Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Car Racks

Yakima Q Clip
$50.00
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
Yakima Q-Towers (4-pack)
$209.00
Yakima's Q-Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The Q-Towers automatically adjust to fit your vehicle's roof contours and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.
Yakima Q-Towers (pair)
$119.00
Yakima's Q-Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The Q-Towers automatically adjust to fit your vehicle's roof contours and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.
Yakima Raptor Aero
$175.00
No matter where you go, Yakima's Raptor Aero keeps your bike securely in place. It's especially convenient because no bike disassembly is required. You'll love this if you have bolt-on or hard-to-remove wheels. Plus, the Raptor's padded jaws hold most bicycles tight yet won't scratch the paint. The Raptor comes with two ratcheting wheel straps and fits most crossbars right out of the box.
Yakima RidgeBack 2
$289.00
Yakima's RidgeBack 2 securely transports two bikes with Yakima's cradles and their simple-to-adjust, ratcheting ZipStrips. Constructed of lightweight aluminum, this innovative hitch rack comes fully assembled out of the box for ease of use. Just plug it into the hitch, tighten and lock the SpeedKnob, and you're ready to load up the bikes! In addition to carrying traditional double-diamond frames with zero bike-to-bike contact, the anti-sway cradles are specially shaped to be compatible with non-standard and full-suspension frames. Plus, the Upperhand control lever allows the rack to fold down, away from back of your vehicle, for unimpeded trunk/hatch access, or when not in use, lets the RidgeBack fold flat for storage.
Yakima RidgeBack 4
$319.00
Yakima's RidgeBack 4 securely transports four bikes with Yakima's cradles and their simple-to-adjust, ratcheting ZipStrips. Constructed of lightweight aluminum, this innovative hitch rack comes fully assembled out of the box for ease of use. Just plug it into the hitch, tighten and lock the SpeedKnob, and you're ready to load up the bikes! In addition to carrying traditional double-diamond frames with zero bike-to-bike contact, the anti-sway cradles are specially shaped to be compatible with non-standard and full-suspension frames. Plus, the Upperhand control lever allows the rack to fold down, away from back of your vehicle, for unimpeded trunk/hatch access, or when not in use, lets the RidgeBack fold flat for storage.
Yakima RidgeBack 5
$349.00
Yakima's RidgeBack 5 securely transports five bikes with Yakima's cradles and their simple-to-adjust, ratcheting ZipStrips. Constructed of lightweight aluminum, this innovative hitch rack comes fully assembled out of the box for ease of use. Just plug it into the hitch, tighten and lock the SpeedKnob, and you're ready to load up the bikes! In addition to carrying traditional double-diamond frames with zero bike-to-bike contact, the anti-sway cradles are specially shaped to be compatible with non-standard and full-suspension frames. Plus, the Upperhand control lever allows the rack to fold down, away from back of your vehicle, for unimpeded trunk/hatch access, or when not in use, lets the RidgeBack fold flat for storage.
Yakima RidgeClip
$126.00
Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system
Yakima RidgeLine Towers
$225.00
Take sleek to a new level – the ingenious RidgeLine Towers integrate with flush-mount factory side rails so you can build a real rack that carries more. Strong and versatile, they attach easily and have a sleek design that aligns with your vehicle’s aerodynamic attitude. - Attaches a base rack system to vehicles with flush-mount factory side rails. RidgeClips and crossbars required for a complete system. - Both are sold separately. Use Fit My Vehicle to find the clips and crossbars. - Advanced design is strong and quiet and aligns with aerodynamic vehicle aesthetics - Works with JetStream, CoreBar and RoundBar crossbars - Unique clip design adapts to your rails for a secure, accurate fit - BarBed has 12° of pitch adjustment to optimize tower position and level bars - Super-simple installation – tool included - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating - Easily locks to you vehicle with our SKS system (sold separately) - RoundBar SL Adapter required to use Yakima's classic RoundBar with - StreamLine System Towers (sold separately) - Streamline crossbars are compatible with any StreamLine Tower StreamLine Tower TECHNICAL SPECS - Weight: 1.25 lbs - Dimensions: L 5.00” x W 5.25” x H 3.50”
Yakima Roundbar SL Adapter
$30.00
Bar adapter that allows you to run RoundBar on StreamLine Towers.
