Whisky's No.9 24f Carbon Drop Bar is designed for comfort and control in challenging situations. Specifically aimed at long distance touring, gravel, or off-road pursuit, the 24-degree flare offers huge control from the drops. Full carbon construction offers a light, stable platform while reducing vibration and adding comfort. This thoroughly modern drop bar is the perfect match to your off-road tourer, monstercross bike, or get-rad CX rig. The 24f’s sleek design offers seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs. - Carbon - 220g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 24° - Measured Center-to-Center at the levers
Woodchipper is Salsa’s signature drop bar for off road riding, where its unique shape delivers comfort and control no matter how rough the terrain. Woodchipper Bars bend along three planes to create extra-wide lowers while still maintaining a shallow drop. - Ergonomic design works well with integrated road shift/brake levers or bar end shifters - 114mm drop, 56mm reach, 25° flare angle, 38° drop angle - Available in 42, 44, and 46cm widths - 31.8mm clamp diameter with 140mm width for use with Salsa Anything Cradle and aerobars - The Woodchipper’s non-conventional shape requires a unique setup for optimal comfort. The brake/shifter position should be canted downward slightly, resulting in a 20–25° downward angle of the drops. - Weight: 230g (44cm)
Zipp's SL-70 Aero is, in every way, a high-performance bar. This unidirectional carbon handlebar is packed with innovations for best-in-class fit, ergonomics and aerodynamic performance. With its wing-shaped bar top, the SL-70 Aero features Zipp’s most advanced bar refinements while building on the trend-setting aero legacy of the VukaSprint. Beyond aero performance, the SL-70 Aero features a 70mm reach to allow proper fit without compromising stem length and steering control. The 10-degree ramp angle to the brake hoods eliminates the need for up-rotated bars. The bar also provides ample wrist clearance for riding and sprinting in the drops. - Unidirectional carbon construction - Airfoil top bar reduces drag by .63 Newtons over traditional round tube - Drops angled out 4 degrees with 10 degree ramp angle - Features Zipp’s Rapid Routing system, also used in the Vuka Aero system, for easy internal cable routing. UCI legal. - Compatible with all mechanical brake/gear systems and all electronic gear systems. - Not clip compatible.
The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it. - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - 35mm bar diameter for incredible strength/weight ratio
Zipp's stalwart Service Course SL 80 handlebars now have an option for those who prefer an ergonomic flat top. The new Service Course SL 80 Ergo retain the same 80mm reach and 125mm drop of the existing Service Course 80 bars, perfect for a rider looking for a medium reach and shallow drop who likes reaching down to, rather than into, the drops. New is the flattened bar top and a 3° backsweep for a neutral wrist position on the tops. The bars feature a 7° ramp angle for a flat transition to the hoods and a 4° outsweep at the drops. In addition to the ergonomic benefits, the Service Course SL 80 Ergo are our first ergo bars to be clip-on compatible. Made of 7050 aluminum, the Service Course SL 80 Ergo weighs 275g for a 42cm-wide bar. It is available in High Polish Black, which features white logos on gloss black background, or Beyond Black, with a subtle matte black logo on the gloss black bar. Light weight, stiffness, and comfort: the Zipp Service Course line provides the right fit for all rider types. - 7050 aluminum for light weight and durability - 80mm reach and 125mm drop for a medium-high position - Flattened top shape to better fit the hand - Clip-on Compatible - Affordable - Di2 RS910 junction compatible - ISO 4210 compliant. See Declaration of Conformity for details. - Flat transition to hoods - Short reach to brake levers - 3° backsweep for wrist comfort - Anatomic drop shape - Flattened top shape to better fit the hand
Woodchipper is Salsa’s signature drop bar for off road riding, where its unique shape delivers comfort and control no matter how rough the terrain. Woodchipper Bars bend along three planes to create extra-wide lowers while still maintaining a shallow drop. - Lightweight and strong 7050-T6 series aluminum alloy construction - Ergonomic design works well with integrated road shift/brake levers or bar end shifters - 114mm drop, 56mm reach, 25° flare angle, 38° drop angle - Available in 42, 44, and 46cm widths - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - The Woodchipper’s non-conventional shape requires a unique setup for optimal comfort. The brake/shifter position should be canted downward slightly, resulting in a 20–25° downward angle of the drops. - Weight: 329g (44cm)
The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package. - Unidirectional carbon fiber construction - 35mm stem clamp - 8 degrees of backsweep with 5 degrees of upsweep - Trimmable ends, made easy with graphic markings - Rated to ASTM Condition 4 for extreme off-road riding
DH / Freeride / All Mountain Chromag utilizes the 35mm clamp size to create a wider, stronger bar in the same weight class as its 31.8 counterpart - the Fubars OSX. The OSX 35 is made from 7000 series aluminum. It provides the best strength to weight ratio possible. This is a strong bar best suited to DH/Freeride or trail riding. At 800mm it is our widest aluminum bar. Same perfect fit as the original OSX, with 25mm rise, 5-degree upsweep and 8-degree back sweep.
