Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Cranksets

Shimano Altus M361-L Crankset
$51.99 - $57.99
Shimano Acera FC-M361 cranksets feature sturdy construction, reliable shifting, and replaceable chainrings. - Spindle Interface type: Square Taper JIS
SRAM RED 1 AXS Quarq Road Power Meter DUB
$1,200.00
In certain disciplines, the single-ring drivetrain reigns supreme. Championing simplicity, strength and durability, the SRAM RED 1 AXS power meter meets the demands of triathletes, time trialists and cyclocross racers. The power meter features improved aerodynamics thanks to direct mount aero chainrings with fully integrated power, and the tighter gearing range is perfect for racing and flatter terrains. - Single-ring drivetrain simplifies functionality - 48T and 50T variants have fully integrated power into a direct mount aero chainring - 36-46T variants have spider-based power - Chainrings can be easily changed without requiring recalibration of the power meter - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - DUB bottom bracket adds durability and simplicity - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - Bottom bracket not included - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE
Campagnolo Chorus Crankset
$525.00
Campagnolo is all about drivetrain evolution, and their Chorus Crankset proves it. The full-carbon cranks and 4-arm spider feature a unified bolt pattern that allows for all three chainring standards. This design incorporates an 8-bolt pattern with a spider arm that not only holds the chainring in place by way of the bolt, but also supports the chainring to increase system rigidity. The crank arms and spider are hollow for maximum stiffness and minimal weight. The integrated Ultra-Torque spindle joins the crankset together via a toothed Hirth joint in the center. - Chainring BCD: Campagnolo 146 Asymmetric, Campagnolo 112 Asymmetric
Shimano Deore Hollowtech II M6000-2 Crankset
$124.99
Shimano's Deore Crankset features efficiency and fast shifting to let you make the most out of the trails. The smooth shifting rhythm allows you to maintain speed and acceleration over challenging terrain. Hollowtech II technology provides the best balance of stiffness, strength, weight, and rotating performance. Features: - Efficient power transfer - HOLLOWTECH II crank arm with 4-arm construction - Composite chainring - Optimized gear combinations and ratios for trail riding - Close step tooth profile for smooth shifting - Stable shifting performance in any suspension position - Single spike structure for stable shifting - Bottom Bracket compatibility: SM-BB52/BB-MT500-PA - Chain Line: 51,8
Problem Solvers Hex Crank Arm Fixing Bolt/Cap
$7.99
Problem Solvers Crank Arm Fixing Bolts - 8mm - Sold as a pair
FSA Energy Modular BB386EVO Crankset
$269.99
The latest FSA crankset for gravel, adventure, or road use. Thanks to the adaptable BB386 EVO 30mm spindle, this modular system will fit a wide variety of frames with a range of BB standards. - Hollow forged arms - Forged AL7050 BB386EVO spindle - Direct mount outer chainring and 90 BCD inner chainrings - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems - Number of Chainrings: Double - Chainline/Hub Compatibility: 130 Hubs - Spindle Interface Type: 386 EVO - Chainring BCD: 90, Direct Mount FSA - Pedal Spindle: 9/16" - Crank Intended Use: Road, Gravel - Crank Length: 170mm - Rings: 46/30 - Drivetrain Speeds: 11 - BB Included: No - Weight: 755
FSA Gossamer Tandem Front Crankset
$152.99
To be in sync on a tandem is the essence of the experience. FSA's Gossamer tandem cranksets keep your timing perfect, and keeps the power going to the rear wheel where it belongs. The communication and balance? That's up to you and your partner. - Shimano and SRAM 10-Speed compatible
FSA Gossamer Tandem Rear Crankset
$229.99
To be in sync on a tandem is the essence of the experience. FSA's Gossamer tandem cranksets keep your timing perfect, and keeps the power going to the rear wheel where it belongs. The communication and balance? That's up to you and your partner. - Shimano and SRAM 10-Speed compatible - 2 bottom bracket spacers allow for adjustable chainline - 35.0mm tandem-specific braze-on front derailleur clamp included with rear cranks - 7900 and Campagnolo 11-speed compatible chainrings sold separately
SRAM RED 1 Crankset
$690.00
Triathlon. Time Trial. Cyclocross. Some disciplines are made for 1x. And while SRAM's X-Range 2x set up has integrated much of the simplicity of a 1x system, there are still times when a single ring is best. The SRAM RED 1 crankset offers the most demanding racers the right mix of features—aerodynamics, durability, and simplicity. - Single-ring drivetrain simplifies functionality and reduces weight - 48 and 50t variants feature direct mount aero chainrings for better aerodynamics - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - DUB bottom bracket adds durability and simplicity - Can be upgraded to a power meter - Version: D1
Shimano Deore XT M8000 Left Crank Arm
$93.00
Shimano XT Left Crank Arm - Spindle Interface Type: Hollowtech II
SRAM Force Crank Spider
$43.00
SRAM Force crank spiders are for repairing your crank or converting it to different gearing. Available in 110mm and 130mm BCDs.