Yakima SKS Accessory Lock Housing
$19.00
Yakima's SKS Accessory Lock Housing is a great way to make sure your bike and luggage mounts stay put. It works with Yakima's SKS lock cores (Same Key System; sold separately) so that you only need to keep track of one key for all your rack-security needs. - Lock rack accessories to your vehicle's crossbar - Use with bike, boat, and BasketCase accessories - SKS Lock Cores sold separately
Yakima SKS Lock Cores (2-Pack)
$40.00
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 2 SKS Cores and matching keys - 2 keys included plus a control key
Yakima SKS Lock Cores (4-Pack)
$60.00
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 4 SKS Cores and matching keys - 2 keys included plus a control key
Yakima SKS Lock Cores (6-Pack)
$80.00
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 6 SKS Cores and matching keys - 2 keys included plus a control key
Yakima Side Loader Brackets
$59.00
Yakima's Side Loader Brackets are permanently side-mounted brackets that fit in the space between the top of your truck and the side window. They allow Yakima 1A Raingutter Towers to be used in some situations where no rain gutters exist (towers sold separately).
Yakima SingleSpeed
$279.00
Light, strong, and always ready to roll, the SingleSpeed hitch rack is built for solo travel. Ready for any kind of bike – road, mountain, fat, or BMX – the StrongArm hook ensures your bike is secure and protected, holding the bike tight by the wheels, and babying those carbon frames and painted surfaces. The locking SpeedKnob makes install a breeze & an integrated SKS bike lock is included to keep your two wheeler secure. - Light, compact, and built for one bike, this hitch rack makes for quick & easy solo travel - Lightweight, hitch mounted tray rack that carries one bike without frame contact - StrongArm hook secures bike at wheels, protecting painted surfaces and carbon frames - Tool-free locking SpeedKnob makes installation and removal fast, easy and secure - Folding wheel cup and compact design keeps the rack out of your way when not in use - Fits most bikes, including fat-tire, mountain, road, hybrid, women’s specific, & BMX - Accommodates disc brakes, through axles, boost hubs, and full suspension bikes - Fits 20” to 29” wheel sizes and tires up to 5-inch wide - Integrated SKS (Same Key System) lock included for added bike security - Fits both 1.25-inch & 2-inch hitch receivers right out of the box
Yakima SkyLine Towers
$225.00
Roll your own way – the SkyLine Towers work with our Landing Pads to create a customizable, mega-versatile, super easy-to-use system that easily handles your unique personality and extensive range of gear. - Complete SkyLine Tower set - Secure and simple – may be the easiest-to-use rack system out there - Fits all styles of Landing Pad (required) - Advanced tower architecture is sleek, strong and quiet - Works with JetStream, CoreBar and RoundBar crossbars - BarBed has 12° of pitch adjustment to optimize tower position and level bars on roofs with curved flush rails - Super-simple installation – tool included - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating\ TECHNICAL SPECS - Weight: 1.00 lbs - Dimensions: L 4.50” x W 4.50” x H 3.00”
Yakima SmarT-Slot Kit 1
$20.00
Take your HighSpeed or HighRoad bike mount to the next level with the SmarT-Slot Kit 1. This hardware kit replaces the standard mounting hardware to enable direct attachment of your bike mount into a T-slot channel on your crossbar. It works with Yakima JetStream crossbars as well as most other T-slot crossbars on the market. PRODUCT DETAILS - Includes T-slot hardware, covers, and install tool. - Designed to work exclusively with Yakima HighSpeed and HighRoad bike mounts. - Compatible with Yakima JetStream bars and most other T-slot style crossbars. TECHNICAL SPECS - Weight: 0.25 lbs
Yakima Smart-Slot Kit 2
$20.00
Go super sleek with this low-profile conversion kit that lets you mount your FatCat or FatCat EVO to T-slotted crossbars, such as Yakima's JetStream bars. PRODUCT DETAILS - Custom-designed for Yakima FatCat and FatCat EVO snowsports mounts - Quick and easy installation - Includes slide in T-bolts and low-profile spacers - Works with our JetStream bars, FlushBar, RailBar, and most other t-slot style crossbars TECHNICAL SPECS - Weight: 0.30 lbs - Dimensions: L 0.75in x W 0.75in x H 2.00in
Yakima SpareRide
$299.00
Make that spare tire work for a living – the SpareRide easily attaches to your rear-mounted spare and turns it into a bike rack. Durable, stable and secure, it installs easily. SuperCush cradles securely hold and protect your bikes, a bottle opener opens bottles, and integrated SKS locks bum out bike thieves. - SuperCush ZipStrip cradles secure the bikes and make loading and unloading a breeze - ZipStrips secure bikes to the rack and are fully removable - Anti-sway cradle design minimizes bike-to-bike contact - Fits nearly any stock size spare - SKS locking package secures bikes to rack to help prevent theft - TireTread pads add stability and protection - Steel construction is strong and durable - Universal mounting plate with extension fits most lug patterns - Locking knob secures rack and sparetire to vehicle - Yakima signature bottle opener lets you enjoy a post-ride cold one - 2-bike capacity TECHNICAL SPECS - Weight: 21.50 lbs - Dimensions: L 40.00” x W 13.00” x H 19.00”
