropper post SRAM AXS and carbon wheelset options available. Contact your local Yeti dealer for details.
Yeti Cycles SB100 T-Series T3
Last we checked, "XC-style" racing on a mountain bike doesn't stop once you crest the climb. Crushing souls on the descent is more than half the fun. And a hell of a lot more than half the point. For racers who want to fly down as much as soar up, the SB100 is the bike we've always wanted to make. - The Switch Infinity was re-designed for 100mm of travel, it's lighter and tucks neatly behind the seat tube. Pretty rad. - The new frame designs accommodate a water bottle mount in the front triangle and allow space for longer dropper seat posts. - SB100 features genre-killing geometry, inspired by going fast downhill but balanced to provide uphill efficiency. - An integrated headset allows for a lower overall stack height and cleaner carbon layup. - Internally tunneled cable routing allows for clean lines and a quiet, rattle-free ride. - Switch Infinity utilizes a patented translating pivot that switches direction as the bike moves through its travel. - Our linear system built by FOX is able to achieve infinite tunability and durability, which cannot be matched by traditional link designs. - Better "decoupling" of the chain forces allows the suspension to work more efficiently to absorb impacts. - The ability to manipulate the leverage ratio without affecting the anti-squat characteristics is unique to Switch Infinity suspension. - TURQ Series bikes are made with the highest quality carbon fiber available and offer the perfect balance of stiffness and compliance. Build Highlights - TURQ Series carbon fiber frame - Fox Factory 34 fork - Fox Factory DPS rear shock - SRAM XX1 Eagle drivetrain - SRAM Level TLM hydraulic disc brakes - DT Swiss M1700 wheels - Fox Transfer Factory dropper post SRAM AXS and carbon wheelset options available. Contact your local Yeti dealer for details.
Yeti Cycles SB130 C-Series C1
The Rebel Yell of the middle child. Fed a steady diet of super-tech climbs, the SB130 was built to crush the biggest terrain. No trail is "too" anything. Point it up or down. Enter a last-minute enduro just for the fun of it. We like to say no one bike can rule it all. But the SB130? It's one bike that rules. - At the heart of the SB130 suspension design is our patented Switch Infinity suspension system. - The SB130 is built to tackle any type of terrain. From buffed out singletrack, to rugged EWS racecourses, it can hold its own on a huck. - The SB130 has progressive trail-inspired geometry. We took what we learned from the SB5 and our Factory team riders and incorporated it here. - A patent-pending wishbone shock extender was developed to change the leverage ratio and shock clearance. - No more gunk on your water bottle mouthpiece, as the mount is now inside the front triangle. - An integrated headset allows for a lower overall stack height and cleaner carbon layup. - Internally tunneled routing allows for clean lines, ease of maintenance, and less shifting of housing during suspension movement. - Switch Infinity utilizes a patented translating pivot that switches direction as the bike moves through its travel. - Our linear system built by FOX is able to achieve infinite tunability and durability, which cannot be matched by traditional link designs. - Decoupling of the chain forces allows the suspension to work more efficiently to absorb impacts. - The ability to manipulate the leverage ratio without affecting the anti-squat characteristics is unique to Switch Infinity suspension. - C-Series frames utilize small changes to the carbon fiber layup to offer a more aggressively priced carbon frame. Build Highlights - C/Series carbon fiber frame - FOX Performance 36 fork - FOX Performance DPX2 rear shock - SRAM GX Eagle drivetrain - SRAM Guide R brakes - DT Swiss M1900 wheels - FOX Transfer dropper post SRAM AXS and carbon wheelset options available. Contact your local Yeti dealer for details.
