Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Pedals

$37.00
Dimension Combo Pedal Sets are assembled with size large toe clips, straps and reflectors. - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 520g
$30.00
Dimension Combo Pedal Sets are assembled with size large toe clips, straps and reflectors. - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 475g
$16.00
Dimension Mountain Basic Pedals. - Molded nylon 1-piece, caged-type pedal with reflectors - Accepts toe clips - Hang tag packaging - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 330g
$54.99
The DEFTRAP will revolutionize what you should expect from a nylon composite pedal with it's non-offset symmetrical platform to offer added stability behind the spindle, a true concave pedal profile so your feet sink into it, 10 total pins (8 replaceable cr-mo pins and 2 molded pins), our tried and true sealed bearings and DU bushing system, and top tier nylon and glass fiber composite material to create a pedal that feels unlike anything on the market. With a focus on ride quality, increased foot support, added stability, leading traction, ability to skim over rocks, and even coming in 10 colors-the DEFTRAP will challenge you to rebel against the conventional perception that a value pedal cannot rival the best pedals on the market!
$24.95
A nylon evolution of DMR's V12 body design. Equipped with the same concave footprint and narrow profile DMR pedals are known for, while spinning on a Dual DU bushing system to provide the value of a plastic pedal with a thoughtful approach to increased durability. - Chromoly axle - Dual DU bushing system - Full-length 6mm off-road pins for added grip
$163.30
This set of pedals aims to provide a large platform, thin profile, durability, tune-ability and serviceability. Ideal for anything from all-mountain, to downhill, to snow. - 105x115mm pedal body - 17mm concave foot bed - Extruded 6061 aluminum body and 4140 chromoly steel axles - High-load DU bushing and cartridge bearing - 11 pins per side and 7 of which can be flipped to fit short- or long-way to fine tune the amount of grip desired - 9/16"
$59.99
Crank Brothers steps up to the plate to provide downhillers, freeriders, and BMXers with one sweet platform pedal. Most flat pedals have the traction pins' hex holes on top, making them very difficult to remove if they break or are worn down. The 5050s have removable plates so you have full freedom to customize pin location for rider preference and terrain. Additionally, this puts the pin's hex-hole location on the back of the plates, making them easy to remove after heavy duty use. The 5050 pedals are crafted from 6061-aluminum and utilize a bushing and cartridge bearing system that is completely user-serviceable.
$26.99
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees
$197.00
The Dagga is our brand new DH pedal. It was designed in collaboration with Chris Kovarik – one of the forefathers of downhill and flat pedal riding. Kovarik's unique and high-impact riding style inspired the Dagga's key features – our largest platform and widest stance ever. - Meant to be ridden with thick-soled shoes, the Dagga offers improved stability, power and articulation of the bike. - The Dagga features the same high strength chromoly axle system as other models with a double seal, inner bushing and outer cartridge bearing. - Largest Q-Factor, largest body, longest and largest amount of pins!
$40.00
Replace worn-out spindles or customize your stance width, with these kits for iSSi Road pedals. - Chromoly spindles - Sealed cartridge bearing and bushing in an alloy cartridge - Compatible only with iSSi Road pedals - Installs with iSSi Road spindle tool (TL5499) - Pedal Spindle: 9/16" - Spindle Material: Chromoly Steel
$50.00
Replace or overhaul iSSi pedals with Bushing & Bearing Spindles with these handy kits, or customize your stance width with longer spindle options. Includes: - iSSi chromoly spindles - Sealed cartridge outer bearings - Inner Bushings - Spindle nuts - Seals - iSSi-branded end caps
$17.00
- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit. - Includes 36 steel pins and 2mm spacers to replace both sides of two pedals - The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.
$119.00
The Baldwin offers the best of both worlds, bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support. -  Weight: 332g CrMo -  Body: 60661 CNC AL -  Spindle: Cromoly -  Bearings: 3 Cartridge  -  Springs: SWP  -  Cleat: XPEDO XPT (6° Float)
$169.00
Xpedo's designers went back to the drawing board for the GFX to create a fresh new design to meet the demands of the evolving downhill racing styles. The latitude entry system allows rapid engagement in any condition, positioning the front claw upwards for intuitive, seamless contact with the pedal. The Posi-Fit retention system is fully adjustable for fine-tuning the entry and release. The low-profile 6061 CNC body with adjustable height pins provide traction and support with any style of shoes. Tapered cromoly spindles roll on three precision cartridge bearings for easy maintenance. Wider Q-factor allows ample clearance between shoe and crankarm. - Weight: 468g CrMo - Body: 60661 CNC AL - Spindle: Cromoly - Bearings: 3 Cartridge - Springs: SWP - Pins: 16 adjustable height grub pins per pair - Cleat: XPEDO XPT (6° Float)
$99.00
- Weight: 220g  - Body: NEP Injection-Molded - Spindle: Cromoly  - Bearings: 3 Cartridge - Springs: SWP  - Q-Factor: ±53 (mm) - Cleat: XPEDO THRUST 7 (6º Float or Fixed)
$199.95
Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. They are engineered to lock in your foot with a shape that matches your shoe, rear-loading pins for grip, and a dual-concave profile to further cradle your feet. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform shaped to match the footprint of your shoe. Large is 112mm x 106mm, small is 105mm x 99mm. Dual-Concave Profile: - Waveform pedals are 14mm thick on the perimeter and just 12.5mm thick in the center. This profile cradles your foot, front to back and side to side. Extra Grip: - Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. An additional six pins ship with each set of pedals and they are available as replacement parts. Shaped with Purpose: - The shape of Waveform Aluminum Pedals matches the footprint of your shoe Reliable Performance: - Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions. Tapered Edges: - Large, tapered leading edge to deflect pedal strikes on rocky, rooty terrain Two sizes: - Large: 112mm x 106mm - 384g - Small: 105mm x 99mm - 373g Each size is proportionally scaled to match the silhouette of your shoe based on foot size or pedal size preference.
