Filter By:
- Parts & Accessories (63)
- Pedals (196)
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Pedals

$80.00
There’s no need to choose between clipless performance and platform versatility with iSSi's Flip II pedals. Go clipless on the commute or sport clogs on campus.
- Flip II: 56.5mm spindle length
- Wear 2-bolt style cycling shoes or casual flat shoes
- Compatible with iSSi, Shimano SPD, and Wellgo 98A cleats
- Chromoly spindle, ED-coated
- Standard 15mm wrench flats as well as 8mm hex broach
- Black chrome hardware
- Adjustable spring tension
- 4° cleat float
- 14.6° angle of release
- Bushing/sealed bearing combination for low-maintenance durability
- Pedal Body Material: Aluminum
- Pedal Spindle: 9/16-inch

$125.00
iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. With triple-sealed cartridge bearings and durable chromoly spindles, these pedals will spin smoothly for countless rides. Plus, four degrees of float helps your knees track naturally during every crank revolution.

$25.00
Xpedo XPR cleat set for R-FORCE 6 is an SPD style cleat specifically designed for 3-hole road shoes.
- Weight: 135g per set with hardware
- Float: 6°

$17.10
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.

$279.99
Whether gunning for the podium or just wanting to finish strong, the Speedplay Aero road pedal is aerodynamically engineered to defy wind and boost speed with less effort. The unique 3-axis adjustability allows you to dial in your cleat positioning, micro-adjust your float up to 15 degrees, and decrease your stack height for the most aerodynamic fit on your bike.
Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics.
By integrating Speedplay's advanced pedal platform into Aero's streamlined design, a pedal profile is created that minimizes drag, helping you achieve faster finishes and shattered PRs.
- Weight: 224g (per pedal pair)
- Spindle Material: Stainless Steel
- Spindle Length: 53mm
- Float: Fixed-15º Micro-Adjustable
- Cornering Angle: 39º
- Bearing: Sealed

$149.99
The exceptional comfort and versatility of the Speedplay Comp road pedal derive from its confidence-inspiring and stable platform, offering both value and performance mile after mile for cyclists of all levels. Precise engagement, effortless release, and dual-sided entry with the Easy Tension Cleat deliver ease of use and confidence to the rider.
Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics.
Versatile performance defines the advanced Speedplay system. Utilizing this innovative platform, Comp's confident engagement and stable platform provide benefits to riders at every level.
- Weight: 224g (per pedal pair)
- Spindle Material: Chromoly
- Spindle Length: 53mm
- Float: 5 to 15º Micro-Adjustable
- Cornering Angle: 37º
- Bearing: Sealed

$449.99
The Speedplay Nano is a featherweight, dual-sided road pedal that lives up to the demands of sprint finishes, categorized climbs, and tough training sessions. The mix of premium titanium and carbon fiber materials creates a lightweight but strong pedal that will hold up and deliver speed on the breakaway. The integrated cleat system with 3-axis adjustability allows you to precisely dial in your fit for optimized biometrics and increased power transfer.
Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimze fit and enhance performace through better biomechanics.
Designed with the same level of focus and dedication it takes to earn a spot on the podium, Nano is a purpose-built, ultralight pedal that utilizes the proven Speedplay platform to offer every advantage come race-day.
- Weight: 168g (per pedal pair)
- Spindle Material: Titanium
- Spindle Length: 53mm
- Float: Fixed-15º Micro-Adjustable
- Cornering Angle: 37º
- Bearing: Sealed

$20.00
VP's Grind Pedals meet the needs of hard-core riders who want a slick and durable set of pedals, and they also work great for anyone who likes stable and comfortable platforms. The Grinds have versatile good looks and feature a thin profile, durable 1-piece nylon bodies with grip pins, boron-steel axles and oversize inboard bearings.
- 380 grams
- 9/16" axles

$22.00
- The ATAC 13/17° cleat works with all TIME mountain pedals.
- Included with all mountain pedal models numbered "6" and higher
- Release angles of 13 degrees or 17 degrees depending on how the cleat is set up on the shoe
- Compatible with all two-hole cycling shoes.