Yakima Sweetroll
$239.00
Loading your boat has never been easier than this! Two front and two rear saddles with integrated rollers will have you and your friends on the water in no time. The spring-loaded base automatically adjusts to boat when loading. - Mounts to any bar type without tools, making installation a cinch. easy loading Fully assembled out of the box - Tool-free installation Fits Yakima round, square, factory and aerodynamic bars Spring-loaded base automatically adjusts to boat when loading - Smooth molded pad hugs and protects multiple boat types - Tilting paddle technology to accommodate an array of boats and roof rack systems - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs - SKS Locks sold separately - Supports one boat up to 80 lbs Minimum crossbar spreads of 24\u001D or more
Yakima Thru-Axle Adapter
$15.00
Thru-axle adapter works with WheelHouse to hold wheels with 12mm/15mm thru-axle. - Easy cam lever for quick installation - Durable stainless steel skewer - Up to 110mm front Hubs TECHNICAL SPECS - Weight: 0.44 lbs - Dimensions: L 9.00” x W 0.75” x H 2.00”
Yakima TimberLine Towers
$225.00
Extend your capacity – the TimberLine attaches to factory racks with raised side rails to expand your carrying capacity and deliver maximum rooftop versatility. Secure and super-sleek, they are quiet, simple to install and work with all of Yakima's bars. - Complete set of TimberLine Towers - The totally new Yakima tower for vehicles with raised side rails. - Advanced tower architecture is sleek, strong and quiet - Works with JetStream, CoreBar and RoundBar crossbars - Strong, durable stainless steel strap to accommodates a range of rails - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating - Easily locks to you vehicle with Yakima's SKS system (sold separately) - RoundBar SL Adapter required to use Yakima's classic RoundBar with - StreamLine System Towers (sold separately) - Streamline crossbars are compatible with any StreamLine Tower StreamLine Tower TECHNICAL SPECS - Weight: 5.00 lbs - Dimensions: L 6.00” x W 3.50” x H 3.00”
Yakima TubeTop
$49.00
Yakima's TubeTop solves the dilemma of how to carry bikes that have frames with non-traditional top tubes, such as certain suspension bikes, women's frames, children's bikes and more. The fully adjustable TubeTop is attached to the bike to act as a frame top tube so the bike will mount on all Yakima rear racks. Plus, the TubeTop's large molded collars are gentle on stems and seatposts.
Yakima TwoTimer
$349.00
Yakima's TwoTimer hauls two bikes of virtually any style, from children's bikes to big DH bikes to fat bikes. • Transport two bikes regardless of frame design, suspension or wheel size • Ideal for fat bikes, kids' bikes, and fenders • Secures bike by the frame with padded arms • Fits 1 ¼" or 2" hitch receiver right out of the box • Low tray height for quick and easy loading and unloading of bikes • Folds down with bikes loaded for rear-of-vehicle access. Folds up when not in use
Yakima Universal Mighty Mounts (4-pack)
$59.00
Yakima's Universal Mighty Mounts are a simple way to install Yakima accessories on your car's factory racks. The universal design fits almost all factory crossbars.
Yakima Universal QR Locking Skewer
$29.00
A straight-forward, easy-to-use, locking QR skewer that fits any fork-style bike mount on the market. Compatible with any 9mm x 100mm axles. - Durable stainless steel axle and body - Easy-to-adjust end nut and cam lever - Lockable with SKS lock, sold separately
Yakima Wide Body Brackets
$59.00
Yakima's Wide Body Brackets are permanently side-mounted brackets for some fiberglass or camper tops with steep sides. They allow Yakima 1A Raingutter Towers to be used in some situations where no rain gutters exist (towers sold separately).
Yakima Windshield
$125.00
A smart fairing that easily attaches to any Yakima bar—and just about anyone else’s—to quiet wind noise and reduce drag. - Moves airflow up and over the rack to reduce drag and quiet wind noise - Band-style attachment quickly and easily attaches to any crossbar - Secures with easy-to-reach adjustments and included tool - Available in 4 sizes; find your fit at yakima.com/fit
Thule AeroBlade Load Bar
$199.95
Thule's AeroBlade Load Bars are the strong, silent type. Using a sophisticated BoxBeam construction, they're some of the strongest load bars on the market with a capacity of up to 165 pounds. That's the strong, now for the silent: In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The bars are easy to use, too, thanks to Thule's SmartSlide sytem that makes installation hassle free and their SwingBlade technology that allows full access to the T-slot for easy accessory additions.