The short reach, shallow drop, and feathery weight of Ritchey's SuperLogic Carbon Evo Curve Road Bar make it a favorite among cyclists looking to build their dream bike. This Evo model has a 4-degree sweep on the tops for exceptional ergonomic comfort. Monocoque carbon construction gives you strength and stiffness as well as vibration damping for long-ride comfort, all at a weight that is worthy for even the lightest super bikes. Plus, this stellar bar is compatible with clip-on aero bars, and the stem- and brake-clamp regions are textured for a super-secure hold.
Zipp’s Service Course SL-80 bars keep the drops close and within reach, and because they’re angled outwards by 4 degrees, your wrists remain in a strong, natural position. This lets you get low and aero without compromising comfort or control. Zipp left the transition from the tops to the brake hoods flat so you can ride comfortably, even in a more upright position. Stiff and light for uncompromising strength and climbing prowess, these aluminum bars are ready for anything.
Ritchey Classic components are high-polished silver to accentuate a special build that requires a classy touch. EvoCurve is a short and shallow compact drop bar with an oversized comfortable top section. - 6061 aluminum - Width measured at the hood - Bar Clamp Diameter: 31.8mm - Bar Drop: 130mm - Bar Reach: 80mm - Bar Top Style: Round - Accessory Mount Diameter: 31.8 - Drop Bend Style: Compact - Cable Routing: External - Clip-on Compatible: Yes - Flare: 4
The Service Course SL-70 is the bike fitter's go-to bar. The short reach to the hoods allows a proper fit without compromising stem length and steering control. With the revised ramp angle, proper fit is now achievable on even the most challenging setups. The 70mm reach is the shortest of Zipp's new Service Course bars, at 128mm of drop. Whether it's a rider with a shorter torso or a bigger rider getting aero by pairing this bar with a long stem, this bar helps put just about any cyclists into his or her optimal position. The SL-70's flattened top provides a better fit to the hand and is clip compatible. - 7050 aluminum for light weight and durability - 70mm reach and 128mm drop for a short-low position - Flattened top shape to better fit the hand - Clip-on Compatible - ISO 4210 compliant. See Declaration of Conformity for details. - Ramp angle: 10° - Outsweep: 4° - Backsweep: 0° - Drop shape Variable - Clamp width 120mm
Improving on the original S-Works Aerofly, the S-Works Aerofly II takes the knowledge of countless Win Tunnel hours and transfers it into handlebars that are not only fast (you save around 20+ seconds over 40k), but that also have a myriad of features that make them comfortable. Starting with the tops, you'll find a textured surface that ensures your hands stay in place even when it's wet, plus there's a step that makes bar tape even with the tops of the bars for both comfort and a clean look. Next up, we took feedback from our World Tour teams and pushed the airfoil forward, and this ensures more forearm and knee clearance. And finally, we made the Aerofly II lighter. In fact, at a mere 235 grams in size 42cm, it’s the lightest aero road bar in its category. Consider it aero without compromise. - Win Tunnel Engineered to save 20+ seconds over 40km vs a round bar - FACT Carbon construction yields lightest-in-class aero bar at 235g (size 42cm) - Innovative features, like textured tops and a smooth bar tape step, enhance your experience - Designed for internal brake and shifter cables—electronic compatible - Bar width (center-to-center): 40/42/44cm - Bend: 40/42/44cm—130mm drop x 80mm reach; 38cm—125mm drop x 75mm reach
Whisky's No.7 24f is designed for comfort and control in challenging situations. Specifically aimed at long distance touring, gravel, or off-road pursuit, the 24-degree flare offers huge control from the drops. This thoroughly modern drop bar is the perfect match to your off-road tourer, monstercross bike, or get-rad CX rig. The 24f’s sleek design offers seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs. - 7050 Alloy - 282g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 24° - Measured Center-to-Center at the levers
A race-proven handlebar, the M9 bar is ENVE's dedicated downhill option. Designed around a 31.8mm clamp diameter and a downhill-focused flex profile, this bar’s celebrated ride feel defined the potential of a DH carbon fiber bar and realigned performance expectations. The M9 bar features 8-degree backsweep and 4-degree upsweep. - Material: Carbon - Weight: 245g (30mm rise); 265g (50mm rise) - Bar Width (Max): 810mm - Bar Width (Min): 780mm - Clamp Diameter: 31.8mm - Backsweep: 8 Degrees - Upsweep: 4 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm
FSA's K-Force Compact Road Handlebar features a racy compact design for improved ergonomics and rider comfort. Its continuous carbon/Kevlar construction is super light and impressively stiff, making it perfect for climbing and big out-of-the-saddle efforts. It also has a 110mm center section for mounting accessories and its reinforced, textured clamping areas hold tight and secure.
