Weighing in at a mere 260 grams per set, the SPRY, with its sleek, super low-profile design, makes a great addition to the XPEDO flat pedal line up. The magnesium-cast body measures only 11mm thin and allows plenty of ground clearance in the most aggressive terrains. Its large platform area with 14 pins on each pedal provides superior grip for maximum pedal efficiency. - Weight: 260g - Body: Magnesium - Spindle: CroMo - Bearings: 2 Cartridge - Bushings: 1 DU - Pins: 28 Straight Pins per pair - Size: 106x100x11 (mm)
- Large platform size with concave profile combines support with ultimate grip - Strong and lightweight one piece alloy body in eight color options - Forged chromoly axle delivers strength and durability - Shot-peen surface increases fatigue life and impact resistance - Material: Alloy - Platform Size (mm): 100 x 105 - Platform Profile: (mm) 16mm - Weight (g): ±395/set - Axle: Cold-forged Chromoly steel - Bearing/Bushing: Industrial bearing, IGUS bushing - Pins: 12 steel & 8 alloy pins per pedal - Virtual Concavity - Finish: Mottled / grunge anodized
Size-specific enthusiast-level platform pedal provides optimal shoe/pedal interface. - Optimal surface area - Minimal profile 16mm thin - 10 adjustable pins per side for grip - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us); 37-43 (EU) - Stamp large recommended for shoe sizes: 10-15 (us); 43-49 (EU) Specs: - Spindle material: forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Inner bearing type: IGUS LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Footprint: 114mm x 111mm (Large); 100mm x 100mm (Small) - Weight: 470g per pair (Large); 415g per pair (Small) - Warranty: 5 years
The E-PR1 Clipless Road Pedal by Exustar features an engineered thermoplastic body with a CNC-machined CrMo axle and a fiberglass-reinforced engineered thermoplastic binding, which is tension-adjustable. They're compatible with EPS-R (Look Keo-style) cleats, and weigh only 130 grams each. - Engineered thermoplastic body sized 82 x 82 mm - Heat-treated, CNC-machined CrMo axle - LSL bushing and sealed bearing reduces weight and thickness - Binding is tension-adjustable - Compatible with EPS-R (Look Keo-style) cleats
PD-EH500 pedals FEATURE - One side SPD, the other side flat - Light action binding makes frequent stepping-in & out easier - Better grip on flat side for wet condition BENEFIT - Convenient road touring pedal - Optimized for urban riding - Multi-condition - Best match with CT or MT shoes
Shimano's M540s are race-ready clipless pedals that don't require a team budget. These rugged, light beauties feature dual-sided Shimano SPD bindings that are easy to enter and exit and deliver excellent power transfer and maneuverability. The bindings are adjustable for dialing in the perfect tension and these sweet pedals have an open mud-shedding design to prevent clogging. Plus, the M540s are built to last with chromoly axles and sealed-cartridge bearings.
VP's Flat Pedals combine wide platforms and a great grip for excellent stability with extruded and CNC-machined aluminum bodies for light weight and a rainbow of colors for high style. You also get tough chromoly axles and sealed bearings for durability.
VP's 69s are the perfect DH race, freeride, trail and BMX pedals. They are optimized for sticky shoes with 6 pins (VP's tallest and sharpest) per side on concave platforms that also grip your soles. These trick pedals boast extruded and CNC-machined aluminum bodies, tough chromoly axles and sealed bearings for long life. The bodies are built to withstand rock strikes without losing pins, too.
There’s no need to choose between clipless performance and platform versatility with iSSi's Flip II pedals. Go clipless on the commute or sport clogs on campus. - Flip II: 56.5mm spindle length - Wear 2-bolt style cycling shoes or casual flat shoes - Compatible with iSSi, Shimano SPD and Wellgo 98A cleats - Chromoly spindle, ED-coated - Standard 15mm wrench flats as well as 8mm hex broach - Black chrome hardware - Adjustable spring tension - 4° cleat float - 14.6° angle of release - Bushing/sealed bearing combination for low-maintenance durability - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch
For serious gravity aficionados only. The ATAC DH 4 is built like a tank for big drops, big rocks – the most extreme downhill trail conditions. The ATAC DH 4 is a downhiller’s dream featuring an aluminum body and oversized hollow steel axle. The ATAC system allows you to ‘put a foot down’ and clip it back in when needed. The open, self-cleaning design keeps the trail off the pedal, clearing debris and mud every time you clip in.
