Designed with the Surly Pack Rat frame, this fork is built with front cargo caryying in mind. It’s made from 4130 CroMoly steel and features mid-blade eyelets for mounting a Surly 8- or 24-pack rack (among others). This lugged and brazed fork also includes fender eyelets at the dropouts, internal routing for generator hubs, and cantilever brake pivots. - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets for mounting a front rack - Fender eyelets at the dropout - Internal routing for generator hubs - Cantilever/Linear Pull brake mounts - 9mm x 100mm quick-release dropouts - Max tire clearance: 650B x 48c
- Slides over upper fork legs to prevent frame/fork contact - Works on 35mm boXXers only
The No.7 road fork features full unidirectional carbon construction, available in tapered or straight steerer tubes. - Full unidirectional carbon construction - Mid-Reach Caliper rim brake compatible - 35c max recommended tire size - ASTM Condition 2 - For off-road riding and jumps less than 12" - No rider weight limit - 5 year Whisky warranty - Accommodates road plus tires - Fender mounts
- Forged dropouts with eyelets, straight-gauge oval tapered blades - Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing - 85mm threaded section - Fits up to 30c tires - Axle to Crown Length: 382 mm - Brake Mount (Fork): Long Reach Caliper (55mm - 73mm) - Crown Race: 27 - Front Axle: 9mm x 100mm - Material: Steel - Offset: 50mm - S.H.I.S. Stem Clamp Diameter: 25.4-24tpi Quill - Steerer Type: Straight - Weight: 839g, 876g, 907g - Wheel Size: 27"
The Whisky No.7 RD thru-axle fork is a thoroughly modern road fork for road bikes with tapered steerer tubes. It features a 12mm thru-axle for precise handling, clearance for high-volume road tires, and clean internal cable routing. Flat mount brake capability offers clean caliper fitment and backwards compatality with post mount brakes using adaptors.
There is beauty in simplicity and it's hard to argue with the simplicity of an unsuspended mountain bike. Despite its uncomplicated nature, ENVE's rigid Mountain Fork is loaded with unique features such as a removable fender, disc brake hose clip, and reversible axle inserts to fine tune the rake of the fork to match your ride preference and application. - Material: Carbon Fiber - Steerer Tube Length: 300mm - Rake: 44, 52 Adjustable - Axle to Crown: 470mm - Brake: Disc - Max Rotor Size: 180mm - Max Tire Clearance: 3.4-inch - Crown Race Diameter: 1.5-inch - Torque Spec: Steer Tube: 5.5 Nm - Torque Spec: Axle: 8Nm - Weight: 711g (w/ fender), 686g (w/ clasps)
The Long Haul Trucker fork is designed to mount racks and fenders and to haul stuff. Offered in 26? and 700c wheel sizes, the fork’s new crown provides ample clearance for 700c x 50mm tires, and sports threaded eyelets in four locations (dual dropout, midblade and fork crown) to provide more options for mounting stuff, from racks to whatever. Options galore. Curved blades, CroMoly steel. 1-1/8-inch threadless steer tube. - Axle-to-crown: 700c = 390mm - Offset: 45mm - Steerer: 700c (56–64cm frames) = 350mm - Tire Clearance: 700c x 45mm - Weight: 700c = 2.3 lb uncut
Classic 100% chromoly construction and engineered for modern accessories, that's Surly's Long Haul Trucker Disc Fork. Its beautiful curved blades are brazed to a lovely and tough investment-cast crown and dropouts. There are disc-brake mounts and eyelets for fenders and mounts for a standard or low-rider rack. Plus, it boasts a tough powdercoat finish that's tres chic. - 100% CroMoly steel construction, curved blades, powdercoated - Extensive mounting options with threaded eyelets in four locations: double eyelet dropouts, mid-blade, and a pair drilled into the fork crown - 51mm IS disc brake mount - 700c has clearance for a 45mm tire