Yeti Cycles SB130 C-Series C2
The Rebel Yell of the middle child. Fed a steady diet of super-tech climbs, the SB130 was built to crush the biggest terrain. No trail is "too" anything. Point it up or down. Enter a last-minute enduro just for the fun of it. We like to say no one bike can rule it all. But the SB130? It's one bike that rules. - At the heart of the SB130 suspension design is our patented Switch Infinity suspension system. - The SB130 is built to tackle any type of terrain. From buffed out singletrack, to rugged EWS racecourses, it can hold its own on a huck. - The SB130 has progressive trail-inspired geometry. We took what we learned from the SB5 and our Factory team riders and incorporated it here. - A patent-pending wishbone shock extender was developed to change the leverage ratio and shock clearance. - No more gunk on your water bottle mouthpiece, as the mount is now inside the front triangle. - An integrated headset allows for a lower overall stack height and cleaner carbon layup. - Internally tunneled routing allows for clean lines, ease of maintenance, and less shifting of housing during suspension movement. - Switch Infinity utilizes a patented translating pivot that switches direction as the bike moves through its travel. - Our linear system built by FOX is able to achieve infinite tunability and durability, which cannot be matched by traditional link designs. - Decoupling of the chain forces allows the suspension to work more efficiently to absorb impacts. - The ability to manipulate the leverage ratio without affecting the anti-squat characteristics is unique to Switch Infinity suspension. - C-Series frames utilize small changes to the carbon fiber layup to offer a more aggressively priced carbon frame. Build Highlights - C/Series carbon fiber frame - FOX Performance 36 fork - FOX Performance DPX2 rear shock - SRAM GX/X01 Eagle drivetrain - SRAM G2 RSC brakes - DT Swiss M1700 wheels - FOX Transfer dropper post SRAM AXS and carbon wheelset options available. Contact your local Yeti dealer for details.
Yeti Cycles SB130 C-Series CLR
The Rebel Yell of the middle child. Fed a steady diet of super-tech climbs, the SB130 was built to crush the biggest terrain. No trail is "too" anything. Point it up or down. Enter a last-minute enduro just for the fun of it. We like to say no one bike can rule it all. But the SB130? It's one bike that rules. - At the heart of the SB130 suspension design is our patented Switch Infinity suspension system. - The SB130 is built to tackle any type of terrain. From buffed out singletrack, to rugged EWS racecourses, it can hold its own on a huck. - The SB130 has progressive trail-inspired geometry. We took what we learned from the SB5 and our Factory team riders and incorporated it here. - A patent-pending wishbone shock extender was developed to change the leverage ratio and shock clearance. - No more gunk on your water bottle mouthpiece, as the mount is now inside the front triangle. - An integrated headset allows for a lower overall stack height and cleaner carbon layup. - Internally tunneled routing allows for clean lines, ease of maintenance, and less shifting of housing during suspension movement. - Switch Infinity utilizes a patented translating pivot that switches direction as the bike moves through its travel. - Our linear system built by FOX is able to achieve infinite tunability and durability, which cannot be matched by traditional link designs. - Decoupling of the chain forces allows the suspension to work more efficiently to absorb impacts. - The ability to manipulate the leverage ratio without affecting the anti-squat characteristics is unique to Switch Infinity suspension. - C-Series frames utilize small changes to the carbon fiber layup to offer a more aggressively priced carbon frame. Build Highlights - C/Series carbon fiber frame - FOX Performance 36 fork - FOX Performance DPX2 rear shock - SRAM GX Eagle drivetrain - SRAM Code R brakes - DT Swiss E1900 wheels - FOX Transfer dropper post SRAM AXS and carbon wheelset options available. Contact your local Yeti dealer for details.
Yeti Cycles SB130 T-Series T1
The Rebel Yell of the middle child. Fed a steady diet of super-tech climbs, the SB130 was built to crush the biggest terrain. No trail is "too" anything. Point it up or down. Enter a last-minute enduro just for the fun of it. We like to say no one bike can rule it all. But the SB130? It's one bike that rules. - At the heart of the SB130 suspension design is our patented Switch Infinity suspension system. - The SB130 is built to tackle any type of terrain. From buffed out singletrack, to rugged EWS racecourses, it can hold its own on a huck. - The SB130 has progressive trail-inspired geometry. We took what we learned from the SB5 and our Factory team riders and incorporated it here. - A patent-pending wishbone shock extender was developed to change the leverage ratio and shock clearance. - No more gunk on your water bottle mouthpiece, as the mount is now inside the front triangle. - An integrated headset allows for a lower overall stack height and cleaner carbon layup. - Internally tunneled routing allows for clean lines, ease of maintenance, and less shifting of housing during suspension movement. - Switch Infinity utilizes a patented translating pivot that switches direction as the bike moves through its travel. - Our linear system built by FOX is able to achieve infinite tunability and durability, which cannot be matched by traditional link designs. - Decoupling of the chain forces allows the suspension to work more efficiently to absorb impacts. - The ability to manipulate the leverage ratio without affecting the anti-squat characteristics is unique to Switch Infinity suspension. - C-Series frames utilize small changes to the carbon fiber layup to offer a more aggressively priced carbon frame. Build Highlights - TURQ Series carbon fiber frame - FOX Factory Fit 4 36 fork - FOX Factory DPX2 rear shock - Shimano XT drivetrain - Shimano XT 4-Piston brakes - DT Swiss M1700 wheels - FOX Transfer dropper post SRAM AXS and carbon wheelset options available. Contact your local Yeti dealer for details.
