The heart of the connected cadre. The SRAM RED eTap AXS rear derailleur is AXS enabled for easy personalization and designed for both 1x and 2x systems. Advanced chain management keeps it silent and secure no matter the terrain. The derailleur also comes with faster pulleys, bearings, motors, and signals, improving speed in every way. - SRAM AXS-enabled for easy personalization - Orbit chain management technology keeps drivetrain quiet and secure - A single rear derailleur for all gearing combinations, including 1x and 2x - Improved motor and signal travel for faster shifting - Larger X-SYNC pulleys and ceramic bearings for increased durability and efficiency - Compatible with existing eTap batteries - Battery sold separately
More than a mechanical derailleur with a battery and a motor bolted on, the Eagle AXS derailleur is the heart of the whole AXS system. It features a shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard from mechanical Eagle. Instantaneous shifts from a single touch even while under World Cup-winning chain loads recorded in the heat of racing and affirmed in the test lab. Tested to IP69K water and dust proofing standard so whatever race day brings, you’re ready. - XC focus and trail ready - Carbon cage - Ti hardware - Rainbow colorway - Eagle technology - Overload Clutch protection - AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components - System is completely water and dust proof to IP69K - Eagle AXS is designed to work with X-DOME Eagle cassettes only, providing the most precise, silent, and reliable shift performance available. - Battery sold separately
If your ride doesn't feel complete until you get a little dirt on your tires, you know the importance of capable components that can tackle anything. The RED XPLR eTap AXS rear derailleur is a dedicated 1x-specific unit designed for use with the XPLR 10-44 cassette. It makes for an uncluttered drivetrain that takes on pavement and singletrack with equal aplomb. Wireless and proven eTap shift logic, AXS connectivity and advanced chain management mean this derailleur does exactly what you want when you need it. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - 1x specific for use with 10-44T XPLR and 10-36T cassettes - SRAM AXS enabled, allowing easy personalization - Chain management keeps the drivetrain quiet and secure - Large X-SYNC pulleys for increased durability and efficiency - Compatible with existing eTap batteries - Cage Material (RD): Aluminum - Pulley Bearings Material: Ceramic - Max Tooth: 44
Shimano's unbelievable Di2 technology has made the leap to the trails with their XTR Di2 drivetrain. This rear derailleur features all of the race-day performance you've come to expect from XTR, and the unrivaled stability, speed, and performance of an electronic drivetrain. Since there aren't any cables to stretch or housing to create friction, shift performance stays amazingly perfect, delivering flawless shifts any time, under any condition. System communication with the front derailleur eliminates chain rub and, if you prefer, the rear derailleur can be optimized to use Shimano's Synchronized Shift technology.
The Campagnolo Super Record EPS 12 speed front derailleur allows for maximum front shifting performance through its inner semi-cage design which helps the chain engage with the chainring. - Designed with a narrower cage for correct coupling with the 12 speed chain - Dedicated positions for each chainring help to avoid any contact between chain and cage, reducing the possibility of dropping the chain. - Derailleur body is crafted from monolithic carbon powder technopolymer for a lightweight and stiff unit Specifications: - Double or Triple: Double - Derailleur Capacity: 16 - Front Der/Shifter Compatibility: Campy Record/Super Record EPS - Front Derailleur Style: Traditional - Front Derailleur Clamp: Braze-on - Drivetrain Speeds: 12 - Weight: 132g