Thule Circuit Fork Mount Carrier
$169.95
The Thule Circuit Fork Mount low-profile carrier is designed for those looking for security, convenience and aerodynamic styling. - AeroHead low-profile reinforced head combines aerodynamics, durability and style - SecureSkewer for fast loading and security w/ Thule’s One-Key lock cylinder (sold separately) - Tool-Free universal mounting makes it simple and easy to install - Integrated wheel cradle high-wall design provides protection and perfect fit beneath your wheel - Low profile aluminum tray made from corrosion-resistant aluminum to withstand the elements - Ratcheting wheel strap quickly secures back wheel to tray - Fits most factory supplied rack systems - Works with 15mm, 20mm and lefty forks with adapter (sold separately)
Thule KIT3142
$119.95
You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet
Saris Bike Beam
$42.99
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
Saris Bones 2-Bike
$159.99
The arch is arguably the most important engineering feat in human history. One look at Saris’ Bones 2-Bike rack would make any ancient Roman proud. With three incredibly strong, arched leg mounts and two arched arms, you can rest assured that your bike is in solid hands. Six highly adjustable straps, each equipped with soft coated hooks, hold the rack down, while the three legs have grippy rubber feet to provide a sturdy base. Ratcheting anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers.
Saris Bones 3-Bike
$184.99
Saris’ Bones 3-Bike rack unites utilitarian strength and modern style. Crafted of incredibly strong, injection-molded plastic, the four arched leg mounts and two arched arms cradle your bikes on different levels to minimize unwanted handlebar and seat contact. Six highly adjustable straps, each equipped with soft, vinyl-coated hooks, hold the rack down, while the four legs have grippy rubber feet to provide a sturdy base that won't harm your vehicle's finish. Ratcheting, soft-touch, anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers. Plus, it folds fast for easy portability and storage.
Saris Bones EX
$229.99
What happens when you take the most popular trunk rack of all time and expand its vehicle compatibility by 20%? Spoiler Alert: you get the Bones EX. Cultivated in the mind of Italian designer Fabio Pedrini and brought to life in our Wisconsin-based facility, the Bones EX features a unique and game-changing leg. Featuring a leg that gracefully avoids contact with most plastic spoilers found on many of the best-selling sedans, hatch backs and SUVs, the Bones EX now fits 20% more vehicles than its legendary predecessor. And that’s not all. We’ve decked out the Bones EX with premium bike hold downs and a handy strap management system in a shade that never goes out of style. Product Features - Best fit around: fits 89% of the top vehicles sold, including those with spoilers. - VIP Treatment: premium bike hold downs that are easy to use and quick to load. - Clean, Sleek Look: integrated strap management eliminates flapping straps. - Strong & Rust-Free: injection-molded arms and legs keep the rack solid for years to come. - Carries 3 bikes (35lb/bike). - Has the largest vehicle compatibility of any trunk rack on the market – consult the Saris Fit Guide for approved fits. - Unique dog leg fits over most spoilers, including those on popular sedans, hatchbacks and SUVs. - Premium bike hold downs that are easy to use and quick to load. - Integrated strap management system provides clean look and eliminates flapping straps. - Best-in-class ratchet straps speedily fasten bike to the rack. - Strongest frame on the market. - Built with 100% recyclable materials. - Rust-free injection molded plastic. - Articulated rubber feet to protect paint. - Arc–based design separates bikes on different levels. - Patents issued and pending. - Lightweight at 11 lbs.
Saris Bones Hitch Mount (2-Bike)
$229.99
- Carries 2 bikes (35 pounds/bike). - Preassembled. - Injection-molded arms are strongest in the market. - Arms fold up and down with ease for quick storage and easy loading. - Welded steel mainframe. - Rack tilts down with pull of handle for easy access to rear of vehicle. - Coated hold-downs and anti-sway straps provide soft-touch protection to secure and stabilize the bikes. - Fits 1-¼-inch or 2-ubcg hitches out of the box. - Hitch lock sold separately (Model 3022). - Lightweight, steel construction weighs only 15 pounds. - Made in Madison, WI.