Race Face Alloy Crank Spindle Spacer
$2.99
- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle
Wheels Manufacturing Inc. PF30 Adapter for 24mm Spindle Cranks
$42.00
The Wheels Manufacturing PressFit 30 Bottom Bracket Adaptor for Shimano Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SHIM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SHIM to adapt 24mm Spindle Cranks (Shimano, FSA, etc.) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter
Wheels Manufacturing Inc. 46mm ID Bottom Bracket Spacer Pack
$21.95
These are 46mm inside diameter cup spacers that fit between a bottom bracket cup and the frame. Machined from 6061 aluminum and anodized black, these spacers can be used for a few different scenarios. First, when used with a Wheels Manufacturing GXP compatible bottom bracket, adding cup spacers between the non-drive side cup and the frame will move the chainrings on a GXP crank closer to the frame (reducing the chainline). Second, for Specialized road frames with the 61mm wide Carbon OSBB shell, you would place 3.5mm of spacers between each cup to effectively widen the BB shell to 68mm when used with non-Specialized cranks. One bag will properly space one 61mm wide Specialized OSBB shell to 68mm. Specs - Bottom Bracket/Frame Interface: Any 46mm ID BB shell: PF30, Specialized Carbon OSBB, 386EVO, 392EVO, BBRIGHT - Inside Diameter: 46.20mm - Outside Diameter: 52.00mm Bag Includes: - 2.5mm bottom bracket cup spacers (46mm ID) x 2 - 1.0mm bottom bracket cup spacers (46mm ID) x 4
SRAM Carbon Crank Arm Boots
$11.00
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly in tact. - Injection molded plastic crank arm protection - Perfect way to protect your carbon crank investment from scratches and dents from pedal strikes - Material: Injection molded plastic - Recommended Group: XX1, X01, XX, X0
Campagnolo Super Record 12x2 Speed Crankset
$995.00
The new Super Record 12x2 Speed crankset: an intense concentration of innovation that results in the greatest possible stiffness and precision in derailing, whilst providing a dedicated aerodynamic “super design." The new carbon fiber Super Record 12x2 Speed crankset has been made lighter on the inside through Campagnolo Hollow Technology, which uses the Ultra-Torque bracket system with a titanium axle to transfer all of the force the athlete applies to the pedal to the drivetrain. The new Super Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters, without affecting the Q factor, which remains constant at 145.5 millimeters thanks to the new hand crank design. The use of ceramic Cult bearings leads to obtaining the smooth ride that the Campagnolo brand is known for. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) combined with the eight fixing screws, optimize weight and stiffness through the increased use of carbon fiber. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.