The SRAM RED eTap rear derailleur executes shifts the instant you demand, wirelessly. It's easy to set up, clean in appearance, and delightfully uncomplicated. Mechanical necessities, such as a carbon pulley cage, ceramic pulley bearings, and anodized alloy artfully blend with proprietary electronic advancements to deliver a shifting wonder. - SRAM eTap shift logic and wireless operation - Fits all 11-speed SRAM road cassettes up to 11-32T - 2x and 1x compatible - Updated version of the original SRAM RED eTap rear derailleur - Orbit chain management technology keeps drivetrain quiet and secure - Larger X-SYNC pulleys and ceramic bearings for increased durability and efficiency - Compatible with existing eTap batteries
- Ergonomic Shifting Operation Without Stress - Shimano Synchronized Shift - Low Profile Rear Derailleur Design - Shimano Shadow Rd - Race Endurance For Less Damage In Crush - Maintains Compact And Smooth Appearance - Maximum Sprocket: 30T - Minimum Sprocket: 11T - Maximum Front Difference: 16T - Total Capacity: 35T
One rear derailleur to rule them all. The SRAM Force eTap AXS rear derailleur is designed for both 1x and 2x systems. It capitalizes on X-Range gearing technology for enhanced range and chain management and features larger pulleys for improved durability and efficiency. Strong, smooth, quiet and AXS enabled. - SRAM AXS enabled, allowing easy personalization - Orbit chain management technology keeps the drivetrain quiet and secure - A single rear derailleur for all gearing combinations, including 1x and 2x - Larger X-SYNC pulleys for increased durability and efficiency - Compatible with existing eTap batteries
The Super Record 12-Speed rear derailleur combines the highest quality materials for exceptional weight and unparalleled performance. The unidirectional carbon fiber front rocker arm reduces weight, with an innovative shape that envelopes the cassette better, thanks to 3D Embrace technology, creating a double effect: allowing the chain to maintain optimum traction at all times, thus increasing the speed, power and precision of shifting. - Carbon fiber-reinforced construction, to increase strength while keeping weight to a minimum - Optimized spring return for constant chain tension - Adjustment of the initial rear derailleur position - Removable pivot on the upper body - Optimized to work with cassettes from 11 to 34 teeth Specifications: - Largest Cog: 34 - Rear Derailleur Mount Type: 10x1 Standard - Chain Wrap Capacity (teeth): 37 - Cage Length: Medium - Rear Der/Shifter Compatibility: Campy 12-Speed Chorus/Record/Super Record 2019+ - Drivetrain Speeds: 12
With the fast and accurate Di2 shifting technology, the Shimano 12-speed Ultegra RD-R8150 rear derailleur is extremely versatile thanks to a single cage length option compatible with 11-28, 11-30, and 11-34 cassettes. - Compact design includes an integrated wireless unit, charger, switch - Wider range capacity - Max. low sprocket 34t - LED status indicator - Battery indicator, pairing, adjust mode etc.
The SRAM Force eTap AXS front derailleur is AXS enabled for easy personalization. The redesigned derailleur offers better rear-tire clearance—for those that explore all roads—and works perfectly with all chainring combinations. No compromises; never miss a shift. - AXS enabled for easy personalization - Elegant and streamlined form for more rear-tire clearance - SRAM Yaw trimless cage technology with an optimized cage profile for new chainring combinations - Compatible with existing eTap batteries
Grab ahold of Shimano's Dura-Ace Di2 Front Derailleur and say hello to near-telepathic shifting. This futuristic front derailleur monitors the position of both derailleurs and trims automatically, ensuring that you have proper derailleur position and no chain rub, no matter what chainring and cog combination you may find yourself in. This is also the fastest and most accurately shifting front derailleur Shimano has ever made, getting you into the big ring more reliably and with greater speed. The derailleur uses Shimano's E-Tube wiring system for waterproof connections and simple, clean setup, and the lack of cables and housing increases service life and reliability.