$17.10
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.
$39.95
Wellgo WPD-823 Clipless Mountain Pedals. - Includes 98A cleats, Shimano SM-51 compatible - Dual-spring release/entry tension adjustment - Four degrees of Rotation - 9/16"
$60.00
Lots of foot-huggin' lovin and a natural connection to your bike...that's what you get from VP’s all new, dual-concave platform design. VP-Aim was developed with input from both top free riders and local soul riders to deliver the right feeling of control and security at the right price. It’s still thin, it’s still stylish, and it can take all the beating that you can give it and keep rolling on. - 105 x105 x18mm platform - 9/16"
$80.00
VP's Flat Pedals combine wide platforms and a great grip for excellent stability with extruded and CNC-machined aluminum bodies for light weight and a rainbow of colors for high style. You also get tough chromoly axles and sealed bearings for durability. - 345 grams - 9/16" axles
$22.00
VP's Split Cleats boast super-smooth and easy entry/exit into your clipless pedals, excellent durability and maximum power transfer. They're made of a tough and light composite material, are compatible with VP and Look Keo pedals (pedals sold separately) and even have areas that grip for walking traction. That's all great, but what really sets the Split Cleats apart is how easily and accurately they can be replaced when they wear out. The cleats split in half so that you simply remove each half and use the half still on the shoe to ensure perfect cleat placement every time! With these cleats you'll never have to fuss around trying to get your new cleats in the right place again and it only takes a minute or two to replace cleats, too. Genius! The Split Cleats are available in 2 models, one with 7 degrees of lateral float for your feet and one that's fixed (no float). - Fits VP and Look Keo pedals (pedals sold separately)
$50.00
VP's Vex Pedals are incredible workhorses with sturdy, large platforms and a dual-concave design with pins for an awesome grip. They're also light making them ideal for mountain biking, freeriding, BMX and even city riding. They're built to last, too, with cast-aluminum bodies, tough forged, heat-treated and CNC-machined chromoly axles and quality sealed bearings. - 385 grams - 9/16 axle
$103.99
VP's Vice pedals are nice, flat pedals that perform and look great. They have large platforms and are low-profile reducing impacts with rocks and roots if you use them off-road (they're perfect for BMX and other bikes, too). They have 12 pins per side so they grip no matter what, and they feature extruded/CNC-machined aluminum bodies with heat-treated chromoly axles and sealed bearings for durability. - 406 grams - 9/16" axles
$30.00
Alloy pedals with a smaller platform that is ideal for smaller sized shoes and offers ample ground and cornering clearance. - 6061-T6 die-cast alloy body construction - 2DU Bushing System with low-friction coating - Boron axles - 14 removable traction pins per pedal - Pedal body dimensions: 105 x 93 x 25mm (LxWxH) - 9/16"
$106.00
- Built with an aluminum body and oversized axle to handle the roughest trail conditions and biggest descents. - TIME's famous easy entry and exit system allows riders to easily put a foot down when needed and clip back in fast. - The open, self-cleaning design keeps the pedal clean so its function is not compromised by dirt, debris, or mud. Specs: - Pedal Material: Aluminum - Pedal Weight: 238g - Cleat Compatibility: ATAC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16"
$23.00
- The ATAC EASY 10° cleat works with all TIME mountain pedals. - Included with mountain pedal models numbered "2" and "4." - Release angle of 10 degrees and is compatible with all two-hole cycling shoes. - Don't let the "Easy" name fool you. If you are a high-performance rider looking to reduce the release angle from our 17 or 13 degrees, this is the choice for you.
$84.00
- Large platform and an easy-entry system, make it perfect for everyday use. - Cleat engagement is easy and positive in every condition and for every skill level. - Hollow steel axle makes the pedal lightweight yet durable, while the open design keeps you riding with ease, clearing mud and debris every time you clip in. - Pedal Material: Composite - Pedal Weight: 192g - Cleat Compatibility: ATAC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16''
$23.00
- Works with all XPRO and XPRESSO pedals. - Not included with new XPRO and XPRESSO pedals. - This is a zero-float cleat design, so there are zero (0) degrees of heel float and no lateral float along the pedal axle. - Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.
$23.00
- Developed for the TIME XPRO & XPRESSO road bike pedal range. - They allow angular and lateral freedom in order to respect the natural movements of your legs and joints. - You can also adjust the Q-factor (by switching the cleats) - The Bi-material brings more durability when walking with the cleats. - These cleats are the stock cleats included with all XPRO & XPRESSO pedals.
$290.00
- Developed for the demands of professional Enduro racing, the SPECIALE 12 is made of a 6106-T6 aluminum - A wide platform, adjustable pins for optimal grip, and a micro-adjustable clamping system combine to exceed the demands of the most advanced riders. - TIME's renowned engagement system allows easy engagement with a positive, predictable entry and release, as well as a design that self-cleans even in the most difficult conditions.