Parts & Accessories
Race Face crank bolt/puller for 2008 and newer Next SL cranks and 2012 and newer Atlas cranks.
Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)
Race Face Cinch aluminum crank arm bolt. 18mm, fits XC/AM cranks.
Race Face CINCH Crank Puller • Puller cap for Cinch model Race Face cranks only, including Next SL, SixC and Turbine • Puller cap utilizes 16mm hex key • 26mm thread
Spindle and hardware kit for Race Face CINCH MTB and fatbike cranks.
Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.
- 7075-T6 aluminum direct mount spider or lockring to fit Race Face Cinch system splined cranks - RF-3296 spider is required for running 2-ring setups with Boost (Race Face 1x Direct Mount rings work fine with Boost) - Mounts using a common Park BBT-22 tool
Replacement CINCH Preload Ring for non-driveside Race Face CINCH cranks
Race Face Crank Arm Tab Spacers • Spacers are used to protect the outer chainring tabs and enhance aesthetic when no outer ring or bashguard is used • Fits all Race Face cranksets • Use double bolts
Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
Race Face aluminum Torx chainring bolt/nut set for double and triple chainrings. Includes four bolt sets.
Replacement crank bolt/puller set for Race Face NEXT XC, SIXC, and 2088 and newer Deus cranks.
Replacement spindle spacers for Race Face X-Type FR/DH cranksets.
Replacement spindle spacers for Race Face X-Type XC/AM cranksets.
The North Shore Billet 2×10 Spider replaces the stock chainring spider so that you can run smaller chainrings on SRAM XX1, X01, X1, X0, X9, X7, and GX cranks using GXP bottom brackets. With the NSB 2×10 Spider you can run a more traditional 22/32T or 24/34T combination. The NSB 2×10 Spider is designed to use any standard 64 / 104 BCD 9 speed chainring. The distance between the rings and the distance from the centre of the bottom bracket is the same as the 120 BCD spider so the set up is simple and the shifting is quick!
The 1x guide is the definitive cross-country chainguide. Used on the World Cup circuit and even in the 2012 London Olympics, the 1x has a proven track record of dependability and performance. The 1x is the perfect guide for riders and racers wanting a lightweight single-ring front drivetrain for cross-country use or riders wishing for more security out of their "narrow/wide" or XX1/X01 setups. Freshly updated for 2015 with the new co-molded "TR" upper guide - lighter and quieter, what's not to love? - Adds security to "narrow/wide" 1x10/11 and XX1/X01 drivetrains - Most models accommodate 26-38t chainrings - Tracked and grooved upper guide / backplate interface increases stiffness and eases installation - New co-molded "TR" upper guide with softer durometer interior for silent guidance - All install and adjustment operations possible with just a single 4mm HEX wrench. - BB mounted guides are only compatible with traditional, threaded BB systems
With the SXg, MRP delivers a guide without compromise and with no equal. No longer does the desire for protection and both upper and lower retention have to come at the expense of weight, efficiency, or the addition of moving parts - have your cake and eat it too. With the SXg covering all those bases, it’s the first guide in history that’s equally at home on anything from aggressive, short-travel bikes to Armageddon-ready Rampage rigs, and everywhere in-between. It’s a guide that refuses to be pigeon-holed, blurring the lines between typical industry definitions - a little country and a little rock, as they say. But, in this case, it’s a whole lotta rock. High-security chain retention and bulletproof chainring defense in an innovative, lightweight package with zero efficiency loss make the SXg ideal for a wide range of uses. Whippersnapper™ technology provides lower retention without moving parts or friction. The most advanced chainguide on the market, the SXg is the go-to of the top Rampage stuntmen, World Cup downhill pilots, and superhuman enduro tacticians. - Whippersnapper™ lower guide. - Full-size, nylon HD upper guide with co-molding. - Integrated SX skid provides safeguard to the chainring and glides over rocks and obstacles. - Nylon and TPU co-molding in the Whippersnapper™ provides durable protection from external blows and mutes internal contact with the chain. - Swingset™ hardware. - All installation and adjustment operations are possible with just a single 4mm HEX wrench. - Available in 30-34t and 34-38t sizing. - Alloy guides compatible with chainlines 49mm and wider, carbon 50mm and wider. Boost 148 compatible. - ISCG-05 only. - 149g (34-38t Alloy ISCG-05)
Replacement crank spindle for Easton EC90 SL cranks
The Easton Spider and Ring assembly features the Cinch Direct Mount System, making a swap between ring configurations a fast and simple procedure. This system also provides a significant weight savings by eliminating the material overlap and extra bolt hardware that is required for a traditional spider with chainring configuration. - EA90 Aluminum
Easton spider and ring assemblies for CINCH cranks.
Aluminum bash guard.
All-City's lightweight Cross Wizard chainring guard is the perfect addition to a single ring or singlespeed setup. While not a full-on mountain bike ‘bash guard’ these are just the thing to keep your chain on and your teeth intact. Named after the one and only Cross Wizard! (You have to say it like that, with the exclamation at the end.) These are available in 110mm and 130mm bolt circle diameters for all your ‘crossy needs. - Material: CNC machined 6061-T6 aluminum
Previous page Page 2 of 2