With an integrated chain stabilizer mechanism, the Shimano GRX derailleur provides a quieter experience with shifting security and precision on mixed terrain. For rides on smooth surfaces, the derailleur features and ON/OFF switch for the chain stabilizer. The RD-RX817 Di2 version offers the digital precision of Shimano electronic shifting, as well as synchronized shifting and is compatible with MTB cassettes with a max cog size of 42T. - Adjustable, gravel-tuned chain stabilizer prevents chain slapping and drops - Switch stabilizer ON/OFF to match the terrain - Silent and uninterrupted rear shifting on rough terrain - Compatible with current road Dual Control Levers - High cog: Max. 11T/Min. 11T - Low cog: Max. 42T/Min. 40T - Total capacity: 31T
$313.00 - $333.00
It takes a degree of passion for the sport that can’t be faked to fully appreciate SRAM RED. It was created to blur the boundaries between machine and athlete. The SRAM RED rear derailleur was designed with Exact Actuation technology for precise, efficient shifting. Carbon fiber, titanium, and ceramic bearings complete the spec. The result adds to its legacy as the heart of the purest groupset for the pursuit of cycling excellence. - SRAM 11-speed compatible - WiFLi option - Carbon cages, carbon inner links, titanium hardware - Exact Actuation shifting provides fast and accurate shifts - Silent shifting with optimized AeroGlide pulleys, ceramic bearings - Spring-fixed barrel adjuster - Chain pulley cage adds precise chain management - Titanium pinch bolt keeps a low profile while minimizing weight - Speeds: 11 - Material: Carbon cages, Carbon inner links, Aero designed titanium hardware - Weight: 145 grams short cage), 165 grams (mid cage) - Compatibility: SRAM RED & Force Rear Shift-Brake levers, SRAM R2C Aero SL-1190 shifters, - SRAM R2C Aero SL-1150 shifters, SRAM 900 Aero brake levers, SRAM 500 Aero brake levers - Finish: Falcon grey & black anodized - Tech Highlights: AeroGlide Pulleys, Exact Actuation - Largest Cog (teeth): 28 (short cage) 32 (WiFli Medium Cage)
The TR12 drivetrain system is the result of an intimate development relationship with 5x DH World Cup Overall Champion, Aaron Gwin, and his personal mechanic, John Hall. From start to finish, the project spanned more than two full years of conceptualizing to achieve this high-performance design. DERAILLEUR The new TR12 rear derailleur is able to provide a quiet and accurate ride over the roughest trails. The key feature to this pursuit is the Hall Lock. During the Race season, lead mechanic for Intense Factory Racing, John Hall, noticed excessive movement around the B-knuckle when riding over rough rock gardens and in tracked out corners. This was leading to more chain skipping and slapping creating possible variances in shifting. This inspired John's idea to lock the B-knuckle to the bike's derailleur hanger. TRP engineers worked closely with Hall to create this feature, The Hall Lock. - Hall Lock - G-Spec Ratchet Clutch - G-Spec finishing touches - Carbon fiber cage & upper link - Extra-wide parallelogram pivot - Sealed cartridge bearing pulleys SHIFTER Ergonomics are key to Aaron, which is why he wanted something a little different. As a result, TRP engineers looked at the cable release lever's ergonomics and devised a system to move it in a linear path to mimic the motion of a rider's thumb, rather than rotating it away. This unique positioning allows for a more consistent contact patch providing overall better grip and shifting performance when the trail gets rowdy. - Shift levers designed and located for optimum performance by Aaron Gwin - New linear actuation for improved ergonomics and consistent thumb contact - Enhanced grip & tactile feel built into lever paddles: embossed grooves on advance and release lever - Carbon fiber upper housing & advance lever position with brake lever - Ball bearing equipped - 12 speed - Tool-free straight-lace cable changes - Rider-adjustable home position of lower lever with a 40-degree range
With SRAM's WiFLi RED Rear Derailleur, SRAM set out to make their already race-proven design faster, quieter, and able to accommodate a full 11-32 cassette for a huge gear range. Through careful analysis of design, material selection, and component integration, they achieved all three. Refined shaping and a hollow titanium fixing bolt lighten the overall weight while maximizing performance. Carefully sculpted jockey wheels work together with the new chain pulley cage for lightning-fast, ultra-precise shifts. An updated elastomer coating applied to the jockey wheels makes for extra quiet operation. Plus, a redesigned shift cable routing makes set-up and adjustment easier than ever! Fast, quiet, and capable, the RED derailleur delivers!
Occupying a new realm in shifting performance, the redesigned XX1 Eagle derailleur gives no-compromise racers and dream-bike builders a true top-tier option. The crisp, precise XX1 shifting feel athletes rely on now features an updated cage geometry for improved chain management. Occupying its rightful place at the top of the Eagle ecosystem, the XX1 Eagle rear derailleur makes full use of the new 10-52T cassettes and is backward-compatible with 10-50T cassettes, as well. - Updated cage geometry provides better chain retention and crisper shifting - Comes in XX1 Eagle master colorway as part of Eagle Colorsystem to go with all cassette and chain color options - Backward-compatible with 10-50T cassettes, works with new 10-52T cassettes
This one takes all your trail dreams, from XC to enduro, all the way to eleven. SRAM's XX1 rear derailleur packs a massive amount of technology into its compact, lightweight body. It uses a “horizontal parallelogram” design that limits all movement to the horizontal axis, reducing the force it takes to shift. The Type 2 clutch is brilliant. This self-lubricating, one-way roller clutch controls your chain tension to eliminate chain slap and give you smooth, consistent shifts over any terrain. For quicker, smoother, more exact shifting, the large upper pulley's offset design maintains a consistent chain gap across all gears.
