Minimal and mighty! The USB rechargeable Asteroid tail light from Portland Design Works mounts in seconds and shines super brightly with high quality optics so you can be seen. The double-click lens prevents accidental ons and offs. Ride up to 35 hours before needing a charge. Pairs nicely with the Asteroid Headlight - also available as a light set. - 3 Modes (burn time): Flash (35 hrs), Pulse (6.5 hrs), Steady (4.5 hrs) - Weatherproof exterior for all season riding - Micro USB recharging cord included - Weight: 76 g (2.7 oz)
- Modes include High Flash, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 12 hours - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Side illumination ports - Multiple Mounting Options: vertical or horizontal mounting options as well as a clip for mounting to packs, bags or belts
- Light guide for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - Compact size - Bracket with flexible mounting option - .06 LUX - 5 Modes - Run time on Eco = 36 hrs - Run time on High Steady = 20 hrs
MSW USB rechargeable taillight. Includes micro USB cable for charging. - Tool-free installation - Aluminum body construction - 15 lumen output - Fits 19mm–48mm tubing - 28g weight
Pedal confidently day or night with the TigerMoth 20-Lumen Taillight attached to your rig. Keep your eyes on the road ahead while its efficient, bright red Micro-LEDs watch your back. USB-rechargeable with simple, tool-free installation. - USB-rechargeable (charging cable included) - Features both clip-style attachment and bracket for mounting on seatpost - Runtime varies from 1.5–15 hours - 7 lighting modes - Output: 20 lumens - Extra mounting brackets sold separately - Mode memory: light automatically lights up in the last mode used - Weight: 18g
To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector that allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included for flexible mounting options. Features - Lumen Output: 100 - 4 Modes with a Run Time up to 136h - 2 x AAA Alkaline Battery Powered - Weight: 82g - Battery: 2 x AAA Alkaline - Highly Visible up to 1 Mile - 100 Lumen Daylight Visible taillight - Water / Dust Resistant IP64 Rated Run Time - Fast Flash—96:00h - Pulse Flash—136:00h - Steady High—72:00h - Steady Low—127:00h
Maximize your visibility with this amazing taillight. The SuperFlash aims 2 extreme LEDs plus a half-watt Blaze LED for light that can be seen for up to 1 mile! The ultra-compact case is weatherproof, light and durable. And, the SuperFlash includes a bike mount and clip mount for multiple mounting options. Plus, the 2 AAA batteries (included) offer run times up to 100 hours.
Take charge of the night! The HeadLux 100 USB features convenient cable-free charging with a direct USB port plug. Two super-bright 0.5W white LEDs provide up to 100 lumens with three light modes so you can see even on the darkest nights. Bi-directional tool-free mounting and removal are accomplished by a single silicone strap making it simple to use and a great value. - Max Lumens: 100 Lumens - Lamp: 2 super bright 0.5 W white LEDs - Light Housing: Engineering grade polymer - Battery: 3.7V 500mAh Lithium Ion (integrated) - Control/Burn Time (approx): 3 Modes / 1.5 hr (High) / 3.3 hr (Middle) / 40 hr (Blinking) - Charging: USB port / 2 hr (approx) - Mount: Fits integrated bar/stem combo, and aero / round handlebars - Waterproof IPX 6 - Low battery indicator - Size: 6.9 x 4.3 x 2.2 cm / 2.7" x 1.7" x 0.9" - Weight: 32g / 1.13oz
USB Rechargeable, super bright, compact, quick and easy - there's no reason not to grab a pair of ORB's for your next ride. Features - USB rechargeable - Simple, lightweight, and compact design - Easy installation and switch operation - Universal rubber band - Mount size: ~22-32mm Modes/Run Time - Constant: 2.5 hours - Rapid flashing: 5.5 hours - Slow flashing: 6 hours
This is the “Next Generation” of our compact and versatile fast-mounting bike lights. Their mission: to help cyclists boldly go where no cyclist has gone before. - High output surface mounted LED provides steady, Courtesy, and Superflash modes - FL1 tested run time: 4.5 hrs (steady – 5 lm), 7 hrs (Courtesy™ 1.5-4.5 lm) and up to 22 hrs (Superflash - 5 lm) - Side cut outs provide 270° of visibility - Dust & water resistance rated to IP54 standard - 270 mAh lithium polymer battery charges in 2 hours with micro USB cable (included) - Diminutive size and fast mounting rubber strap mounts to multiple mounting locations in seconds without tools - 25 grams
Put this little bright spot anywhere—your belt, your backpack, your seatpost—and ride on. The Flashback is your go-to savior, packing a mighty “I’m here!” punch to keep you visible on the streets. With its belt clip, you can literally clip it on just about anything, and its compact size makes it a total no-brainer for keeping your ride safe and your street-cred high. - Compact, bright, and waterproof. - Built-in fabric belt clip makes it a clip-anywhere taillight option (seatpost mount included). - Four operating modes: Steady (10 lumens), Power Flash (20 lumens), Disco Flash (14 lumens), Eco Flash (5 lumens). - 2- to 20-hour runtime, depending on mode. - Tested and approved for the following Specialized helmet models: Align, Ambush Comp, Chamonix, Propero II, Echelon II