Saris Bones Hitch Mount (3-Bike)
$259.99
If you’re looking for a car rack that will haul your favorite 2-wheeled possessions with swagger and security, the Bones Hitch 3-bike has you covered. With arching lines and robust, American-made materials this hitch rack can be summarized in two words: beautiful simplicity. Weighing in at only 16 pounds, this 3-bike hitch rack is a full 25% lighter than similar racks—et just as strong. With integrated anti-sways and hold downs, the Bones Hitch is a fully functional piece of art. - Carries 3 bikes (35 pounds/bike). - Preassembled. - Injection-molded arms are strongest in the market. - Arms fold up and down with ease for quick storage and easy loading. - Welded steel mainframe. - Rack tilts down with pull of handle for easy access to rear of vehicle. - Coated hold-downs and anti-sway straps provide soft-touch protection to secure and stabilize the bikes. - Fits 1-¼-inch or 2-inch hitches. - Hitch lock sold separately (Model 3022). - Lightweight, steel construction weighs only 16 pounds. - Made in Madison, WI.
Saris Bones Hitch Mount (4-Bike)
$289.99
The Bones Hitch 4-Bike rack is born out of the design and function of Saris' best-selling Bones rack and brought to life in the form of a hitch rack. You wanted a nicely designed, tilting rack at a great value, and you wanted it to be lightweight. The result is the Bones Hitch. The Bones Hitch is one of the lightest racks in the marketplace yet every bit as strong and durable. That's why Saris backs it—along with all of their racks—with a lifetime warranty. Stylish, lightweight, easy to use and made here in the USA—who says you can't have it all? - Carries 4 bikes, up to 35 pounds each. - Preassembled in box. - Rack tilts down with pull of handle for easy access to rear of vehicle. - Coated hold-downs and anti-sway straps provide soft-touch protection to secure and stabilize the bikes. - Fits 1-¼-inch or 2-inch hitches out of the box. - Lifetime warranty. - Made in Madison, WI. - Injection-molded arms are strongest in the market. - Arms fold up and down with ease for quick storage and easy loading. - Welded steel mainframe. - Hitch lock sold separately (Model 3022). - Lightweight, steel construction weighs only 20 lbs.
Saris Bones RS 3-Bike
$324.99
Saris’ Bones RS 3-Bike rack might as well be welded to your car—it’s that rock solid. Easy to mount and dismount, the rack has two stainless steel belts that are tightened by leveraged ratchet systems. Plus, two lower leg hooks and six grippy rubber feet mean you can set it and forget it. Ratcheting anti-sway straps keep your bikes in place, the arms fold down to keep out of the way, and a locking mechanism secures the rack to your vehicle for peace of mind.
Saris Extra Long S-Hook Straps 80
$11.99
Some vehicles require extra strap length. Compatible with Saris' Bones bike racks, the Saris Extra Long S-Hook Straps 80" are made of strong nylon with coated hooks that protect your car's finish.
Saris Freedom 2-Bike
$299.99
Transport all types of bikes with Saris’ Freedom 2-Bike hitch rack. Its innovative design adjusts to fit most bikes and sizes, including kids’ and even some recumbents, thanks to the adjustability of its center upright support. It uses quick-adjust trays and ratcheting straps to secure two bikes of up to 35 pounds each, and loading is made easy by the low tray height. The center upright support even tilts down to allow trunk access. Plus, the rack itself only weighs 21 pounds, making it easy to take on and off.
Saris Freedom 4-Bike
$579.99
Transport all types of bikes with Saris’ Freedom 4-Bike hitch rack. Its innovative design adjusts to fit most bikes and sizes, including kids’ and even some recumbents, thanks to the adjustability of its center upright supports. It uses quick-adjust trays and ratcheting straps to secure four bikes of up to 35 pounds each, and loading is made easy by the low tray height. The center upright supports even tilt down to allow trunk access.