$85.00 - $90.00
The Flash is iSSi's minimalist all-rounder take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. - Bushing / Sealed bearing spindle, 52.5mm - Customizable fit with longer spindle length options (+6 and +12mm) - Models with longer spindles available in BlackOut - SPD-compatible cleats and mounting hardware included
You've got flat shoes and shoes with cleats. Are you really gonna let your pedals tell you which ones you can wear? Crank Brothers' hybrid-style Double Shot is a flat and clipless pedal to suit your every pedaling whim. Molded pins and ribs offer superior grip, and diamond plate pads are supremely tactile. You've got entry from either side of the pedal, so that's two chances per revolution to catch. Thanks to the wide, platform-style body, though, you'll keep moving even if you don't. Specifications: - spindle material: forged scm 435 chromoly steel - body material: A380 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - cleat: premium brass cleats with shims included - weight: 395g per pair
Crank Brothers' Eggbeater pedals are 4-sided, making them super easy to enter and exit. Their open design sheds mud and debris quickly, and these pedals sport 6-degrees of knee-friendly float. The Eggbeater 2s feature forged chromoly axles, stainless-steel springs, and cast steel bodies. Plus, the internals are water-tight for excellent durability and consistently smooth pedaling.
VP's R73 Carbon Road Pedals are their top-of-the-line Look-cleat compatible clipless road-bike pedal. They offer easy and secure entry/exit, a feathery weight and awesome power transfer. These fine pedals boast light and durable carbon bodies with stainless-steel reinforcements to reduce cleat wear; tough CNC-machined chromoly axles and super-high-quality sealed bearings for long life. You also get VP's ingenious Split Cleats that split into two with the use of a jigsaw-like keyed section making cleat replacement easy, fast and extremely accurate for anyone. The cleats have 7 degrees of lateral foot float and the pedals have adjustable release tension, too.
SPANK Industries set out to make the perfect pedal for every rider, and the SPOON Pedals offer three platform width options for riders of any age or foot size. The SPOON 90 Pedals are the perfect solution for younger riders and many women who have compromised ideal support and grip with traditional size flat pedals. SPANK SPOON 100 Pedals are ideal for riders with average sized feet who want a flat pedal upgrade that won't break the bank. The extra wide pin pattern on SPANK's SPOON 110 Pedals spread load around the perimeter of large sized shoes, offering more predictable grip and enhanced support over traditional size flat pedals. Each SPOON pedal sports a 16mm-12mm concave profile lined with 20 steel pins, as well as a forged chromoly axle which delivers the strength and durability SPANK pedals are famous for. - SPOON 90 Pedals: US Men size 6 (Euro 39) and under; ±360g /set - SPOON 100 Pedals: Men sizes 7 to 10 (Euro 39-44); ±400g /set - SPOON 110 Pedals: US Men sizes 11 (Euro 44) and up; ±420g /set - Industrial grade axle assembly - Chamfered leading edges - MGR extruded, CNC optimized alloy body - 12-16mm concave platform profile - Cold forged chromoly steel axle - Industrial sealed bearing and IGUS bushing - 20 steel pins per pedal - Shot peen anodized finish with laser logos - Available in Black, Red, Blue, Green - Suitable for Kids, Race, Freeride, Trail
- Super thin-profile platform pedal designed for freeride, BMX, and urban riders -Durable 6061 alloy construction with 20 replaceable traction pins (10 per side): 13.3mm height/105mm width - CrMo spindle axle with a smooth running, sealed inner DU bushing/dual-outer sealed bearing system - Weight: 380g
A wide flat pedal with wicked grip, 45NRTH's Heiruspecs deliver supreme contact with the bottom of your traditional winter boots. The big CNC-extruded body provides a massive footprint and 16 alloy pins spread across the concave body to provide the ultimate grip. Sealed DU bearings keep them spinning smooth and replacement pin kits are available (sold separately) in seven different colors so you can color-coordinate your rig.
Crank Brothers' most versatile pedal. The Candy excels at it all — cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. Specs: Spindle material: Forged scm 435 chromoly steel Body material: 6061-T6 aluminum Wing material: Stamped steel Spring material: 300 series stainless steel Release angle: 15° / 20° Q-factor: 52mm Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Cleat: Premium brass cleats with shims included Weight: 355g per pair Warranty: 5 years
The Mallet 2 pedal from Crank Brothers is ready to drop the hammer. No, seriously, this thing has been redesigned and rebuilt from the ground up, and it's a whole new creature. Durability and a lightweight aluminum body take the center stage in this versatile pedal that's equally at home shredding singletrack and providing a platform for your sneakers while you ride to class. The Mallet 2 offers a flat pedal feel and clipped-in control simultaneously for the best of both worlds and performance you can feel. And, with a customizable float and release angle, your body will thank you with miles and miles of fun.
Size-specific elite-level platform pedal provides optimal shoe/pedal interface. - Optimal surface area - Minimal profile 16mm thin - 10 adjustable pins per side for grip - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us); 37-43 (EU) - Stamp large recommended for shoe sizes: 10-15 (us); 43-49 (EU) Specs: - Spindle material: Forged SCM 435 chromoly steel - Body material: 6061-T6 aluminum - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Footprint: 114mm x 111mm - Adjustable pins: 10 per side - Weight: 455g per pair - Warranty: 5 years
Shimano Deore XT M8040 Flat Trail Pedals offer legendary performance and durability. - Superior grip for aggressive trail riding - Fore-aft concave - 10 pins on each side - Optimized platform size - 2 body size options (also means different Q-factor) - S/M: 100mm x 105mm, for 36-43 shoe - M/L: 110 x 115mm, for 43-48 shoe - 2 pin length options : long & short - Pedal System: Flat Pedal - Average Weight: S/M size 469 grams, M/L size 514 grams
Shimano's PD-R550 SPD-SL Pedals offer wide, stable platforms for great support and stability when you're out on the road. An extra-wide platform maximizes power transfer. Durable stainless steel tread plates reduce flex and pedal body wear. Wide bearing placement provides uniform load distribution for miles and miles of riding.