$106.00
- Built with an aluminum body and oversized axle to handle the roughest trail conditions and biggest descents.
- TIME's famous easy entry and exit system allows riders to easily put a foot down when needed and clip back in fast.
- The open, self-cleaning design keeps the pedal clean so its function is not compromised by dirt, debris, or mud.
Specs:
- Pedal Material: Aluminum
- Pedal Weight: 238g
- Cleat Compatibility: ATAC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16"

$29.99
Replacement cleats for RXS pedals, featuring "Cafe" profiling, which means that when you walk into your local coffee shop for a mid-ride refreshment, you don't risk slipping and falling on the tile floor.

$125.00
- Large pedal platform
- Lower platform height for pedaling stability
- Robust retention claws provide smooth engagement and release
- Customize the entry and release tension settings
- Strong, durable chrome-moly spindle with 8 mm hex wrench mount
- Sealed mechanism
- SM-SH51 Cleat included
- 1.0 mm cleat spacer included
- Binding: Dual sided
- Cartridge axle
- Cleat retention adjuster
- Average weight: 342g
- Optional cleat: SM-SH56
- Pedal Type: Off-Road (SPD)

$130.00
- Wide pedal-to-shoe contact
- Lower platform height for pedaling stability
- Integrated cage increases stability and control when not clipped in and protects binding mechanism against impacts
- Robust retention claws provide smooth engagement and release
- Customize the entry and release tension settings
- Strong, durable chrome-molly spindle with 8 mm hex wrench mount
- Sealed mechanism
- 1.0 mm cleat spacer included
- Binding Dual sided
- SM-SH51 Cleat included
- Cleat retention adjuster
- Integrated cage
- Cartridge axle
- Average weight: 438g
- Optional cleat: SM-SH56
- Pedal Type: Off-Road (SPD)

$280.00
- Excellent Pedaling Efficiency
- Optimized Balance Of Weight And Rigidity
- Injection Molded Carbon Composite Body
- Hollow Cleat Bolt
- Efficient Power Transfer
- High Stability
- Extra-Wide Platform
- Efficient Power Transfer/Durability
- Reduces Flex And Pedal Body Wear
- Stainless Steel Body Plate
- Excellent Pedaling Efficiency
- Smooth Rotation
- 2-Ball Bearing, 1-Wide Roller Bushing
- Reliable Durability Performance
- Stable And Uniform Load Distribution
- Wide Bearing Placement
- Rider Tune
- Customize The Entry And Release Tension Settings
- Adjustable Entry And Release Tension Settings
- Shimano 3-Year Limited Warranty
- Average Weight: 224g
- Shimano SPD-SL cleats included
- Standard (52mm)
- Wide (56mm)

$80.00
PD-EH500 pedals
FEATURE
- One side SPD, the other side flat
- Light action binding makes frequent stepping-in & out easier
- Better grip on flat side for wet condition
BENEFIT
- Convenient road touring pedal
- Optimized for urban riding
- Multi-condition
- Best match with CT or MT shoes

$80.00
These versatile pedals feature adjustable Shimano SPD bindings on one side and standard cages on the other: the perfect combination for riders who ride with cleated cycling shoes and also with regular shoes. With sealed bearings and chromoly axles, the M324s are durable and practical all-around pedals.
- Weight: 533 grams (pair)

$50.00
Shimano's M520s are affordable clipless pedals that are easy to enter and exit, and built to last. They boast dual-sided Shimano SPD bindings, which make them perfect for mountain bikers or roadies who prefer wearing walkable shoes with recessed cleats. The bindings are adjustable for dialing in the perfect entry and exit tension, and they have an open, mud-shedding design that prevents clogging. Chromoly axles and sealed bearings add tons of durability.
- 380 grams (pair)

$85.00
Shimano's M540s are race-ready clipless pedals that don't require a team budget. These rugged, light beauties feature dual-sided Shimano SPD bindings that are easy to enter and exit and deliver excellent power transfer and maneuverability. The bindings are adjustable for dialing in the perfect tension and these sweet pedals have an open mud-shedding design to prevent clogging. Plus, the M540s are built to last with chromoly axles and sealed-cartridge bearings.
- 352 grams (pair)