Designed for Surly's Krampus frame, this fork has quick-release dropouts spaced at 100mm and clearance for a 3-inch tire on a 50mm rim. To accommodate such big tires it's got a longer axle-to-crown measurement than the Ogre or Karate Monkey forks, making it a perfect rigid fork option for lots of 29ers out there. The Krampus fork's blades were designed and manufactured specifically to play well with the unique forces such a long fork with big tires will encounter, and the steer tube is standard 1-1/8-inch threadless. It has line guides for a disc brake line as well as thru-blade eyelets and Three-Pack bosses on both fork legs. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm - Tire Clearance: 29 x 3" - Weight: 1133g uncut
The Straggler fork is very much like the Cross-Check fork — t's a lugged and brazed CroMoly fork with room for 700c tires up to 50mm wide. Both feature fender and rack mount eyelets at the dropouts, mid-blade threaded rack mounts and threaded eyelets on the sides of the crown for accessories. Both deliver a resilient ride and are finished in black powdercoat. The Straggler fork is equipped with a 51mm I.S. disc caliper mount and no accommodation for rim brakes. - Axle-to-crown: 400mm - Offset: 44mm - Steerer: 300mm, 1-1/8" straight (42-58cm), 350mm, 1-1/8" straight (60-62cm) - Tire Clearance: 50mm (w/o fender) Weight: 2.5 lb (1.15kg) uncut
Designed with the Surly Pack Rat frame, this fork is built with front cargo carrying in mind. It’s made from 4130 CroMoly steel and features mid-blade eyelets for mounting a Surly 8- or 24-pack rack (among others). This lugged and brazed fork also includes fender eyelets at the dropouts, internal routing for generator hubs, and cantilever brake pivots. - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets for mounting a front rack - Fender eyelets at the dropout - Internal routing for generator hubs - Cantilever/Linear Pull brake mounts - 9mm x 100mm quick-release dropouts - Max tire clearance: 26 x 2.0"
The Whisky No.9 RD thru-axle fork is designed from the ground up to offer a modern road fork experience. Big tire clearance, flat mount brake capability, and internal cable routing all add up to a clean look and capable performance. Featuring sleek hidden fender mounts, this fork carries through with Whisky’s promise of refined, versatile performance. - 1-1/4-inch Tapered steerer tube - 12mm thru-axle, 100mm spacing - Designed for flat mount disc brakes - Hidden, removable fender mounts - 700 x 30c max recommended tire size - Includes thru axle and Whisky Parts Co. compression plug
The Cutthroat carbon fork is full of features, ready for any adventure. - Full Carbon fork, tapered steerer - Fits 29 x 3.0" tires - Three-Pack mounts - Crown light mount - Axle to Crown Length: 483 mm - Brake Mount (Fork): Post Mount 160 - Crown Race: 40 - Front Axle: 15mm Thru x 100mm - Wheel Mount Center Offset (mm): 0 - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Steerer Tube Length (mm): 260 mm - Wheel Size: 27.5+ , 29" , 29+ - Rotor Size (Fork): 200 - Maximum Tire Clearance (Fork): 3
The Ogre fork is non-suspension corrected and will run 29-inch as well as 27.5-inch tire options. Made of 4130 CroMoly, it's got 51mm IS disc mounts, removable cantilever pivots, brake-line guides, low-blade threaded barrel bosses and mid-blade eyelets for a rack. This fork is designed to run disc brakes, fenders and a rack simultaneously. It's got two sets of triple bottle mounts, one on each leg. - Axle to Crown Length: 447 mm - Brake Mount: Canti studs, IS Disc Brake 160 - Crown Race: 30 - Front Axle: 9mm x 100mm - Material: Chromoly Steel - Offset: 43 mm - Steerer Type: Straight 1-1/8-inch - Wheel Size: 29-inch, 27.5+ - Powdercoat finish
Now you can update your 2010+ BoXXer Race, Team, RC, R2C2 and World Cup with the Charger Damper Upgrade Kit. The Charger is RockShox’s insanely refined damper, and its sealed construction with an expandable rubber bladder ensures damping consistency, reduces vibration, and is almost 100 grams lighter than the previous BoXXer damper. Adjustment is easy and intuitive, with a single compression adjuster and a beginning stroke rebound adjuster with a factory set Rapid Recovery tune. The internal shim stacks can be re-tuned for light or firm compression and rebound settings. Includes damper, syringe, and suspension fluid.