Saris Freedom EX 2-Bike
$379.99
The Freedom EX can securely carry two bikes, up to 60 lb each, and accommodates bikes with tires up to 4 inches wide. - Versatility is its middle name. Carries the widest variety of bike combinations. - Lightest tilting 2-bike hitch rack around, 27 lb total weight, thanks to compact, single-bar design. - Hauling machine. Can transport 2 bikes, up to 60 lb each. - Open Sesame! Tilting feature allows hatch access, even when fully loaded. - Features integrated locks and reflectors for extra security and visibility, day and night. - Platform style hitch rack - Carries 2 bikes, up to 60 lb/each. - Wheel trays with straps plus a Cuscino encased down-tube cradle securely holds bikes. - Sleek, compact and lightweight build transports two bikes on a single bar. - Accommodating bike space and design fits nearly every type and combination of bicycle, including those with fenders, mountain bikes, eBikes, balance bikes and unicycles. - Integrated locking cable secures bikes to the rack. - Locking hitch pin secures rack to the car - Tilting feature allows access to rear of vehicle, even when fully loaded, and folds up when not in use. - Reflectors on outside wheel trays ensure extra visibility in low light. - Built and tested to outlive the elements. - Universal hitch works with 1¼" and 2" hitch receivers. - Rack weight: 27 lb - This rack fits a wheelbase of up to 48".If your bike has a longer wheelbase, you will need Saris' long wheelbase bar (sold separately). - Universal wheel trays accommodate a wide variety of bikes and wheel sizes (up to 4" tires). - For use with tires wider than 4", add the Fat Tire Wheel Holders (sold separately)
Saris Freedom Fat Tire Wheel Holders
$51.99
Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).
Saris Glide EX 4-Bike
$599.99
You’re cruising down the road with your collection of bikes and make a pit stop to top off the tank. While at the gas station you want to grab a snack from the back cooler and let Rover out for a well…you know. You walk around to the back of your vehicle and realize that you need to unload all these bikes to get access to the hatch. Sorry, Rover. You’re out of luck. Now what if we told you there was a better way? An easier way. A hitch bike rack that lets you access the rear of the car in one step – both with bikes and without. Born in Saris' innovative labs in Madison, Wisconsin, the Glide EX does exactly this thanks to one-step glide action. Simply push the trigger to release the rack, and boom – hatch access. When you’re done, the same amount of (non) effort glides the hitch rack upright. Then you’re good to go, and Rover is too. Featuring easy-to-load bike hold downs, best-in-class ratchet straps and integrated locks, you can speedily fasten your bikes to the Glide EX and know they’re secure as you head toward your next adventure. - Convenient, one-step access to the back of the car - fully loaded with bikes or not. - Innovative four-bar linkage system controls the center of mass, creating a smooth, glide-action away from the vehicle. - Hanging hitch bike rack transports as many as 4 bikes, up to 35 lb. per bike. - Complete integrated security: locks the rack to the car and the bikes to the rack. - Style points: your choice of standard black, head-turning bronze and sapphire blue. - Hanging hitch style bike rack - Carries 4 bikes, up to 35 lb. each. - One-button glide action provides instant access to rear of vehicle, both with bikes loaded and without. - Innovative four-bar linkage system: centers bike mass for smooth, glide-action away from vehicle. - No assembly needed - Rack weight: 37 lb - Bike hold downs are easy to use and quick to load. - Best-in-class ratchet straps speedily fasten bike to the rack. - Integrated locking cable secures bikes to the rack. - Locking hitch pin secures rack to the car. - Universal hitch: fits 1 ¼” and 2” hitches out of the box. - Built and tested to outlive the elements.
Saris Glide EX 5-Bike
$624.99
Grocery-getter. Luggage machine. Move master. Whatever nickname your vehicle has, chances are you picked a car with all that storage space for a reason. And now you can add the Glide EX 5-bike hitch rack to the hauling equation without compromising your vehicle’s functionality. Simply push the trigger to release the rack, glide away and boom – hatch access. When you’re done the same amount of (non) effort glides the rack upright and you’re good to go. It’s the same one-button, one-step, one-motion movement for when the hitch rack is fully loaded and when it’s not. Plus, the Glide EX is decked out with our low-profile bike hold downs and best-in-class ratchet straps. These hold downs carefully cradle your bike and can be easily adjusted to fit a wide range of bicycles. Once bikes are loaded, Saris' ratchet straps snugly and speedily fasten your bike to the rack so you can get where you need to be. The result, a bike carrier that’s ready for any outing on a moment’s notice. - Hello Hatch Access! One-step. One-button. One-step hatch accesses, with or without bikes. - Hanging hitch bike rack transports as many as 5 bikes, up to 30 lb. per bike. - Light and centered: bike weight evenly distributed for smooth operation and aluminum construction makes for a light and durable bike rack. - Complete integrated security: locks the rack to the car and the bikes to the rack. - Designed to be used with 2-inch hitch receivers only. - Hanging hitch style bike rack - Carries 5 bikes, up to 30 lb. each. - One-button glide action provides instant access to rear of vehicle, both with bikes loaded and without. - Innovative four-bar linkage system: centers bike mass for smooth, glide-action away from vehicle. - No assembly needed - Rack weight: 37 lb - Bike hold downs are easy to use and quick to load. - Best-in-class ratchet straps speedily fasten bike to the rack. - Integrated locking cable secures bikes to the rack. - Locking hitch pin secures rack to the car. - Designed to be used with 2-inch hitch receivers only. - Built and tested to outlive the elements.