Yeti Cycles SB130 T-Series T2
The Rebel Yell of the middle child. Fed a steady diet of super-tech climbs, the SB130 was built to crush the biggest terrain. No trail is "too" anything. Point it up or down. Enter a last-minute enduro just for the fun of it. We like to say no one bike can rule it all. But the SB130? It's one bike that rules. - At the heart of the SB130 suspension design is our patented Switch Infinity suspension system. - The SB130 is built to tackle any type of terrain. From buffed out singletrack, to rugged EWS racecourses, it can hold its own on a huck. - The SB130 has progressive trail-inspired geometry. We took what we learned from the SB5 and our Factory team riders and incorporated it here. - A patent-pending wishbone shock extender was developed to change the leverage ratio and shock clearance. - No more gunk on your water bottle mouthpiece, as the mount is now inside the front triangle. - An integrated headset allows for a lower overall stack height and cleaner carbon layup. - Internally tunneled routing allows for clean lines, ease of maintenance, and less shifting of housing during suspension movement. - Switch Infinity utilizes a patented translating pivot that switches direction as the bike moves through its travel. - Our linear system built by FOX is able to achieve infinite tunability and durability, which cannot be matched by traditional link designs. - Decoupling of the chain forces allows the suspension to work more efficiently to absorb impacts. - The ability to manipulate the leverage ratio without affecting the anti-squat characteristics is unique to Switch Infinity suspension. - C-Series frames utilize small changes to the carbon fiber layup to offer a more aggressively priced carbon frame. Build Highlights - TURQ Series carbon fiber frame - FOX Factory Fit 4 36 fork - FOX Factory DPX2 rear shock - SRAM X01 Eagle drivetrain - SRAM G2 RSC brakes - DT Swiss M1700 wheels - FOX Transfer dropper post SRAM AXS and carbon wheelset options available. Contact your local Yeti dealer for details.
Yeti Cycles SB130 T-Series T3
The Rebel Yell of the middle child. Fed a steady diet of super-tech climbs, the SB130 was built to crush the biggest terrain. No trail is "too" anything. Point it up or down. Enter a last-minute enduro just for the fun of it. We like to say no one bike can rule it all. But the SB130? It's one bike that rules. - At the heart of the SB130 suspension design is our patented Switch Infinity suspension system. - The SB130 is built to tackle any type of terrain. From buffed out singletrack, to rugged EWS racecourses, it can hold its own on a huck. - The SB130 has progressive trail-inspired geometry. We took what we learned from the SB5 and our Factory team riders and incorporated it here. - A patent-pending wishbone shock extender was developed to change the leverage ratio and shock clearance. - No more gunk on your water bottle mouthpiece, as the mount is now inside the front triangle. - An integrated headset allows for a lower overall stack height and cleaner carbon layup. - Internally tunneled routing allows for clean lines, ease of maintenance, and less shifting of housing during suspension movement. - Switch Infinity utilizes a patented translating pivot that switches direction as the bike moves through its travel. - Our linear system built by FOX is able to achieve infinite tunability and durability, which cannot be matched by traditional link designs. - Decoupling of the chain forces allows the suspension to work more efficiently to absorb impacts. - The ability to manipulate the leverage ratio without affecting the anti-squat characteristics is unique to Switch Infinity suspension. - C-Series frames utilize small changes to the carbon fiber layup to offer a more aggressively priced carbon frame. Build Highlights - TURQ Series carbon fiber frame - FOX Factory Fit 4 36 fork - FOX Factory DPX2 rear shock - SRAM XX1 Eagle drivetrain - SRAM G2 RSC brakes - DT Swiss M1700 wheels - FOX Transfer Factory dropper post SRAM AXS and carbon wheelset options available. Contact your local Yeti dealer for details.