With SRAM's RED Rear Derailleur, SRAM set out to make their already race-proven design lighter, faster, and quieter. Through careful analysis of design, material selection, and component integration, they achieved all three. Refined shaping and a hollow titanium fixing bolt lighten the overall weight while maximizing performance. Carefully sculpted jockey wheels work together with the new chain pulley cage for lightning-fast, ultra-precise shifts. An updated elastomer coating applied to the jockey wheels makes for extra quiet operation. Plus, a redesigned shift cable routing makes set-up and adjustment easier than ever! Light, fast, and quiet, the RED derailleur delivers!
The Campagnolo EKAR Rear Derailleur is designed for the 1x13-speed EKARndrivetrain with a gravel-orientated performance & build. - 2D parallelogram trajectory offers precise mechanical movement for 13 sprockets - High grade polymer pulley wheels (12T upper, 14T lower) allow for smooth chain running and secure retention - Carbon fiber-reinforced polyamide and anodized 7075 and 6082 alloys are lightweight, strong, and durable - Stainless steel bolts for strength and long-term resilience on gravel - Includes clutch lock for easy wheel removal Specifications: - Largest Cog: 44 - Rear Derailleur Mount Type: 10x1 Standard - Chain Wrap Capacity (teeth): 34 - Cage Length: Medium - Rear Der/Shifter Compatibility: Campy EKAR - Drivetrain Speeds: 13 - Weight: 275g
Shimano Ultegra Di2 Shadow rear derailleur. - Sleek integrated appearance - New low-profile design - Shimano Shadow RD - Race endurance - Optimized slant angle - Maintain race concentration with more intuitive shift control - System communication with front derailleur - Shimano Synchronized Shift - Wide compatibility - Short cage covers: 11-25T to 11-30T - Medium cage covers: 11-28T to 11-34T - Average Weight: 242 grams (SS type), 249 grams (GS type)
The 7-speed X-HORIZON rear derailleur makes shifting smooth and reliable no matter where you ride. Engineered to maintain consistent chain gap across all seven gears, X-HORIZON eliminates vertical movement for faster shifting, reduced shift force, and an end to ghost shifting. Our new, Type-3 roller bearing clutch features a smoother torque curve for a quieter, more consistent operation and feel. The 12-tooth X-SYNC pulley wheel holds the chain in place, reducing bounce and chain slap. Additionally, CAGE LOCK technology makes wheel removal and installation easier than ever. Paired with the X01 DH 7-speed shifter, X-HORIZON forms the backbone of X-ACTUATION technology—and that means completely smooth shifting action. - Updated design of the rear derailleur incorporates our proven X-HORIZON design and new Type-3 roller bearing clutch technology - 12-tooth X-SYNC pulley wheels - Large upper pulley offset automatically adjusts chain gap - Sealed cartridge bearings
On any surface you can imagine, in any drivetrain configuration, the Rival eTap AXS rear derailleur will handle it. Secure chain management and fast, precise shifting make for a smooth and quiet ride, every time. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - Compatible with both 1x and 2x drivetrains - 36T cog max derailleur works with 10-28T, 10-30T, 10-33T, and 10-36T cassettes - SRAM AXS-enabled, allowing easy personalization - Spring clutch keeps the drivetrain quiet and secure - X-SYNC pulleys for increased durability and efficiency - 36T max rear cog - Battery Not Included
Combining Shimano's Di2 platform and the road incarnation of Hyperglide+, the Ultegra FD-R8150 front derailleur shifts between chainrings with the fast and seamless action. - Small, sleek and lightweight front derailleur - Frontal area is smaller than previous designs to reduce aerodynamic drag - Top gear teeth capacity: 50-54t - 61-66 degree chainstay angle - Includes 1 SD300 port