Saris Guardian (3-Bike)
$119.99
With the Guardian rack, it's easy to take a couple of friends and up to 3 bikes anywhere thanks to a narrow arm design engineered to carry most bikes, including juvenile and BMX models. This awesome bumper-mount rack features Saris' pivoting anti-sway bars with rubber hold-downs to keep your bikes in place and prevent them from banging into each other. Plus, foam pads protect your vehicle from scratches. The Guardian comes completely assembled. Just strap it on and go!
Saris Hatch Huggers
$24.99
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.
Saris Hitch Tite
$12.99 - $13.99
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.
Saris Locking Cable 8'
$40.99
Saris' Locking Cable 8' keeps your bike and rack where you want them: attached to your vehicle. This braided, stainless-steel cable is 8-feet long for plenty of reach. Plus, the vinyl coating protects your vehicle's and bike's finish.
Saris Locking Hitch Tite (Threaded)
$39.99
Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).
Saris MTR 1 Bike
$499.99
Choose your own adventure with the MTR 1-bike hitch rack. Whether you’re feeling me-time or party time, the MTR can adjust for any occasion. The secret is in the MTR’s modular design (after all, MTR stands for “Modular Tray Rack”). Simply add or remove trays to securely haul between one and three bikes to wherever the trail may lead. When you’re ready to hit the road, feel free to take the scenic route. Rugged enough to handle the harshest of environments, the MTR is built with American-made steel and aluminum. Complete with versatile and sleek nesting trays with dual-arm wheel holders, the MTR can carry nearly any rig – from Junior’s MTB to downhill to your favorite eBike – securely, in style and without ever coming into contact with your bike’s frame. The Saris MTR also available in a 2-Bike version. Product Features - Modular: carries 1 bike, up to 60 lbs, and can be customized with Add-On to transport up to three bikes. - Pivot Away: unique wheel trays pivot and nest for easy loading and compact storage. - Dual-arm holders are compatible with a wide range of tire sizes and never touch the bike's frame. - Full Tilt: tilting feature allows easy hatch access without removing bikes. - Complete Integrated Security: locks the rack to the car and the bikes to the rack. - Tray-style hitch bike rack. - Carries 1 bike, up to 60 lb. - Customizable to carry more bikes with 1-Bike Add-On and 2-Bike Add-On - No assembly needed. - Tool-free installation. - Rack weight: 35 lb - Adjustable wheel block to accommodate wheel sizes from 20 inches up to 29 inches and tire sizes as wide as 5 inches. - Easily folds up when not in use. - Integrated locking cable secures bikes to the rack. - Locking hitch pin secures rack to the car. - Accommodates wheel bases up to 53 inches. - Universal hitch: fits 1 ¼” and 2” hitches out of the box. - Constructed from American-made aluminum and steel, and tested to outlive the elements.
Saris MTR 1 Bike Add On
$349.99
Whether you’ve invited more friends for an epic ride or can’t decide which rig to take to the trails, the MTR 1-Bike Add-On has you covered. Compatible with both the MTR 1-bike and 2-bike hitch rack, these add-on trays save you the hassle of buying a new rack to haul more bikes. Built with the same robust materials as the MTR rack, these add-on trays are ready to roll out of the box and are the soul of the Modular Tray Rack (MTR) functionality. Product Features - Bike tray add-on for MTR 1-bike or 2-bike tray-style hitch rack. - Built with American-made aluminum and steel. - Nesting wheel trays speed up bike loading and unloading process. - Wheel trays and dual-arm wheel holders securely transport variety of bikes. - Hauls bikes up to 60 lb if used as first two trays closest to vehicle; or up to 35 lb if used as third or fourth tray. - Bike tray add-on for the MTR platform hitch rack. Compatible with both the 1-bike and 2-bike base. - Carries 1 bike, up to 60 lb when used in the first two positions closest to the vehicle. When used in positions furthest from the vehicle, tray can hold a bike up to 35 lb. - Minimal assembly required. - Rack weight: 30 lb. - Adjustable wheel block to accommodate wheel sizes from 20 inches up to 29 inches and tire sizes as wide as 5 inches. - Integrated locking cable secures bikes to the rack. - Hitch compatibility will depend on MTR base unit. - Built and tested to outlive the elements.
