Spank's Spoon 32 rims are gravity rims done right! If your rides encompass big hits and fast descents then a pair of Spoon 32 rims might be just what you need to tackle your favored terrain. - Six Series aluminum alloy - Disc specific rim - Tubeless Ready
The OOZY Trail 295 Rim was the first Spank Industries OohBah profile rim model, with a revolutionary tubeless enhancing design, called BeadBite. The OOZY Trail 295's wide 29.5mm outer, 24.5mm inner width allows the use of a wide range of tire sizes and profiles, and intensifies wheel stiffness while increasing the tire volume, improving both comfort and traction in loose conditions. Despite its wide burly appearance, the SPANK OOZY Trail 295 is no heavy weight. At as low as 450g in, it goes head to head with many carbon rim competitors with a safer, more durable, responsible, and economic Dynamal alloy construction. SPANK's patented Oohbah rim profile with inverted tube well, creates an element of hoop strength in the lateral profile, while reinforcing the critical side wall flanges, and means wider, lighter rims which deliver the highest strength to weight ratio on the market. Smooth ramps leading to the bead seats mean tubeless inflation is a breeze with most hand or floor pumps. - Key technologies: Bead Bite, OohBah, Dynamal Alloy - Material: MGR Dynamal Alloy - Size (in.): 26" / 27.5" / 29" - Weight (g): ±450 (26") / ±470 (27.5") /± 490 (29") - Hole Count: 32H - Inner / Outer Width (mm): 24.5 / 29.5 - Valve: F/V Presta - Tubeless: tubeless ready - Finish: polish anodized, decal logos - ERD (mm++): 528 (26") / 555 (27.5") / 591 (29") - ETRTO (mm): 559x24.5 (26") / 584x24.5 (27.5") / 622x24.5 (29")
Wheels are the first point of contact between you and your bike, and the trail you’re riding on. And while wheel sizes and standards continue to develop significantly year on year, often to both the rider and the industry’s dismay, very little innovation has been seen in the compliancy and responsiveness of the wheel as this first, most important contact and conductor. What Spank has seen in recent years is that bike suspension is continuously evolving and adapting to compensate for stiffer frames and more rigid, deeper profile carbon fiber rims. This overall stiffer rig is being softened, or counter-acted by both bike suspension, and tire design — not to mention the ever lower and lower tire pressures riders are running. Rider position (wider, lower, more forward) is also being impacted directly by the bike frame and cockpit geometries which is constantly aiming for a better riding feel. So surely it is overdue time to re-examine how the engineering of the wheel can become an active contributor to the efficiency of the overall set up. Spank Industries has done just this. - Low sectional profile height and wide width, adds radial compliance, while keeping high lateral stiffness. - 30mm internal width extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use, without negative squaring off of tire profiles. - Ideal for Trail/AM/Enduro bikes looking for a wide profile, without the weight penalty
- Unique profile with low sectional profile height and wide width, which adds radial compliance, while keeping high lateral stiffness. - Improved radial compliance for better traction over bumps and chatter, while reducing negative feedback to the rider. Performance and comfort enhanced. - Vibrocore inner well reduces the transmission of harmful vibration frequencies, meaning less vibration for the suspension and rider, also increasing the fatigue life of the rim. - 30mm internal width is extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use without negative squaring off of tire profiles. - Ideal for DH and Freeride.
Page 1 of 1