$100.00
Shimano's PD-R550 SPD-SL Pedals offer wide, stable platforms for great support and stability when you're out on the road. An extra-wide platform maximizes power transfer. Durable stainless steel tread plates reduce flex and pedal body wear. Wide bearing placement provides uniform load distribution for miles and miles of riding.
- 310 grams (pair)

$150.00
PD-R7000 NEW
FEATURE
- Carbon fiber reinforced resin pedal body
- Wide contact area
- 265g/pr (25g/pr lighter than PD-5800)
BENEFIT
- Optimum power transfer
- Lightweight
- Aerodynamic image
- Color: CFRP
- Average weight: 265 g
- Road clearance: 31°
- Binding: Single Sided
- Cleat included: SM-SH11
- Optional cleat: SM-SH10 / SM-SH12
- Pedal Type: Road
- Reflector: SM-PD65

$31.00
Shimano's SPD-SL cleats are perfect for all your SPD-SL-compatible pedals. Available in three models to suit your ergonomic needs, with fixed/0-degree, 2-degree, and 6-degree options. These cleats come as a pair and include all required mounting hardware. They are compatible with three-bolt cycling shoes.
- 0° Float/fixed type = SM-SH10
- 2° Float/front center pivoting type = SM-SH12
- 6° Float = SM-SH11

$200.00
Shimano Ultegra R8000 pedals.
- Pro-level performance and lightweight for the enthusiast
- The legacy of Shimano design, quality and performance
- Carbon-composite body
- Extra-wide platform for a more efficient transfer of power
- Adjustable entry and release tension settings
- 4mm longer axle available
- Low stack height
- 0.7mm lower than PD-6800
- Model Number: PD-R8000
- Series: Ultegra
- Pedal System: SPD-SL
- Average Weight: 248 grams

$180.00
- Enhanced pedal-to-shoe contact area with mud-shedding profile
- Wide bearing placement for rigidity and uniform load distribution
- Slimmer, weight-optimized axle with 2 length options
- Low platform height for pedaling stability
- Lightweight, 310 g (11 oz.) per pair
- Slimmer axle housing better sheds mud and debris
- Binding Dual Sided
- Cartridge axle
- SM-SH51 Cleat included
- Cleat retention adjuster
- Offset binding
- Sealed mechanism
- Average weight: 310g (Short axle type)
- Optional cleat: SM-SH56
- Pedal Type: Off-Road (SPD)
- 3 mm shorter axle version (52mm)
- 1.0 mm cleat spacer included

$54.99
Here For The Party
A party's just not a party until Chester shows up. This burly nylon-composite pedal is big on features, small on price, and fully ready to tear up some trail. A concave body, replaceable traction pins, and a cro-mo sealed axle are all representing.
The Full Meal Deal
A slim yet durable nylon-composite body is accented with a concave design, built-in traction treads and 8 replaceable traction pins per side.
Not Just Another Axle
Made to stand up to punishment, the durable sealed cro-mo axle rolls on a completely serviceable bearing + bushing set-up.
Bling For Your Bike
No build is complete without sick looking color-Coordinated pedals. Chester pedals come in multiple vibrant colors to choose from.
Specs
- Platform Height: 18.4mm
- # of Pins: 16 SHCS hex traction pins per pedal (8 per side)
- Platform L x W: 101 x 110mm
- Axle Material: Chromoly Steel
- Body Material: Nylon Composite
- Material: Nylon Composite
- Weight: 360g

$39.99
The RaceFace Ride pedal features a slim nylon-composite platform, and offers a concave and lightweight design for legitimate performance.
- Molded traction pins give you all the grip you need without risk of damaging your shoes or shins
- Durable Cro-Mo steel axle features a standard 9/16” pedal thread and serviceable internal parts
- 9/16"

