Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Other

$9.99
All-City replacement bolts and adjustment springs for the Hennepin Bridge and Space Horse dropouts.
- Sold as a pair; two bolts and two springs
- M4x0.7mm thread
- Length: 45mm

$10.00
Consider this the cherry on top of your sundae. Pull the whole thing together with an All-City top cap.
- Includes star nut

$12.00
Snap-on brake cable guides for bikes that don't have any.
- Steel cable housing guide for 1-1/8" top tubes
- Snaps on; no bolts
- Set of 3 clamps

$15.00
Tired of losing your bar end plugs? Seeking a more secure solution that also venerates your favorite little bike company from Minneapolis?
Well, boy howdy do we have just the thing...

$15.00
The All-City Master Dropout is a sliding dropout system consisting of replaceable dropout plates and fixing hardware. Designed for use with 12mm thru-axles and flat-mount brakes, it is compatible only with select All-City models.
- Allows riders to convert from a geared to single-speed setup or vice-versa
- Compatible only with select All-City models
- No additional chain tension adjustment required
- Non-Drive Side, use with multi-speed and single-speed setups
- Plate and fixing hardware included
- Compatible with Flat Mount disc brakes

$25.00
Pretty up your ride and secure your seatpost with the All-City Shot Collar seat clamp.
- Laser-etched All-City logo
- Aluminum body with stainless steel hardware

$35.00
The All-City Master Dropout is a sliding dropout system consisting of replaceable dropout plates and fixing hardware. Designed for use with 12mm thru-axles and flat-mount brakes, it is compatible only with select All-City models.
- Allows riders to convert from a geared to single-speed setup or vice-versa
- Compatible only with select All-City models
- No additional chain tension adjustment required
- Drive Side, for multi-speed set-ups
- Plate w/ hanger and fixing hardware included

$35.00
The All-City Master Dropout is a sliding dropout system consisting of replaceable dropout plates and fixing hardware. Designed for use with 12mm thru-axles and flat-mount brakes, it is compatible only with select All-City models.
- Allows riders to convert from a geared to single-speed setup or vice-versa
- Compatible only with select All-City models
- No additional chain tension adjustment required
- Drive Side, for single-speed set-ups
- Plate and fixing hardware included
- Compatible with 12mm thru-axle

$35.00
EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount.
- For mounting the V3 power inside the seat tube using the water bottle screws
- Not compatible with the V2 Power Unit

$85.00
- Required for use on carbon frames with carbon front derailleur braze on mounts
- Compatible with all Campagnolo EPS front derailleurs
- Increases the stiffness of carbon front derailleur braze-on mounts to handle the increase torque of EPS front derailleurs

$1.00
Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit.
- Composite construction

$9.00
Installation of air volume reducers for Cane Creek shocks make the spring rate more progressive.
- Spacers can be cut to fine-tune spring curve

$18.00
Cane Creek's Thud Glove protects the moving parts of your Thud Buster seatpost from dirt and weather. Available in both short- and long-travel models.

$130.00
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability.
- Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks
- Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP
- Compatible with Fox coil shocks with required spring clip adaptor

$24.00
• Designed for flat-sided tubes up to 23mm thick
• Firm spring prevents movement while riding
• Two bracket options to better fit small and large frames

$59.99
The all new Crank Brothers Highline remote kit.
- Universal mounting system: top/bottom & left/right
- Single bolt hinge locking system
- Infinite spherical adjustment
- Compatible with: Highline and other cable-actuated dropper seatposts

$13.49
- Specially shaped composite material helps prevent chain derailment when shifting to inner ring
- Split clamp design mounts to specific seat tube diameters, eliminating the need for a metal fitment clamp

$24.99
Dimension Stem Column Adaptors
- Total quill length 180mm
- Measurement from minimum insertion to top of steerer adaptor is 118mm
- Alloy
- Quill insertion diameter: 1-inch

$20.00
A seatpost retention plug that holds an electronic shifting system battery securely inside ENVE carbon seatposts. Electronic shifting is the gold standard and more bikes are coming equipped with these groups. Housing the battery into the seatpost is an elegant solution and a good use of space. Available in 25.4, 27.2, and 30.9/31.6mm sizes, these plugs are designed to provide excellent battery retention and interface perfectly with ENVE carbon seatposts.

$30.00
What It Is
Replacement hardware for ENVE carbon fiber seatposts.
Who It's For
Folks who need additional hardware for their ENVE seatposts.
Why We Made It
We get calls all the time for replacement hardware, so we made a little kit to make it easy for everyone.

$8.99
Keep adhesives off your bike!This is the finishing tape included in our RCT Wrap Kits! If you remove the protective backing and feel the material it feels exactly the same on both sides. There are no adhesives! If you touch it to itself you have just a few seconds to peel it away before it starts to bond. It bonds to itself, but not to your bike or to your components. No more cleanups. No more nasty glue stuck all over your bike or products.
Page 1 of 20
Next page