Saris MTR 2 Bike
$799.99
The only thing left to do is answer. No matter where the call beckons, the MTR can get you and your ride there. Designed with versatility at its core, the MTR (aka: modular tray rack) can transport a variety of bikes and can be easily customizable with add-on trays to bring your whole collection of shredders or ride-share with friends. Each MTR rack is built from American-made steel and aluminum for maximum durability. Roomy wheel trays swallow bike tires up to 5 inches wide for a stable hold, while dual-arm wheel holders keep bikes locked in position – and keep the paint chip-free. It’s all built on a rugged hitch-based foundation that can be tilted away, when fully loaded with bikes and without, for fast and easy vehicle access – because after all, those snacks aren’t going to pass themselves. Plus, the MTR’s nesting bike trays make for easy-on, easy-off loading. No more lifting bikes over the rack – simply flip the trays out of the way as needed to get you from parking lot to trailhead in record time. The Saris MTR also available in a 1-Bike version. Product Features - Modular: carries 2 bikes, up to 60 lbs, and can be customized with Add-On to transport up to four bikes. - Pivot away: unique wheel trays pivot and nest for easy loading and compact storage. - Dual-arm holders are compatible with a wide range of tire sizes, and never touch the bike's frame. - Full Tilt: tilting mechanism for easy hatch access. - Complete Integrated Security: locks the rack to the car and the bikes to the rack. - Designed to be used with 2" hitch receivers only. - Tray-style hitch bike rack - Carries 2 bikes, up to 60 lb. each - Customizable to carry more bikes with 1-Bike Add-On and 2-Bike Add-On - No assembly needed - Rack folds up for compact storage when not in use. - Tool-free installation - Rack weight: 55 lb - Adjustable wheel block to accommodate wheel sizes from 20 inches up to 29 inches and tire sizes as wide as 5 inches - Integrated locking cable secures bikes to the rack - Locking hitch pin secures rack to the car - Accommodates wheel bases up to 53 inches - 2" hitch compatible - Constructed from American-made aluminum and steel, and tested to outlive the elements
Saris Protect-O-Pads
$15.99
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.
Saris SUPERBones 3-Bike
$399.99
Meet the SUPERBones. It is the classic Bones 3-bike trunk rack, reimagined. Saris took everything they've experienced, observed and learned from their Bones customers and used it to guide their design process. Out of that work was born a trunk rack more secure, more beautiful and more intuitive. With interwoven steel straps that store neatly within the rack to the floating foot that pivots to conform to a wide variety of trunk shapes, the SUPERBones is truly a functional piece of art with all the features of a forward-thinking bike rack. - Carries 3 bikes (35 lbs/bike) - Anti-sway adjusts in and out to maximize bike protection - Bikes are easy to load thanks to pivoting anti-sway straps. - Integrated locking to secure bike to rack and rack to car - Heavy duty straps reinforced with internal steel strands - Strap adjustment lever quickly tightens rack to car - Internal ratcheting mechanism creates the best-in-class strap management - Adjustable foot for maximum protection of car by intuitively adjusting to vehicle’s trunk, bumper shape and design - Stationary outer leg creates an easy install on vehicle - Frame fits over most spoilers - Rust-free, injection molded plastic - Compatible with most vehicles (consult the Saris Fit Guide for approved fits) - Lightweight at 18.5 lbs
Saris Sentinel 2-Bike
$74.99
Hit the road today with Saris’ Sentinel 2-Bike rack—it’s ready to go right out of the box, easy to mount, and securely holds two bikes. The frame adjusts to the contours of your car and folds down flat for simple storage. To protect your car and provide a solid mount, the four hold-down straps have coated hooks, while the legs are foam-padded. Stiff ratcheting straps ensure a firm grasp on your bikes.
Saris Sentinel 3-Bike
$89.99
Saris’ Sentinel 3-Bike rack is ready to go right out of the box, easy to mount, and, thanks to its narrow arm spread, securely holds three bikes. The frame adjusts to the contours of your car and folds down flat for simple storage. To protect your car and provide a solid mount, the six hold-down straps have coated hooks, while the legs are foam-padded. Stiff ratcheting straps ensure a firm grasp on your bikes.
Saris Solo
$54.99
Easy to mount and a cinch to store in the back of your car, Saris’ Solo is a low-profile rack for peace-of-mind convenience. Solo’s uni-body frame has no adjustable parts, which makes it a no-brainer to set up. With its soft, rubber, pivoting feet and four hold-down straps, the Solo safely and securely attaches to your car. Two strong buckles and an integrated anti-sway strap keep your bike in place. As an added bonus, the Solo is built with 100% recyclable, non-rusting materials.