The SRAM Force 1 rear derailleur adopts all the technologies of SRAM 1x MTB to provide the fastest, quietest 1x shifting available. SRAM’s unique clutch system eliminates chain slack, providing for smoother, quieter, and more secure chain travel. - A dedicated 1x rear derailleur - EXACT ACTUATION for fast and accurate shifts using SRAM’s 1:1 actuation ratio (shifter cable travel: derailleur movement). - 10- and 11-speed compatible - X-SYNC pulley features a 12-tooth design that helps control the chain’s lateral movement - X-HORIZON “straight parallelogram” design limits all movement to the horizontal axis, which makes ghost shifting impossible while also reducing shift force - ROLLER BEARING CLUTCH’s one-way roller clutch controls chain tension for consistent shifting - Cage Lock technology makes for fast wheel changes or chain installation - Available in Short: 11-26 through 11-28 / Medium: 11-26 through 11-36 / Long 11-32 through 10-42 cage lengths Short Cage: Chain Wrap Capacity (teeth): 18 teeth Largest Cog: 28 Weight: 250 g Medium Cage: Chain Wrap Capacity (teeth): 26 teeth Largest Cog: 36 Weight: 262 g Long Cage: Chain Wrap Capacity (teeth): 32 teeth Largest Cog: 42 Weight: 271 g
Shimano XT FD-M8070 Di2 Front Derailleurs - Accurate and stable shifting in any condition - Instant response - Customized shift speed within Multi-shift - Powerful shifting - Increased power vs. mechanical - Smart and efficient gear selection with Shimano Synchro Shift - Single lever operation - Rider-programmable shift mapping - Series : Shimano Deore XT - Swing Action: Down Swing - Top Gear Teeth: 38-34T - Chain Line: 48.8 - Chain Stay Angle: 66-69 - Average Weight: 134 grams
Eleven speeds to rule all the trails. That is the X1 Rear Derailleur's motto. It packs a massive amount of technology into its compact, lightweight aluminum body. This 11-speed gear changer uses a “horizontal parallelogram” design that limits all movement to the horizontal axis, reducing the force it takes to shift. The Type 2 clutch is brilliant. This self-lubricating, one-way roller clutch controls your chain tension to eliminate chain slap and give you smooth, consistent shifts over any terrain. For quicker, smoother, more exact shifting, the large upper pulley's offset design maintains a consistent chain gap across all gears.
SRAM's X01 Rear Derailleur packs a massive amount of technology into its compact, lightweight body. This 11-speed gear changer uses a “horizontal parallelogram” design that limits all movement to the horizontal axis, reducing the force it takes to shift. The Type 2 clutch is brilliant. This self-lubricating, one-way roller clutch controls your chain tension to eliminate chain slap and give you smooth, consistent shifts over any terrain. For quicker, smoother, more exact shifting, the large upper pulley's offset design maintains a consistent chain gap across all gears.
$214.00 - $225.00
Elevating the shift, expanding the capable, the X01 Eagle derailleur features an updated cage architecture to provide better chain management than ever. The X01 Eagle rear derailleur works with the new 10-52T cassettes and is backward-compatible with 10-50T options, as well. - Updated cage provides better chain retention and more precise shifts - Backward-compatible design works with 10-50T and 10-52T cassettes
The new Super Record 12x2 Speed mechanical front derailleur: lightness, design, fluidity, and effectiveness. The new Super Record 12x2 Speed mechanical front derailleur introduces many new techniques, starting with the leverage systems designed to speed up derailings. Less effort is needed to shift owing to the split front connecting rod, which prevents contact with the travel limit screw. Whilst the shape of the inner cage plate is engineered to guarantee maximum readiness for upshifting, the external monolith body in carbon fiber has been shaped to enhance the efficiency of the chain movement when going uphill and the readiness and fluidity in descent. The aesthetic impact of the component is consistent with the rest of the Super Record groupset due to the use of unidirectional carbon fiber and titanium stop screws. Micro-adjustments to the front derailleur position, which can be activated by the controls, help to prevent any contact with the chain, even in the case of maximum crossover. As regards compatibility, the new Super Record 12x2 Speed front derailleur allows the use of hoods measuring up to 32 mm thanks to the new upper connector rod and the double fixing position of the control cable.
Page 1 of 5 Next page