MRP XCg V2
$64.95
Utilizing MRP's patented integrated skid (US Patents RE 42,436 / 8,235,849 Patents Pending), the XCg tucks neatly behind your crankset and protects those costly chainrings from damage. The replaceable nylon skid glides over rocks and obstacles. - Great accessory to protect costly chainrings - Integrated skid protects chainrings and glides over rocks and obstacles - 88g (XCg V2 32t, ISCG-05 model)
Salt OPC Crank
$19.99
One-piece crankset from Salt BMX. - Crank Length: 170mm - Drive Side Compatibility: Right Hand Drive - Crankset Style: 1-Piece - BB Style: Not Included - BB Included: No
SR Suntour XCM-T Crankset
$35.00
Suntour's XCM-T is a 9-speed triple crankset with melt forged alloy arms that comes in either square taper or Octalink bottom bracket options. - Steel chain rings - Forged alloy crank arms - 50mm chain line with a 113mm BB
SR Suntour XCM-D Crankset
$40.00
A 10-speed, double crankset with melt-forged arms intended to be used with Octalink bottom brackets. - Alloy crank arms - Alloy outer ring, steel inner ring - 48.7mm chain line with a 113mm spindle - Number of Chainrings: Double - Chainline/Hub Compatibility: 135/142 MTB Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Rings: 36/22 - Spindle Interface Type: Shimano Octalink V2 - Drivetrain Speeds: 10 - Chainring BCD: 104, 64 - BB Included: No
Wheels Manufacturing Inc. Repair Pack for T47 Inboard w/30mm Spindle Bottom Brackets
$11.50
Replacement spacer pack for Wheels Mfg T47 with Inboard bearing for 30mm spindle bottom brackets. Individual bearings sold separately. For use with: - T47-BB-30MM-BB - T47-BB-30MM-AC Pack Includes: - 2x - Dust Seal, 42mm OD, 30mm ID - 2x - 0.5mm, 30mm ID Crank Spindle Spacer - 2x - 1.0mm, 30mm ID Crank Spindle Spacer
Wheels Manufacturing Inc. 29mm ID x 0.5mm Crank Spindle Spacer, Bag of 10
$11.95
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. for use with SRAM DUB cranks - 10 spacers per bag - Machined engineering-grade Delrin
absoluteBLACK Oval Chainguide - ISCG-05 + BSA Mount 26-34T
$59.99
The absoluteBLACK Oval Guide is designed specifically for oval chainrings, keeping your chain secure at every single crank position. This small and lightweight chain retention system provides extra insurance that the chain will remain securely located. - Fully compatible with oval chainrings - The adjustable 48-53mm chainline makes it compatible with most bike setups - Includes titanium hardware and spacers - Mounts to ISCG-05 mount with threaded BB cups - Weight: 17.5g
absoluteBLACK Chainring Bolt Set - Long Bolts and Nuts Set of 5
$21.99
absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Long bolts are used for the following chainrings: 110 BCD 5-bolt outer and inner road oval, 130 BCD 5-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings - Set of 5
Race Face 2008+ Next SL and 2012+ Atlas Crank Bolt/Puller
$8.99
Race Face crank bolt/puller for 2008 and newer Next SL cranks and 2012 and newer Atlas cranks.
Wolf Tooth Components CAMO Chainring Bolt Kit
$5.00
Accessorize your CAMO system with these high quality bolts. Made from durable ED coated steel, they're designed specifically for the CAMO system. - Bolts designed specifically for use with CAMO spiders and rings - Includes 5 Torx head M5 x 8mm bolts - ED coated steel is durable - Bolts include a blue Nylok patch for a secure installation - Torque bolts only to 4-5 Nm and use blue Loctite threadlocker
Wolf Tooth Components CAMO Direct Mount Spider for SRAM
$29.95
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the SRAM cranksets that have removable Direct Mount spiders and are only compatible with CAMO rings and bolts. Four different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - M2 (minus 2mm - dished toward the frame): For 49mm chainline on short-spindle BB30 cranks - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank. Can also be used to achieve a Boost chainline with a short-spindle BB30 crank.
