Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Wheels

Zipp AM Rim Tape
$7.00
Package comes with two pieces of rim tape for use with the Zipp clinchers. Woven nylon material. Tape is extra thin with a thickness of 0.5 mm. Note: For Zipp 700c and 650c aluminum/carbon hybrid clichers, use the 16 mm rim tape. For Zipp 30 wheel set use 18mm but for the wider Firecrest and Firestrike carbon clinchers use the 20mm x 1/2mm rim tape.
Wheels Manufacturing Inc. Outer Axle Nut
$1.25 - $5.75
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually
Stan's NoTubes 3.30/3.30Ti Hub Kit
$15.00 - $20.00
Stan's 3.30/3.30Ti Hub Kit converts Stan's 3.30 front hubs from quick-release to through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on. Conversion kits available in 12mm and 15mm.
Stan's NoTubes Alloy Tubeless Valve Stems
$23.00
Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.
Stan's NoTubes Cross Country 29er Rim Strip
$29.99
Stan's Cross Country 29er Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Stan's NoTubes Rim Tape
$11.25 - $25.99
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
Stan's NoTubes Standard Rim Strip
$29.99
Stan's Standard Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Stan's NoTubes Tubeless Valve Stems
$16.00
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
SRAM Rise 40 Conversion Caps
$22.00
SRAM's Rise 40 conversion caps are the ticket for converting your Rise 40 wheels to a different axle type. You can easily change axle standards with the SRAM Rise 40 conversion cap tool (sold separately).
SRAM Rise 60 Conversion Caps
$18.00
SRAM's Rise 60 conversion caps are the ticket for converting your Rise 60 wheels to a different axle type.
SRAM X0 Hub Conversion Caps
$17.00 - $27.00
SRAM's X0 conversion caps are the ticket for converting your X0 hubs to a different axle type.
Quality Wheels Formula / Alex AP18 27-inch Front
$53.00
The best price on the market for a wheel meant to be ridden. Single-wall rims and loose-ball hubs that come out of the box round and true.
Quality Wheels SRAM 406 6-bolt / Sun SR25 29-inch Rear
$95.00
Our best value in Quick-release disc wheels.
Quality Wheels Shimano TX505 / Alex DC19 700c Front
$79.00
If you need just one wheel for on-the-spot repairs, this wheel features both rim brake and disc brake compatibility.
Problem Solvers Axle Nut
$2.49
The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.
Origin8 Cr-Mo Track Rear Axle Nuts
$3.90
- Flanged 15mm axle nuts - Durable chromoly construction - Spacing / Axle: B/O
Mavic Aksium Disc 6-Bolt Front
$140.95
Aksium is a great choice for everyday road riding. With a smart balance of high-quality materials and durable construction, it shows aspiring road riders the clear performance benefits that a high-quality wheelset can make. This Aksium Disc model includes special features aimed at the unique demands of disc brake road bikes. It uses straight pull spokes for added stiffness and strength. Mavic also increased the spoke count to 24 on both front and rear wheels. With a 17mm internal width, these rims are compatible with tires up to 32mm, making them versatile, comfortable and ideal for adverse road conditions. The disc-specific hubs feature super strong QRM bearings that provide low friction and long-term durability, with no servicing needed. The Aksium Disc is made for standard quick release, and is compatible with either 6-Bolt or Center Lock brake rotors.
Mavic Aksium One Disc Rear Wheel
$158.95
Mavic's renowned Aksium wheels now come dressed from disc brakes' superior modulation and power! Their lightweight 6106-aluminum rims spin up to speed in a snap and disc brake compatibility ensures that you retain control in even the worst conditions. You also get bladed aero spokes and Mavic's slippery QRM hubs for blazing speed wherever you ride. Make every ride faster and more fun with the Aksium One Discs!
Mavic Crossride Disc Front Wheel (15mm Through-Axle)
$129.99
Add instant speed and legendary Mavic quality to your mountain rig with the Crossride Disc Wheels. They boast feathery, yet durable 6106-aluminum rims laced to Mavic's reliable QRM hubs for easy maintenance and an awesome ride. The stiff rims and oversize 15mm through-axle interface steer you confidently through high-speed turns and rugged terrain. They're a great upgrade for any of your disc brake-equipped bikes.