The water-resistant Light Kit features a clip mount to install on your Burley trailer's light loop or bracket. The 5-LEDs shine bright with 4 modes (flashing, constant, chasing & random) to provide increased visibility day or night. - 5-LEDs - 4 modes (flashing, constant, chasing & random) - Includes: (1) Red Light & (2) AAA Batteries - Compatible with Burley trailers using a Light Bracket or Light Loop
German StVZO optimized lens with wide light spread. Two high-output LEDs provide 11 lumens. IPX7 water resistant rating. Composite matrix fender mounting system. E-bike compatible (6v input, 0.6w / 12v input 1.2w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm long power cable included. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included
For much of night riding, the key to survival is not only seeing but also being seen, the CherryBomb 35 addresses the latter. By incorporating a unique multi-directional collimator specifically designed for cycling, the CherryBomb 35 maximizes visibility by dispersing light to the sides of the rider as well as to the rear, effectively eliminating blind spots to upcoming automobiles. To further rider safety and visibility, the CherryBomb 35 employs a custom made, built in reflector which allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included, for flexible mounting options. - Daylight Visible Flash (DVF) - A wearable safety light – clip onto various straps, belt loops, etc. - Visible up to 1 mile - Internal reflector = visible if light on off mode - Easily replaceable AAA batteries - Super bright day time flash mode - Be Seen by cars = Be Safe - FL 1 Standard IP64, water resistant WARRANTY The CherryBomb 35 is backed by NiteRider’s lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light - Seatpost Mount - 2 AAA Batteries
Stand out at night! The Blinky 3H combines 3 bright LEDs with a parabolic reflector for up to a mile of visibility. And, its self-leveling helmet mount ensures optimum visibility as you ride. It also includes seatpost and seatstay mounts. The Blinky 3H has steady and flashing modes and runs for up to 100 hours on the included AAA battery. Also, this light includes a reflective lens and side reflective strips for extra safety.
-PB power array and reflector provide visibility for up to 1 mile -Steady, Superflash and Courtesy flash modes -Ultra compact case is weatherproof, lightweight, and durable -Rear rack and seat post mounts included -Up to 150 hours of run time on 2 AAA batteries (included) -85 grams
Maximize your visibility with this amazing taillight. The Blinky 7 aims 7 bright LEDs directionally to provide over 220 degrees of light visible from up to a mile away! The ultra-compact case is weatherproof, light and durable. And, the Blinky 7 includes a bike mount, clip mount and arm strap. Plus, the included 2 AAA batteries offer run times of up to 100 hours.
Portland Design Works' Red Planet Taillight will enhance your visibility after dark. It boasts five bright LEDs with three modes to notify others of your presence. And, the Red Planet includes mounts for a seatpost, seatstay, and backpack, so you can put it wherever you want. - Five red LEDs - Steady, blinking and dance modes - Stayputnik mount included - Runs on 2xAAA batteries (included) - Weatherproof exterior for all season riding - Weight: 45 g (1.6 oz)
Simple operation with three super-bright LEDs make the RedBat your go-to taillight for being seen. Solid and flashing visibility options for day and night riding. - 3 LEDs under a red lens (1 lumen) - 4 functions: steady, flashing, chasing, random - 19–40mm diameter bracket - Also works clipped to a bag/waistband - 2 AAA batteries included - Runtimes/Modes: 70 hours in Solid mode, and 160-250 hours in Flashing mode
Planet Bike's Spok Taillight ensures you'll be seen for up to a mile! It boasts a super-bright LED and a translucent casing that allows 220 degrees of visibility. The rubber strap can be used to mount the Spok on seatposts or odd shaped tubes of all sorts and sizes. And, this little baby runs up to 100 hours with the included CR 2032 battery. There's even a keychain hole for portability!
Replacement LED assembly for the Centro LED helmet.
The TL 6.0 will help keep you safe and seen from behind (210-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash. Features - Lumen Output: 25 - 4 Modes with a Run Time up to 60h - 2 x AAA Alkaline Battery Powered - Weight: 70g - Battery: 2 x AAA Alkaline - Increased safety with 210° of Visibility - Budget Friendly Rear Lighting System - 25 Lumen taillight with Eye Catching Flash Patterns - Water / Dust Resistant IP64 Rated Run Time - Up to 60h
Long battery life combined with simple, tool-free mounting makes MSW Mouse lights a great economical pick to be seen on the road. - Simple, tool-free mounting on bars from 22.2 - 35mm - 3 lighting modes: high, low, flash - CR2032 battery included
Make sure you have excellent rear visibility at night with the Blinky 3. This sweet taillight aims 3 bright LEDs directionally to provide visibility from up to a mile away. Its soft-touch power switch accesses flashing or steady modes for up to 100 hours of run time on the 2 AAA batteries (included). And, it includes seatpost and seatstay mounts.
Previous page Page 2 of 2