Race Face Next SL G4 Crank Boots
$9.99
Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
FSA PowerBox Alloy Road Crankset
$699.99
FSA’s Road PowerBox Alloy Crankset employs a P2M convertible spider design for multiple chainring options. FSA's alloy arms and BB386EVO spindle mated together produce a very lightweight, extremely versatile power meter crankset available with a double chaining configuration. Firmware upgrades available for more features. - Cold forged AL6061/T6 aluminum crank arms - BB386EVO 30mm AL 7050 alloy spindle fits every frame (purchase BB separately) - AL7075 CNC chainrings - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems - Spider-based power sensors provide total power output measurement of both legs, with Left & Right leg output analysis available with system upgrade - Bluetooth connectivity available with system upgrade - Battery life is approximately 300-400 hours - Easy-to-replace CR2450 battery
SRAM GX Eagle DUB Crankset
$135.00
Some riders test their limits more than others. For these riders, the GX Eagle DUB crankset allows them to go all in, every day they ride. The best aluminum crankset we make, engineered to deliver consistent performance every ride. Featuring our X-SYNC 2 tooth profile chainring for complete chain control, each tooth's thickness is toleranced and controlled to work seamlessly with the chain's inner and outer links. DUB technology's patented spindle design and bottom bracket provide a uniform approach to fitment, better sealing, and forward and backward compatibility. Simply put, the forged aluminum GX Eagle DUB crankset is the no-frills choice of riders who know. - Our best aluminum crankset - Direct mount interface compatible with chainrings across the entire Eagle Ecosystem - Master GX colorway as part of Eagle Colorsystem—pairs with all cassettes and chains, from Black to Gold to Rainbow to HardChrome and all-new Copper
Wheels Manufacturing Inc. BSA Bottom Bracket Spacer
$4.95
Wheels Manufacturing 2.5mm Black Aluminum Bottom Bracket Spacers are for adjusting chainline or bearing play in English (BSA) or Italian threaded bottom brackets.
FSA K-Force WE Crankset
$531.99
This Hollow Carbon Crankset features reduced weight, and excellent stiffness. The K-force WE system is perfect for triathlon and/or time trial riders who want advanced technology without the bulk. - Lightweight hollow carbon arms with UD carbon finish - Maximum frame compatibility with a forged AL7050 BB386EVO spindle - Innovatively designed for a better ride, the variable thickness means that it’s reinforced at critical stressed areas and reduced in other areas for lighter weight - Chainring pins are AL7075 forged then 100% CNC 3D machined, to increase outer chainring stiffness and provide efficient up-shift pin design for full-power performance - AL7075 Torx T-30 alloy chainring bolts - Number of Chainrings: Double - Crank Intended Use: Road, Tri - Pedal Spindle: 9/16" - Rings: 50/34 - Spindle Interface Type: 386 EVO - Drivetrain Speeds: 11 - Chainring BCD: 110 - Weight: 534 - BB Included: No
FSA Gossamer Pro Modular AGX+ Crankset
$178.00
Not ready for carbon? The Gossamer Pro Modular AGX+ is a high-end crankset for alloy lovers. The cold-forged aluminum arms are heavily scalloped for the maximum strength-to-weight ratio. Thanks to the adaptable BB386 EVO 30mm spindle, this modular system will fit a wide variety of frames with a range of BB standards. - Cold-forged alloy spider - CNC-machined alloy spindle - Chromoly chainring bolts - Q-Factor - 154mm - Chainline - 47mm - BCD - DM/90mm - Chainrings - 46/30T - 656 grams (46/30T x 170mm)
Wolf Tooth Components Set of 4 Chainring Bolts+Nuts For 1x
$24.95
Wolf Tooth designed these bolts to be the best on the market. These optimized single chainring bolts have a 4mm hex socket on the bolt and a 6mm hex socket on the nut...that's right, no more spanner for your single ring bolts! These are 6mm long so they work perfectly with any bolt on single chainring that does not have threaded standoffs. - 6mm length - Made in the US out of 7075 Aluminum Alloy - Has hex heads on both the bolt and nut for easy installation - Max torque of 6-7 Nm with light grease on threads only
Wheels Manufacturing Inc. Freewheel/BB Spacer
$19.95
Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10
SRAM Rival 1 Crankset
$183.00
Forget front derailleurs; SRAM's Rival 1 Crankset brings a game-changing upgrade in performance and reliability to cyclocross, road, and other 700c disciplines. It combines the durability, simplicity, and efficiency SRAM is know for on the road with their 1x mountain technology, X-Sync. - Single-ring drivetrain simplifies functionality - Forged aluminum with detachable spider: 42T and 52T X-Sync tall, square tooth design provides maximum control - Sharp, narrow tooth profile and rounded chamfer edges help manage a deflected chain - Mud-clearing recesses for the inner chain links and rollers - Weight: 799g (24mm spindle, 172.5mm, 42T, no BB)
SRAM Force 22 Crankset
$268.00 - $303.00
SRAM's Force 22 Crankset uses unidirectional carbon arms with a forged aluminum spider and integrated bottom-bracket axle to ensure top-notch stiffness for awesome power transfer and exceptionally low weights. Experience phenomenal front shifting with SRAM's X Glide R chainrings that start out as 5mm-thick aluminum plates and then precision machined to eliminate all unessential material while retaining extreme stiffness. With so much great technology and 11-speed compatibility, they're a force to be reckoned with.