• Upgrade from crown adjust to remote adjust • Includes PopLoc remote lever (left) and compression damper • Available for Recon Silver, Sektor Silver, XC 32, and Paragon
Ritchey designed their WCS Disc Cross Fork from the ground up to manage the unique stresses that disc brakes and competitive cyclocross racing deliver. • Monocoque construction • Compatible with standard and integrated headsets • Carbon dropouts and disc mount • 440 grams • Blade: Carbon • Crown: Carbon • Steerer: Carbon • Steerer Length: 300mm • Steerer Diameter: 1-1/8" • Rake: 45mm • Blade Shape: Curved • Drop out: Carbon • Crown Diameter: 45mm • Integrated 45 degree crown race • Axle-to-Crown: 395mm • Finish: Matte UD Carbon • Weight: 440g (w/ uncut steerer) • 140 or 160mm rotor compatibility • Brake mount: Disc • Compression plug included
The No.9 CX Flat Mount fork is a light-weight, forward-compatible front-end upgrade, ideal for cyclocross, gravel, or commuting. Featuring the flat mount disc brake standard, easy fender mounts and 12mm thru-axle dropouts to create a refined, clean design that trims considerable weight over previous versions. The fork provides big tire clearance, precise handling and tracking capabilities, and a comfortable ride quality that Whisky forks are known for. - 12mm thru-axle, 100mm spacing - Designed for flat mount disc brakes - Hidden, removable fender mounts - 42mm max recommended tire size - ASTM Condition 2 - For off-road riding and jumps less than 12-inches - Includes thru-axle and Whisky Parts Co. compression plug
The RockShox Pike is like a stealth bomber designed specifically for new-school trail riders. Its new damper rides high in the travel where it’s the plushest. Its industry redefining asymmetric approach to chassis design delivers an unparalleled stiffness to travel to weight ratio that will have other engineers playing catch up for years. The RCT3 Charger 2 Damper with DebonAir air spring delivers increased small bump sensitivity and mid-stroke support. The firm setting has also been re-tuned to better match RockShox rear shocks, with OneLoc compatibility which allows on-the-fly suspension control. - Charger 2 Damper with DebonAir spring - Lighter chassis with signature Pike stiffness - Fast Black coating on the upper tubes provides improved durability and decreased friction - Crown Race: 40mm - Steerer Tube Length: 265mm - Positive Spring: Air - Negative Spring: Air - Wheel Size: 27.5 / 27.5+ - Stanchion Diameter: 35mm - Maximum Tire Width: 81mm - 27.5 x 2.8" maximum tire size
Enduro stages are steeper, longer and meaner than ever before, and Lyrik RC2 is here to humble them. The new Charger 2 RC2 damper offers independent high and low speed compression adjustment to make molehills out of mountains. The new DebonAir air spring reduces friction from every single moving part, improving bump absorption and response under load, and drastically reducing rider fatigue. New, shorter offset options make Lyrik RC2 compatible with the confidence-inspiring (and smile-inducing) machines being dreamed up by bike designers around the world. - 2.8" tire width clearance - Torque Caps compatibility - E-MTB endorsement decal part numbers available - New friction-reducing DebonAir air spring delivers the most responsive forks and rear shocks in RockShox history, maintaining traction in more conditions than ever before - New graphics with a BoXXer Red fork color option - New Charger 2 RC2 damper with independent high- and low-speed compression adjustment, allowing more adjustability than ever before - External rebound damping adjustment
When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.9 Carbon Disc Cyclocross Fork. It eliminates uncomfortable chatter and vibration for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, disc brake mounts, and a stiff, secure thru-axle ensure low weight and precise braking and handling. Plus, fender mount means you'll be bounding out the door on even the rainiest days. It all results in an enhanced riding experience and adds up to performance that you can count on. - Axle to Crown Length: 395mm - Brake Mount: Post Mount 140mm - Crown Race: 40 - Front Axle: 15 x 100mm - Material: Carbon - Maximum Tire Clearance: 45mm - Offset: 45mm - Rotor Size: 185mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length: 300mm - Steerer Type: Tapered - Wheel Size: 700c
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. Their new R-Series forks continue this tradition. FEATURES - Fully redesigned. - Laboratory tested and team proven. - New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance. - All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race. - New, optimized, 4mm dropout shape for grind and peg clearance. - Updated 7075-T6 pre-load bolt - Proven 41-Thermal® processed 4130 chromoly - Legendary lifetime replacement warranty SPECS - 32mm traditional offset - 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)
Fox Racing Shox 36 Float 27.5-inch Performance Elite Series w/Fit4 Damper & 3-Position Lever Adjustment
More than an enduro race fork. Now featuring an EVOL air spring and updated upper tubes for unparalleled small bump sensitivity, the 36 is even smoother than before. The exceptionally strong 36 continues to expand the range of damper and axle options, including Boost and Performance Elite models, that’s made it wildly popular among aggressive trail riders and enduro racers. Performance Elite forks retain the same adjustments, dampers, weight, and 7000 series aluminum upper tubes as Factory Series, but have black anodized upper tubes instead of Genuine Kashima Coat. A Performance Elite graphics package is found on these forks to tie in the black-on-black look. - NEW FLOAT EVOL air spring adds plushness - Back-to-back Men's EWS Championship-winning platform - FIT4 damper - 3-position lever adjustment