Yeti Cycles SB130 T-Series TLR
The Rebel Yell of the middle child. Fed a steady diet of super-tech climbs, the SB130 was built to crush the biggest terrain. No trail is "too" anything. Point it up or down. Enter a last-minute enduro just for the fun of it. We like to say no one bike can rule it all. But the SB130? It's one bike that rules. - At the heart of the SB130 suspension design is our patented Switch Infinity suspension system. - The SB130 is built to tackle any type of terrain. From buffed out singletrack, to rugged EWS racecourses, it can hold its own on a huck. - The SB130 has progressive trail-inspired geometry. We took what we learned from the SB5 and our Factory team riders and incorporated it here. - A patent-pending wishbone shock extender was developed to change the leverage ratio and shock clearance. - No more gunk on your water bottle mouthpiece, as the mount is now inside the front triangle. - An integrated headset allows for a lower overall stack height and cleaner carbon layup. - Internally tunneled routing allows for clean lines, ease of maintenance, and less shifting of housing during suspension movement. - Switch Infinity utilizes a patented translating pivot that switches direction as the bike moves through its travel. - Our linear system built by FOX is able to achieve infinite tunability and durability, which cannot be matched by traditional link designs. - Decoupling of the chain forces allows the suspension to work more efficiently to absorb impacts. - The ability to manipulate the leverage ratio without affecting the anti-squat characteristics is unique to Switch Infinity suspension. - C-Series frames utilize small changes to the carbon fiber layup to offer a more aggressively priced carbon frame. Build Highlights - TURQ Series carbon fiber frame - FOX Factory Grip 2 36 fork - FOX Factory DPX2 rear shock - SRAM X01 Eagle drivetrain - SRAM Code RSC brakes - DT Swiss Custom EX1700 wheels - FOX Transfer dropper post SRAM AXS and carbon wheelset options available. Contact your local Yeti dealer for details.
Yeti Cycles SB140 C-Series C1
Some say the SB140 never met a dirt it didn't like. We agree in spades. What's your pleasure? Drag a bar. Make an edit. Stay out after dark. Try it. Land it. Or just stay at it. Happy to pedal, greedy for more—the SB140 is down for fun. - At the heart of the SB140 suspension design is our patented Switch Infinity suspension system. - We've tuned the SB140 for maximum fun on the trail or at the park. - The SB140 is designed to help you get the wheels off the ground. - An integrated headset allows for a lower overall stack height and cleaner carbon layup. - No more gunk on your water bottle mouthpiece, as the mount is now inside the front triangle. - Internally tunneled cable routing allows for clean lines and a quiet, rattle-free ride. - Switch Infinity utilizes a patented translating pivot that switches direction as the bike moves through its travel. - Our linear system built by FOX is able to achieve infinite tunability and durability, which cannot be matched by traditional link designs. - Better decoupling of the chain forces allows the suspension to work more efficiently to absorb impacts. - The ability to manipulate the leverage ratio without affecting the anti-squat characteristics is unique to Switch Infinity suspension. - C-Series utilizes small changes to the carbon fiber layup, enabling us to make a more aggressively priced carbon frame. Build Highlights - C/Series carbon fiber frame - FOX Performance 36 fork - FOX Performance DPX2 rear shock - SRAM GX Eagle drivetrain - SRAM Guide R brakes - DT Swiss M1900 wheels - FOX Transfer dropper post SRAM AXS and carbon wheelset options available. Contact your local Yeti dealer for details.
Yeti Cycles SB140 C-Series C2
Some say the SB140 never met a dirt it didn't like. We agree in spades. What's your pleasure? Drag a bar. Make an edit. Stay out after dark. Try it. Land it. Or just stay at it. Happy to pedal, greedy for more—the SB140 is down for fun. - At the heart of the SB140 suspension design is our patented Switch Infinity suspension system. - We've tuned the SB140 for maximum fun on the trail or at the park. - The SB140 is designed to help you get the wheels off the ground. - An integrated headset allows for a lower overall stack height and cleaner carbon layup. - No more gunk on your water bottle mouthpiece, as the mount is now inside the front triangle. - Internally tunneled cable routing allows for clean lines and a quiet, rattle-free ride. - Switch Infinity utilizes a patented translating pivot that switches direction as the bike moves through its travel. - Our linear system built by FOX is able to achieve infinite tunability and durability, which cannot be matched by traditional link designs. - Better decoupling of the chain forces allows the suspension to work more efficiently to absorb impacts. - The ability to manipulate the leverage ratio without affecting the anti-squat characteristics is unique to Switch Infinity suspension. - C-Series utilizes small changes to the carbon fiber layup, enabling us to make a more aggressively priced carbon frame. Build Highlights - C/Series carbon fiber frame - FOX Performance 36 fork - FOX Performance DPX2 rear shock - SRAM GX/X01 Eagle drivetrain - SRAM G2 RSC brakes - DT Swiss M1700 wheels - FOX Transfer dropper post SRAM AXS and carbon wheelset options available. Contact your local Yeti dealer for details.