$139.50
The OneUp Aluminum Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading hexagonal steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 365g, the OneUp Aluminum Pedals won't slow you down on the climbs.
Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedals sitting in the natural arch of your foot. The ultra-thin design (only 8mm at the leading edge) gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. Clip Less, Ride More.
When it s finally time to service your bearings, the unique cassette tool lock ring system makes re-greasing the bearings exceptionally fast and easy.
FEATURES
- 10 rear loading custom hexagonal removable pins per side for maximum grip
- Ultra thin leading edge chamfered design to deflect off any obstacle
- Fully sealed and serviceable design with built in bearing extractor
- Wide platform design for increased stability
- Contoured shape provides ultimate connected feel
SPECS
- Weight: 365g
- Platform Size: 115x105mm
- # of Pins: 10 per side
- Axle Material: Chromoly steel
- Height: 8.3-12mm
- Pin to Axle distance: 112mm
- Color: Black, Green, Grey, Blue, Orange, Red, Purple, OilSlick
- Body Material: 6061-T6 Aluminum
COMPATIBILITY
- Currently, due to the deep counterbore of the crank arms, these pedals are not compatible with SRAM Carbon cranks.
- These pedals are not compatible with crank boots without modification to the crank boots. We recommend removing crankboots before installation.

$68.50
The OneUp Composite Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, they won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedal sitting in the natural arch of your foot. The thin leading edge chamfered design gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle.
FEATURES
- 10 rear loading Steel pins / side, with Nyloc nuts
- DU plus cartridge bearing axle system
- Thin leading edge chamfered design to deflect off obstacles
- Wide platform design for increased stability
- Contoured shape provides ultimate connected feel
SPECS
- Weight: 355g
- Platform Size: 115x105mm
- # of Pins: 10 per side
- Axle Material: Black chromoly steel
- Height: 18.5mm (13.3 at the leading edge)
- Pin to Axle distance: 108mm
- Color: Stealth Black, Red, Blue, Orange
- Body Material: Nylon Composite

$13.99 - $16.99
One of the most successful and popular pedals, and for good reason with its extremely simple, lightweight, inexpensive and famously durable plastic-bodied design. Often duplicated but never replicated.
- High-strength plastic composite

$23.00
The MADE by LOOK KEO standard is recognized in the cycling world for its minimal weight and compact design of the cleat and pedal combo. Of course, compatible with all pedals on the market, their memory positioner is a major advantage when changing your cleats. Their principle and use are the same as the DELTA cleat standard; engagement and disengagement remain efficient and reassuring.
- Use: Road
- Material: Polyamide + PTFE
- Lateral adjustment: 4mm
- Longitudinal adjustment: 12mm
- Weight (pair + fasteners): 68g

$28.00
The KEO GRIP cleats closely resemble the KEO CLEAT model, yet they boast the added feature of a TPU layer on the shoe side which prevents the risk of cleats sliding on carbon soles. Their anti-slip surface on the pedal side offers extra safety and stability when walking.
- Use: Road
- Material: Polyamide + TPU
- Lateral adjustment: 4mm
- Longitudinal adjustment: 9mm
- Weight (pair + fasteners): 68g

$55.00
HT's PA03A pedals. Large platform, sealed bearings, and a concave shape.
- Platform 107 X 105 X 18mm
- Nylon-reinforced composite body
- 10 replaceable pins per side
- 9/16"

$37.00
- Slim and lightweight nylon composite body built tough for DH and enduro riding
- Concave shape and 9 molded pins for maximum grip
- Durable chromoly steel spindle
- Sealed cartridge bearing for smooth long-lasting performance
- Weight: 350g

$52.50
- Slim and lightweight nylon composite body built tough for DH and enduro riding
- Concave shape and 9 replaceable pins per side for secure foot engagement
- Durable chromoly steel spindle
- Sealed cartridge bearing for smooth long-lasting performance
- Weight: 380g

$80.00
- Lightweight, strong composite cage body.
- CNC-machined chromoly steel axle.
- LSL and Sealed bearings for smoother pedaling and durability.
- Binding adjustable tension (80-180 kgf-cm).

$85.00
Lightweight, reliable XC mountain bike pedals with double sided SPD compatible engagement, sealed cartridge bearings and adjustable release tension.
- Dual-side Shimano SPD compatible engagement.
- Widely adjustable release tension.
- Lightweight CNC machined aluminum body.
- Stout Cr-Mo spindle.
- Sealed bearings.
- Optimal mud shedding cage design.
- Includes cleats and mounting hardware.