absoluteBLACK Crank Bolts and Covers for Ultegra 6800 Cranks
$54.99
The absoluteBLACK premium crank bolt and bolt cover sets are designed to cover the small step down between chainring and crank arms. - Designed to fit Shimano Ultegra 6800 cranks - Includes 4 T30 Torx bolts and 4 bolt covers - Not compatible with absoluteBLACK Sub Compact oval chainrings
absoluteBLACK Chainring Bolt Set for 30T Oval Rings
$12.00
absoluteBLACK chainring bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Replacement bolts for 30T 104 BCD oval rings
absoluteBLACK Oval Chainguide - ISCG-05 Mount 26-34T
$64.99
The absoluteBLACK Oval Guide is designed specifically for oval chainrings, keeping your chain secure at every single crank position. This small and lightweight chain retention system provides extra insurance that the chain will remain securely located. - Fully compatible with oval chainrings - The adjustable 48-53mm chainline makes it compatible with most bike setups - Includes titanium hardware and spacers - Mounts to ISCG-05 mount - Weight: 22.2g
Wheels Manufacturing Inc. Crank Spindle Wave Washer
$17.95
Wheels Manufacturing Wave Washers help eliminate side play in cranks or pre-loaded angular contact bearings. Please refer to your crankset manufacturer's installation instructions for proper placement. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Uncompressed Thickness: 2.1mm - Compressed Thickness: 0.5mm - Spring Steel - 10 per bag
Wheels Manufacturing Inc. 29mm ID x 1mm Crank Spindle Spacer, Bag of 10
$11.95
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. - 1.0mm thick - 10 spacers per bag - Machined engineering-grade Delrin
absoluteBLACK Chainring Bolt Set - Long Bolts and Nuts Set of 4
$17.99
absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Long bolts are used for the following chainrings: 110 BCD 4-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings - Set of 4
Wolf Tooth Components CAMO Direct Mount Spider for Race Face Cinch
$29.95
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the RaceFace cranksets that have removable Cinch spiders/chainrings and are only compatible with CAMO rings and bolts. Three different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank
absoluteBLACK Integrated Headset Top Cap and Bolt
$19.99
The absoluteBLACK integrated headset top cap is a one-piece top cap and bolt with a 5mm hex socket. It is designed to fit every standard starnut. - One-piece design is lightweight (only 4g) - Not suitable for "expanding" star nuts with a steel coil spring - Compatible with the ENVE compression plug
FSA SL-K Modular BB386EVO Crankset
$420.00
SL-K modular BB386EVO is the latest FSA crankset for gravel, adventure, or road use. Thanks to the adaptable BB386 EVO 30mm spindle, this modular system will fit a wide variety of frames with a range of BB standards. - Hollow carbon fiber arms with UD finish - Forged AL7050 BB386EVO spindle - Direct mount outer chainring and 90 BCD inner chainrings - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems
FSA SL-K BB392 Tandem Crankset
$543.99
The FSA SL-K carbon tandem cranks feature an asymmetrical modular compact 2 x 11-speed spider, 30mm spindle, and tons of adjustability. - Hollow carbon arms with UD carbon finish - Asymmetrical 110 A.B.S BCD achieves 4 chainlines (44,47,50,53) - English BB included - 104 BCD timing spider - 653 grams - Number of Chainrings: Single - Crank Intended Use: Tandem - Pedal Spindle: 9/16" - Rings: 38 - Spindle Interface Type: 392 EVO - BB Included: English
Promax CF-2 Crank
$149.99
Promax's CF-2 BMX Crankset features cold-forged 6061-T6 aluminum arms, a 2-piece design, and included external bottom bracket. - BCD: 104mm - Spindle diameter: 24mm
absoluteBLACK Oval Chainguide - S3/E-Type Direct Mount 26-34T
$59.99
The absoluteBLACK Oval Guide is designed specifically for oval chainrings, keeping your chain secure at every single crank position. This small and lightweight chain retention system provides extra insurance that the chain will remain securely located. - Fully compatible with oval chainrings - The adjustable 48-53mm chainline makes it compatible with most bike setups - Includes titanium hardware and spacers - 26-34T capacity for oval chainrings or 28-36T capacity for round chainrings - Mounts to SRAM S3 and Shimano E-type/E2 - Mounting points must be attached to the main frame - Weight: 17g
Wheels Manufacturing Inc. Crank Spindle Spacer
$11.50
Use these Wheels Manufacturing Crank Spindle Spacers to adjust chainline or bearing play in bottom brackets. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Machined engineering-grade Delrin - 10 spacers per bag
Promax SQ-1 Crank Arms
$79.99
Promax SQ-1 Crank Arm sets more than cover your need for hard-to-find lengths and hard-to-miss colors. - BCD: 110mm - Weight: 25.2 oz.