Whisky's No.9 RD+ is an all-road fork designed for versatility with abundant tire clearance, up to 700x38c or 650x47c. Hidden and removable fender mounts make this fork all season capable. - 12mm Thru Axle - Flat Mount Disc Brake - Tapered Steerer Tube - 700x38c/650x47c clearance
The Makwa fork is Salsa's fat bike race fork. Lightweight and stripped of extras, its thru-axle design boosts stiffness and aids in solid tracking on the trail. This fork is spec’d on Salsa's 2014 Beargrease bikes, and is also fully compatible with their 2014 Mukluk frames. - Axle-to-Crown Length: 483mm - Brake Type: Disc - Brake Usage F/R: Front - Color: Black - S.H.I.S. Crown Race Diameter: 40 - Fork Rake: 51mm - Front Axle Type: 15mm thru - Front Axle Size: 15 x 171L, TP=1.5, TL=10 - Front Hub Spacing: 142mm - Material: Carbon - S.H.I.S. Clamp Diameter: 28.6 - Steerer Tube Length: 260mm - Steerer Type: Tapered - Weight: 720g - Compatible with all 26 x 4.0–5.0" tires and 29+ tires
Designed around Surly's updated Krampus frame (but also employed on the updated Karate Monkey frames as well), this fork has 15mm thru-axle dropouts spaced at 110mm and clearance for up to a 29 x 3.0-inch tire. To accommodate such big tires it's got a longer axle-to-crown measurement than our Ogre or Karate Monkey forks, making it a perfect rigid fork option for lots of 29ers out there. The Krampus fork's blades were designed and manufactured specifically to play well with the unique forces such a long fork with big tires will encounter, and the steer tube is standard 1-1/8-inch threadless. It has line guides for a disc brake line as well as thru-blade eyelets and Three-Pack bosses on both fork legs. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm - Tire Clearance: 29 x 3.0-inch - Weight: 1180g uncut
The RockShox Paragon suspension fork combines the premium level of performance and features mountain bikers have come to expect from RockShox, now with a purpose-built 700c trekking design. Its lightweight, infinitely tunable Solo Air spring and Motion Control damper allow the rider to fine tune the fork for those cherished stretches of either path or pavement. Paragon’s thoughtful design combines a unique light mount on the fork brace and fender and rim/disc specific mounts integrated into the fork legs. Even the dynamo wiring runs under a sleek integrated cover up the fork leg, keeping it safe and concealed. Paragon makes trekking both smart and simple. - Standard with Motion Control damping featuring low speed compression adjustment - Integrated mounts for fenders - Unique light integration at the fork brace - Integrated wiring and cable management for running a dynamo - Crown Race: 30mm - Offset: 46mm - Steerer Tube Length: 262mm - Positive Spring: Air - Negative Spring: Air - External Adjustments: Rebound Damping , Low Speed Compression Damping - Maximum Tire Width: 45mm
Ritchey's history with cyclocross runs long and deep, sort of like the mud sections of your favorite 'cross course. The WCS Carbon Cross Canty Fork is designed for the rigors of cyclocross and those who demand traditional canti brakes. Decades of experience between the course tape, and building the bikes and components designed to win, inform the performance and design details of this fork. It employs a monocoque construction, and it's compatible with standard and integrated headsets. - Blade: Carbon - Crown: Carbon - Steerer: Carbon - Steerer Length: 300mm - Steerer Diameter: 1-1/8” - Rake: 45mm - Blade Shape: Curved - Drop out: Carbon - Crown Diameter: 45mm - Integrated 45-degree crown race - Axle-to-Crown: 395mm - Finish: Matte UD carbon - Weight: 448g (w/ uncut steerer) - Brake mount: Canti - Compression plug included
The Öhlins RXF 36 fork drafts off of the success of the 34, while bringing more stiffness and room for bigger tires. It operates off of a three-chamber air spring design (two positive and one negative), and it utilizes proprietary TTX damping technology. Combined, this allows both parallel and separated oil flow that controls the overall pressure levels. In a practical sense, this means that the fork is guaranteed to remain high in the travel, while also ensuring smoothness and predictable bump absorption throughout the entire ride. The shape of the spring force is also capable of being adjusted, which allows riders more fine-tuning options for preferences like increased sensitivity without the threat of bottoming out. Öhlins has increased the stanchions to 36mm and upped the spacing to 110mm with an ultra-stiff two-piece alloy crown design. This means that it'll experience less flex for more tire control, while also trimming down on some weight. - Features a three-chamber air spring, with two positive chambers and one negative, allowing for an offset of spring pressure that perfectly mates stiffness with a plush, responsive ride quality. The shape of the spring curve can also be adjusted to increase sensitivity without bottoming out. - TTX (Twin Tube) damping enables separated oil flow, so the fork will always provide the perfect degree of pressure. This way, it stays smooth and high in the travel without compromising bump absorption, traction, or stability. - A tapered alloy steerer and high alloy two-piece crown ensure high stiffness and tire control with less chassis flex and chassis hysteresis. 36mm stanchions with 46mm offset for party time on the trail. - 150 and 170mm travel options available. - 15x110mm spacing.
Yari brings Lyrik’s acclaimed look and proven features – 35mm chassis, Fast Black upper tubes and DebonAir air spring – to a wider audience. The Motion Control damper features Rapid Recovery rebound, and its high-speed compression circuit is tuned to match the feeling of the Charger damper. - NEW "E-MTB" decal for Diffusion Black options - Chassis derived from Lyrik - Motion Control damping