$1,199.99
Rally XC200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes.
- Advanced Cycling Dynamics—In addition to total power and cadence, Rally XC200 measures much more. These metrics help you identify your strengths and weaknesses, so you can work to improve.
- Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power.
- Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness.
- Power Phase—Get a clear look at where you're producing power in the pedal stroke.
- Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal.
- Cleat Compatibility—For a comfortable ride, these pedals are designed to fit your favorite Shimano SPD cleats.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4)
- Battery life: up to 120 hours (with LR44 battery type)
- Weight: 316g
- Water resistance: IPX7
- Max. rider weight: 105kg
- Accuracy: +/- 1.0%
- Cleat type: Shimano SPD
- Q-factor: 53/55mm with supplied spacing washer
- Stack height: 13.5mm
- Field calibration
- Adjustable release tension
- Garmin Connect
- Measurement location: Spindle
- Communication: ANT+ and Bluetooth
In the Box:
- Rally XC200 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation

$52.00
Pedal built with quality materials. It features a strong, aluminum body, and a Cr-Mo axle on a slimline dual bearing system.
- LSL bushing & sealed bearings
- Tension gauge
- Aluminum Body with CNC-Machined chromoly spindle
- Includes E-RSL1 SPD-SL Style Cleats and mounting hardware

$9.00
Dimension Nylon Basic Toe Straps
-Durable metal buckle
-Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution must be used to keep the strap tail out of the wheel)
- 450mm

$37.00
Dimension Combo Pedal Sets are assembled with size large toe clips, straps and reflectors.
- Pedal Body Material: Aluminum
- Pedal Spindle: 9/16-inch
- Pedal Type: Toe Clip Compatible
- Spindle Material: Chromoly Steel
- Weight: 520g

$16.00
Dimension Mountain Basic Pedals.
- Molded nylon 1-piece, caged-type pedal with reflectors
- Accepts toe clips
- Hang tag packaging
- Pedal Body Material: Plastic
- Pedal Spindle: 9/16-inch or 1/2-inch
- Pedal Type: Toe Clip Compatible
- Spindle Material: Chromoly Steel
- Weight: 330g

$119.99
Black Kat pedals are built around a larger double sealed bearing sytem, With a larger platform, thinner body and over all lighter appeal, these pedals bring great value. By utilizing a concave shape to the platform, rounded edges at the spindle, traction grooves throughout and included an additional pin kit with every purchase.
- Extruded and CNC Machined 6061 T6 Aluminum
- 100mm x 100mm platform
- Concave body
- Fully Serviceable DU Bushing and Double Micro Sealed Bearing System
- Intended Use: Downhill, FR/DJ, Enduro, All Mountain
- Allen bolt style pins
- Additional Allen Pin kit included

$179.99
TMAC Signature Tyler McCaul Pedal. With over two years of development features one of the most concave designs on the market. Not only does the TMAC pedal give precise control, the non-offset design provides more contact with the pedal with equal weight distribution in front and back of the pedal spindle. This non-offset design feels like the largest pedal ever made at a mere 110mm x 105mm footprint.

$20.00
Everything you need to keep those Crank Bros pedals spinning freely is found in their Pedal Rebuild Kit. Each kit includes parts and instruction to rebuild one pair of Crank Bros. pedals.

$147.00
At 110 x 105MM, Chromag's Scarab pedals feature one of the widest platforms available, yet thanks to the thin profile and chamfered corners, it has great clearance. Chromag's proprietary extrusion and machined design provides an ultra thin true-concave profile that is only 13mm at platform center. Custom traction pins are made of hardened steel and feature two height options via the removable washer. A shear line reduces pedal damage when the pins are struck. Each pedal features 42 placement options for the ultimate customization. • Low profile 13mm at platform center • True concave design • Custom adjustable height pin • 42 pin placement options • 430g / pair

$13.99
Squatch platform pedals have a low-profile, nylon construction and molded traction studs that are easier on the shin in the event of a crash or pedal slip.
- EPB bearing system
- Spindle size: 9/16-inch

$40.00
Replace worn-out spindles or customize your stance width, with these kits for iSSi Road pedals.
- Chromoly spindles
- Sealed cartridge bearing and bushing in an alloy cartridge
- Compatible only with iSSi Road pedals
- Installs with iSSi Road spindle tool (TL5499)
- Pedal Spindle: 9/16"
- Spindle Material: Chromoly Steel

$50.00
Replace or overhaul iSSi pedals with Bushing & Bearing Spindles with these handy kits, or customize your stance width with longer spindle options.
Includes:
- iSSi chromoly spindles
- Sealed cartridge outer bearings
- Inner Bushings
- Spindle nuts
- Seals
- iSSi-branded end caps

$17.00
- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit.
- Includes 36 steel pins and 2mm spacers to replace both sides of two pedals
- The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.