The ATAC XC 4 pedal is designed for cross country mountain bike riders. It features a chromed, hollow steel axle making it light and durable. The exclusive ATAC system (TIME patent) offers very easy engagement and its open design automatically clears debris each time you step in. The ATAC XC 4 is also suitable for trail riding, bike touring, and gravel road riding.
The iSSi Road Carbon Pedals provide large platforms for excellent power transfer and stability. Bushing and sealed cartridge bearings add durability, while the Chromoly spindles resist corrosion for long life. - Simple installation with a 8mm hex key - Available in standard spindle length or +5mm - +5mm model only available in Intense Black - Stainless Steel cleat plate provides a solid pedal interface - Adjustable spring tension - 7° float, 3-bolt split-cleat included - Cleat Interface: Look KeO - Material: Carbon - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Single Sided Clipless - Spindle Material: Chromoly Steel - Weight: 266 grams
VP's Vice pedals are nice, flat pedals that perform and look great. They have large platforms and are low-profile reducing impacts with rocks and roots if you use them off-road (they're perfect for BMX and other bikes, too). They have 12 pins per side so they grip no matter what, and they feature extruded/CNC-machined aluminum bodies with heat-treated chromoly axles and sealed bearings for durability.
$105.00 - $120.00
The Flash is iSSi's minimalist all-rounder take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. Three sealed cartridge bearings make the Flash III iSSi’s smoothest rolling, most durable, lightest clipless pedals with multiple spindle length options. - Spindle Type: Flip III: Triple Bearing - Smooth-rolling at an affordable pricepoint - SPD-compatible cleats and mounting hardware included - Available with different spindle length options (+6 and +12mm) - Longer spindle models available in Blackout
$105.00 - $110.00
iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. Plus, four degrees of float helps your knees track naturally during every crank revolution. The Trail II pedals are available in three different spindle lengths, standard, +6mm, and +12mm. The longer spindle models are available in Intense Black.
From the company that pioneered clipless pedal technology comes the Tour de France-winning Keo 2 Max pedals. They feature lightweight composite bodies and wide platforms for excellent support, comfort and pedaling efficiency. Complementing the great feel is Look's low-profile design that places you closer to the axles for even more pedal power and a lower center of gravity for better cornering. There's also built-in float allowing your feet to self-adjust to the optimum position while you pedal, which protects your knees. Plus for smooth running and durability there are chromoly axles, three sets of sealed bearings plus stainless-steel contact plates. You also get adjustable release tension. - Usage: Recreational to Competition - Body: Composite - Axle: Chromoly + - Pedal Stack Height + Cleats: 17.3mm - Contact Surface Area: 500 mm² - Float: 8 or 12 adjustable spring - Cleats: Kéo Grip Cleats - Pedal Weight: 130 grams (328 grams per pair with cleats and screws) - Pedals Thread 9/16-inch
The original game changer! SPANK Industries' SPIKE Pedals changed the world's concept of the benefits a flat pedal can offer and set the benchmark for top of the line value. The SPIKE Pedal's svelte 12mm thin forged alloy body not only maximizes pedaling clearance, but also grip and stability, by placing the rider's foot closer to the pedal axle. Equipped with forged hollow-tapered chromoly steel axles, SPIKE Pedals offer unmatched ultimate strength at just 420g per set. 20 steel pins in a virtual concavity configuration offer supreme grip without compromising platform thickness. Oversized industrial sealed bearings and IGUS bushings guarantee exceptional durability and performance. Often imitated, the SPIKE's CNC chamfered leading edges deflect impact forces and bring and instantly recognizable edgy aesthetic that always turns heads. - 12mm thin - Massive 100x100mm platform - ±420g/set (with full pin complement) - Cold forged, CNC optimized alloy pedal body - Cold forged chromoly steel axle - Chamfered leading edges for improved clearance and reduced impact forces - Chamfered side edges for improved cornering clearance - Oversized sealed full compliment inboard industrial bearing - Sealed outboard IGUS bushing - 20 adjustable pins per pedal - Full sized hex head pins improve durability and maintenance - Inboard friction seal prevents contamination and reduces unwanted pedal spin
The Baldwin offers the best of both worlds, bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support. - Weight: 332g CrMo - Body: 60661 CNC AL - Spindle: Cromoly - Bearings: 3 Cartridge - Springs: SWP - Cleat: XPEDO XPT (6° Float)