Mavic Crossride Disc Rear Wheel (142 x 12mm Through-Axle)
$169.99
Add instant speed and legendary Mavic quality to your mountain rig with the Crossride Disc Wheels. They boast feathery, yet durable 6106-aluminum rims laced to Mavic's reliable QRM hubs for easy maintenance and an awesome ride. The stiff rims and frictionless, quick-engaging hub react quickly and track confidently even through high-speed turns and rugged terrain. Plus, the 142 x 12mm through-axle makes for an extremely strong, flex-resistant rear end.
Mavic Ksyrium Elite Wheels
$474.99
For over a decade, Mavic’s Ksyrium Elite has stood for high reliability, light weight, and versatility. Mavic’s exclusive and patented Fore Drilling creates a strong, durable connection of the spokes to the rim, while their innovative Isopulse lacing improves stability and lateral stiffness under heavy loads, such as sprinting or climbing. The slightly wider rim has an internal width of 17mm, which lowers rolling resistance by 13% and provides 18% more tire air volume, which helps you avoid pinch flats. This extra width comes at zero weight penalty, thanks to ISM 4D, which removes rim material where it's not needed and leaves it where stresses are greatest, such as around the spokes. This means you get an incredibly lightweight rim with all the strength, stiffness, and fatigue resistance you expect from Mavic. The Ksyrium Elites include Mavic’s tried-and-true Yksion Pro tires, featuring front- and rear-specific designs optimized for the different demands each tire must meet, resulting in a beautifully integrated wheel-tire system you can trust.
Mavic Rear Road Quick Release
$29.90
Mavic's road quick releases feature a composite lever and Mavic's exclusive cam system. Sturdy and tight, these quick releases allows quick and lightweight wheel fixing.
Mavic Universal Wheel Magnet
$8.99
- Cyclocomputer wheel magnet - Fits most bicycle spokes - For Tracomp carbon spokes found on Mavic wheels, see Tracomp Spoke Removeable Magnet (each sold separately)
ENVE Brass Replacement Spoke Nipple
$1.00 - $4.99
ENVE brass replacement nipples fit perfectly into their molded spoke hole carbon fiber wheel systems.
ENVE MTN Tubeless Kit
$49.99
Use ENVE's MTN Tubeless Kit on your ENVE mountain bike rims to reduce flats and improve traction. When used in combination with tubeless-compatible tires and sealant (sold separately), the kit lets you run lower tire pressure to maximize grip and control, whether you're going up a steep climb or around a tight, off-camber switchback. The kit includes two valve stems and enough tape for two rims, even 29ers.
DT Swiss Aerolite 14/19/14g (Black) Spoke
$4.99 - $100.00
- Bladed Revolution spokes 2.0/.09x2.3/2.0mm, black surface treatment resists scratches - Cold forging technology, CrNi stainless steel with rolled threads - No hub slotting necessary - 139g (32/265mm) - Box of 20 - Nipples sold separately
DT Swiss Champion 14g Black Spokes
$0.99 - $89.99
- Straight gauge 2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads. Black surface treatment resists scratches - 222g @ 32h/265mm - Box of 72 - Nipples sold separately
DT Swiss Competition 14/15/14g (Silver) Spoke
$1.69 - $169.00
- Double butted 2.0/1.8/2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads - 192g @ 32h/265mm - Box of 100 - Nipples sold separately
Chris King ISO B Front Hub
$241.00
Chris King ISO B 110x15 front hubs are designed as precision mountain tools. We use one-piece solid axles to provide a stiff hub with rail accurate steering, transferring every minute adjustment you make to the trail. To thwart mud, water, and contaminants as you power through rough trails, ISO hubs have heavy-duty bearing seals, and a threaded driveshell seal ring. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. - Engineered, manufactured and assembled in Portland, Oregon USA - Optimized flange angle/alignment for improved spoke path, and symmetric wheel build - 5-year built-to-last warranty - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with our Chris King Hub Service Tool - Responsibly lightweight - Drilling: 32h
Chris King ISO B Rear Hub
$504.00
Chris King ISO B 148x12 rear hubs are designed as precision mountain tools. We use one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, ISO B hubs have heavy-duty bearing seals, and a threaded driveshell seal ring. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use.?? The patented Chris King RingDrive with 72-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound. - Engineered, manufactured and assembled in Portland, Oregon USA - Updated hub shell shape with canted flanges for stronger wheel builds - 5-year built-to-last warranty - Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement - Legendary made-in-house bearings - Easily serviceable and completely re-buildable with our Chris King Hub Service Tool - Responsibly lightweight - Specifically designed for "BOOST" 148mm x 12mm axle standard - Drilling: 32h
Page 1 of 13 Next page