$54.95
e*thirteen's Base pedal features a durable composite pedal body and 22 traction pins.
- Durable composite pedal body
- 22 traction pins
- 9/16"

$119.00
The Baldwin offers the best of both worlds, bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support.
- Weight: 332g CrMo
- Body: 60661 CNC AL
- Spindle: Cromoly
- Bearings: 3 Cartridge
- Springs: SWP
- Cleat: XPEDO XPT (6° Float)

$189.00
The Baldwin offers the best of both worlds bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support.
- Weight: 292g Ti
- Body: 60661 CNC AL
- Spindle: Titanium
- Bearings: 3 Cartridge
- Springs: SWP
- Cleat: XPEDO XPT (6° Float)
*Titanium spindles have 180lbs weight limit.

$109.00
The CXR is the ultimate performance cyclocross pedal for riders looking for lightweight, durability, and strength. The Posi-Lock retention system allows superior adjustability and easy rapid engagement action. Specially designed larger front retention claw maximizes positive entry in wet and muddy conditions. Cromoly spindles are paired with three precision cartridge bearings for minimal maintenance.
- Weight: 295g
- Body: 6061 Forged Aluminum
- Spindle: Cromoly
- Bearings: 3 Cartridge
- Springs: SWP
- Cleat: XPEDO XPT (6° Float)

$169.00
Xpedo's designers went back to the drawing board for the GFX to create a fresh new design to meet the demands of the evolving downhill racing styles. The latitude entry system allows rapid engagement in any condition, positioning the front claw upwards for intuitive, seamless contact with the pedal. The Posi-Fit retention system is fully adjustable for fine-tuning the entry and release. The low-profile 6061 CNC body with adjustable height pins provide traction and support with any style of shoes. Tapered cromoly spindles roll on three precision cartridge bearings for easy maintenance. Wider Q-factor allows ample clearance between shoe and crankarm.
- Weight: 468g CrMo
- Body: 60661 CNC AL
- Spindle: Cromoly
- Bearings: 3 Cartridge
- Springs: SWP
- Pins: 16 adjustable height grub pins per pair
- Cleat: XPEDO XPT (6° Float)

$89.00
- Weight: 312g
- Body: CrMo Investment
- Spindle: Cromoly
- Bearings: 1 Cartridge/2DU
- Springs: SWP
- Cleat: XPEDO XPT (6° Float)

$79.00
Weighing in at a mere 260 grams per set, the SPRY, with its sleek, super low-profile design, makes a great addition to the XPEDO flat pedal line up. The magnesium-cast body measures only 11mm thin and allows plenty of ground clearance in the most aggressive terrains. Its large platform area with 14 pins on each pedal provides superior grip for maximum pedal efficiency.
- Weight: 260g
- Body: Magnesium
- Spindle: CroMo
- Bearings: 2 Cartridge
- Bushings: 1 DU
- Pins: 28 Straight Pins per pair
- Size: 106x100x11 (mm)

$99.00
- Weight: 220g
- Body: NEP Injection-Molded
- Spindle: Cromoly
- Bearings: 3 Cartridge
- Springs: SWP
- Q-Factor: ±53 (mm)
- Cleat: XPEDO THRUST 7 (6º Float or Fixed)

$169.00
- Weight: 210g CrMo
- Body: Carbon Injection-Molded
- Spindle: Cromoly
- Bearings: 3 Cartridge
- Retention: MDU Elastomer (Preset)
- Q-Factor: ±53 (mm)
- Cleat: XPEDO THRUST 7 (6º Float or Fixed)

$20.00
- 1-Piece, molded, cage-style body
- Loose ball bearings
- Accepts toe clips/straps
- Spindle Material: Chromoly
- 305g
Page 1 of 5
Next page