Yeti Cycles SB140 T-Series T1
Some say the SB140 never met a dirt it didn't like. We agree in spades. What's your pleasure? Drag a bar. Make an edit. Stay out after dark. Try it. Land it. Or just stay at it. Happy to pedal, greedy for more—the SB140 is down for fun. - At the heart of the SB140 suspension design is our patented Switch Infinity suspension system. - We've tuned the SB140 for maximum fun on the trail or at the park. - The SB140 is designed to help you get the wheels off the ground. - An integrated headset allows for a lower overall stack height and cleaner carbon layup. - No more gunk on your water bottle mouthpiece, as the mount is now inside the front triangle. - Internally tunneled cable routing allows for clean lines and a quiet, rattle-free ride. - Switch Infinity utilizes a patented translating pivot that switches direction as the bike moves through its travel. - Our linear system built by FOX is able to achieve infinite tunability and durability, which cannot be matched by traditional link designs. - Better decoupling of the chain forces allows the suspension to work more efficiently to absorb impacts. - The ability to manipulate the leverage ratio without affecting the anti-squat characteristics is unique to Switch Infinity suspension. - TURQ Series bikes are made with the highest quality carbon fiber available and offer the perfect balance of stiffness and compliance. Build Highlights - TURQ Series carbon fiber frame - FOX Factory Grip 2 36 fork - FOX Factory DPX2 rear shock - Shimano XT drivetrain - Shimano XT 4-Piston brakes - DT Swiss M1700 wheels - FOX Transfer dropper post SRAM AXS and carbon wheelset options available. Contact your local Yeti dealer for details.
Yeti Cycles SB140 T-Series T2
Some say the SB140 never met a dirt it didn't like. We agree in spades. What's your pleasure? Drag a bar. Make an edit. Stay out after dark. Try it. Land it. Or just stay at it. Happy to pedal, greedy for more—the SB140 is down for fun. - At the heart of the SB140 suspension design is our patented Switch Infinity suspension system. - We've tuned the SB140 for maximum fun on the trail or at the park. - The SB140 is designed to help you get the wheels off the ground. - An integrated headset allows for a lower overall stack height and cleaner carbon layup. - No more gunk on your water bottle mouthpiece, as the mount is now inside the front triangle. - Internally tunneled cable routing allows for clean lines and a quiet, rattle-free ride. - Switch Infinity utilizes a patented translating pivot that switches direction as the bike moves through its travel. - Our linear system built by FOX is able to achieve infinite tunability and durability, which cannot be matched by traditional link designs. - Better decoupling of the chain forces allows the suspension to work more efficiently to absorb impacts. - The ability to manipulate the leverage ratio without affecting the anti-squat characteristics is unique to Switch Infinity suspension. - TURQ Series bikes are made with the highest quality carbon fiber available and offer the perfect balance of stiffness and compliance. Build Highlights - TURQ Series carbon fiber frame - FOX Factory Grip 2 36 fork - FOX Factory DPX2 rear shock - SRAM X01 Eagle drivetrain - SRAM G2 RSC brakes - DT Swiss M1700 wheels - FOX Transfer dropper post SRAM AXS and carbon wheelset options available. Contact your local Yeti dealer for details.
Yeti Cycles SB140 T-Series T3
Some say the SB140 never met a dirt it didn't like. We agree in spades. What's your pleasure? Drag a bar. Make an edit. Stay out after dark. Try it. Land it. Or just stay at it. Happy to pedal, greedy for more—the SB140 is down for fun. - At the heart of the SB140 suspension design is our patented Switch Infinity suspension system. - We've tuned the SB140 for maximum fun on the trail or at the park. - The SB140 is designed to help you get the wheels off the ground. - An integrated headset allows for a lower overall stack height and cleaner carbon layup. - No more gunk on your water bottle mouthpiece, as the mount is now inside the front triangle. - Internally tunneled cable routing allows for clean lines and a quiet, rattle-free ride. - Switch Infinity utilizes a patented translating pivot that switches direction as the bike moves through its travel. - Our linear system built by FOX is able to achieve infinite tunability and durability, which cannot be matched by traditional link designs. - Better decoupling of the chain forces allows the suspension to work more efficiently to absorb impacts. - The ability to manipulate the leverage ratio without affecting the anti-squat characteristics is unique to Switch Infinity suspension. - TURQ Series bikes are made with the highest quality carbon fiber available and offer the perfect balance of stiffness and compliance. Build Highlights - TURQ Series carbon fiber frame - FOX Factory Grip 2 36 fork - FOX Factory DPX2 rear shock - SRAM XX1 Eagle drivetrain - SRAM G2 RSC brakes - DT Swiss M1700 wheels - FOX Transfer Factory dropper post SRAM AXS and carbon wheelset options available. Contact your local Yeti dealer for details.