e*thirteen by The Hive ISCG Mounting Bolt Kit
$9.95
- Replacement bolt kits for mounting chain guides to ISCG and ISCG-05 frame tabs - Kits include chainline adjustment spacers - 8/12mm button head bolts for single ring steel backplate guide applications - 10/16mm flat head bolts for single ring alloy backplate guide applications
absoluteBLACK Crank Bolts and Covers for Dura-Ace 9100 Cranks
$54.99
The absoluteBLACK premium crank bolt and bolt cover sets are designed to cover the small step down between chainring and crank arms. - Designed to fit Dura-Ace 9100 cranks - Includes 4 T30 Torx bolts and 4 bolt covers - Not compatible with absoluteBLACK Sub Compact oval chainrings
absoluteBLACK Crank Bolts and Covers for Dura-Ace 9000 Cranks
$54.99
The absoluteBLACK premium crank bolt and bolt cover sets are designed to cover the small step down between chainring and crank arms. - Designed to fit Shimano Dura-Ace 9000 cranks - Includes 4 T30 Torx bolts and 4 bolt covers - Not compatible with absoluteBLACK Sub Compact oval chainrings
Race Face Chainring Bolt Pack
$2.54
Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.
Easton Chainring Bolts
$16.99
- Chainring bolts for double cranks - Torx heads
TruVativ M15/M22 GXP Crank Arm Self-Extracting Bolts
$10.80
TruVativ Crank Arm Fixing Bolts - Monocoque carbon crankset with hollow-arm design - FSA Mega Tooth chainring design greatly improves chain retention - FSA BB392 compatibility allows use in nearly any frame - Bottom bracket not included
Quarq DZero Power Meter Spider for Specialized
$779.00
DZero is Quarq's next-generation power meter platform for those who live to be challenged, pushed, and tested in the toughest scenarios imaginable. Now Quarq has introduced a DZero spider designed to replace the factory spider on Specialized's S-Works carbon crankset. Quarq DZero for Specialized embodies 10 years of Quarq advances in power meter technology, plus new features such as dual Bluetooth low energy and ANT+ wireless data transfer, revised circuitry, a new strain gauge design and the Qalvin BLE app. You also get AxCad accelerometer cadence, the easy-to-replace CR2032 battery, an IPX7 waterproof rating and a 2-year warranty. Features & Benefits: - Bluetooth low energy technology and ANT+ wireless data transfer - AxCad – no cadence magnet required - 10K Temperature Compensation - Battery – CR2032, 200-hour battery life, change without tools - Power Balance - OmniCal – swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy – within 1.5%, measuring both legs - Free firmware upgrades with the Qalvin app Essential Details: - Traditional 5-arm spider compatible with Specialized S-Works Carbon Road Crank Arms from 2013-Current. - Available in 130 BCD and 110 BCD. - Replaces the standard spider. - A Specialized lockring tool is required for installation.
absoluteBLACK Chainring Bolt Set - Short Bolts and Nuts Set of 4
$17.99
absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Short bolts are used for the following chainrings: 104 BCD oval 34/36t, 104 BCD round 32/34/36/38t, and bashrings - Set of 4
Page 1 of 2 Next page