Yeti Cycles SB150 C-Series C1
"Race bred." It's not just a slogan printed on the SB150's top tube. We've been pinning on numbers and pinning the throttle since 1985. So when choices had to be made on the SB150, every single one was made in the name of unbridled speed. It represents the ultimate example of breeding a bike to beat the clock. - At the heart of the SB150 suspension design is our patented Switch Infinity suspension system. - Tuned to perform on the most grueling enduro tracks in the world. - Built Richie "F-ing" Rude tough, this frame meets Yeti DH testing standards. - The SB150 has progressive, enduro-inspired geometry. We took what we learned from our EWS team riders and made it low, slack, and long. - A patent-pending wishbone shock extender was developed to change the leverage ratio and shock clearance. - The water bottle fits comfortably inside the front triangle, where you might be used to looking for it. - Internally tunneled cable routing allows for clean lines and a quiet, rattle-free ride. - C-Series models feature small changes to the carbon fiber layup, enabling us to make a more aggressively priced carbon frame. Build Highlights - C/Series carbon fiber frame - FOX Performance 36 fork - FOX Performance X2 rear shock - SRAM GX Eagle drivetrain - SRAM Code R brakes - DT Swiss E1900 wheels - FOX Transfer dropper post SRAM AXS and carbon wheelset options available. Contact your local Yeti dealer for details.
Yeti Cycles SB150 C-Series C2
"Race bred." It's not just a slogan printed on the SB150's top tube. We've been pinning on numbers and pinning the throttle since 1985. So when choices had to be made on the SB150, every single one was made in the name of unbridled speed. It represents the ultimate example of breeding a bike to beat the clock. - At the heart of the SB150 suspension design is our patented Switch Infinity suspension system. - Tuned to perform on the most grueling enduro tracks in the world. - Built Richie "F-ing" Rude tough, this frame meets Yeti DH testing standards. - The SB150 has progressive, enduro-inspired geometry. We took what we learned from our EWS team riders and made it low, slack, and long. - A patent-pending wishbone shock extender was developed to change the leverage ratio and shock clearance. - The water bottle fits comfortably inside the front triangle, where you might be used to looking for it. - Internally tunneled cable routing allows for clean lines and a quiet, rattle-free ride. - C-Series models feature small changes to the carbon fiber layup, enabling us to make a more aggressively priced carbon frame. Build Highlights - C/Series carbon fiber frame - FOX Performance 36 fork - FOX Performance X2 rear shock - SRAM GX/X01 Eagle drivetrain - SRAM Code R brakes - DT Swiss Custom EX1700 wheels - FOX Transfer dropper post SRAM AXS and carbon wheelset options available. Contact your local Yeti dealer for details.
Yeti Cycles SB150 T-Series T1
"Race bred." It's not just a slogan printed on the SB150's top tube. We've been pinning on numbers and pinning the throttle since 1985. So when choices had to be made on the SB150, every single one was made in the name of unbridled speed. It represents the ultimate example of breeding a bike to beat the clock. - At the heart of the SB150 suspension design is our patented Switch Infinity suspension system. - Tuned to perform on the most grueling enduro tracks in the world. - Built Richie "F-ing" Rude tough, this frame meets Yeti DH testing standards. - The SB150 has progressive, enduro-inspired geometry. We took what we learned from our EWS team riders and made it low, slack, and long. - A patent-pending wishbone shock extender was developed to change the leverage ratio and shock clearance. - The water bottle fits comfortably inside the front triangle, where you might be used to looking for it. - Internally tunneled cable routing allows for clean lines and a quiet, rattle-free ride. - TURQ Series bikes are made with the highest quality carbon fiber available and offer the perfect balance of stiffness and compliance. Build Highlights - TURQ Series carbon fiber frame - FOX Factory Grip 2 36 fork - FOX Factory X2 rear shock - Shimano XT drivetrain - Shimano XT 4 Piston brakes - DT Swiss Custom EX1700 wheels - FOX Transfer dropper post SRAM AXS and carbon wheelset options available. Contact your local Yeti dealer for details.