The Salsa Cowbell blends speed, comfort, and efficiency for high performance efforts on gravel and paved roads. Designed with gravel racing and riding in mind, Cowbell bars feature a 12° flare that puts your hands, wrists, and arms into a natural, comfortable position in the drops. - Lightweight and strong 6061-T6 aluminum alloy construction - 115mm drop, 68mm reach, 12° flare angle, 12° drop angle - Available in 38, 40, 42, 44, and 46cm widths - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - Weight: 314g (44cm)
The VukaClip is all about providing the ultimate in fit, security, and adjustability for you to be faster and more efficient in your triathlon or time-trial aero position at an affordable price. Redesigned to be easier to set up and adjust. The VukaClip is available with an above-bar or below-bar mounting system for achieving an optimized aero position. The VukaClip also has a large, redesigned armrest to reduce pressure points and increase comfort. The VukaClip is made with the industry-standard 22.2mm clamp diameter for maximum versatility, making it compatible with Vuka Alumina extensions, the Vuka Carbon Extensions as well as most extensions on the market. Features - Fit, security, and adjustability - Above-bar or below-bar mounting system - Compatible with most extensions
Get low with Zipp’s Service Course SL-88 bars. Their longer reach provides an extra aero advantage in the drops, and because they’re angled outwards by 3 degrees, your wrists remain in a strong, natural position. The ends of the drops are flat to reach straight down upon; this also helps keep your hands locked in place during sprints. Zipp paid attention to detail and crafted the transition from brake hood to the tops perfectly, ensuring a comfortable, ergonomic position wherever you choose to grasp. Stiff and light for uncompromising strength and climbing prowess, these aluminum bars are ready for anything.
Remember those great Belleri Porteur bars from France? Of course Belleri is long out of business, but those handlebars are still sought-after. So, Velo-Orange decided to make their own Porteur bars. They are 480mm wide; reach is 140mm. The grip area is about 130mm, and they have about 15mm of rise or drop. The clamp area is 25.4mm. The quality and polishing are very nice. The transition from the grip to the curve on the originals was a bit abrupt; The Velo-Orange version has a gentler transition. The curves on both versions are fuller and, we think, prettier than the somewhat similar Champs Elysées bars used on the old Herse bikes. These bars are available in two tubing diameters, 23.8mm road-sized and 22.2mm mountain bike-sized (clamp area is 25.4mm on both): - 22.2mm diameter (MTB-size) bars accept MTB brake levers and clamp-on shifters. They do not work with bar-end shifters. The only inverse levers that work are Dia Compe levers in the 22.2mm size. - 23.8mm diameter (road-size) bars accept standard inverse brake levers, standard bar end shifters, and 23.8mm city brake levers. In short, anything made for road bars fits. They do not accept MTB levers or shifters.
Upgrade your bike with FSA's Omega Road Handlebar. The double-butted, tapered and shot-peened aluminum construction makes this bar light and durable. It also features an ergonomic curve for comfort and a variety of hand positions. Plus, the Omega even sports a groove that makes cable routing easy.
- DH Race tuned award winning alloy handlebar design, developed with World Cup professionals - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Increased strength and stiffness compared to conventional alloy bars - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm - KEY TECHNOLOGIES: Vibrocore, Dual XGT, CNC Bending, Impact Ends, MGR Super 6 Alloy - MATERIAL: MGR Super 6 Alloy - WEIGHT (g): ±340 (15mm) / ± 350 (30mm) / ±360 (50mm) - DIAMETER (mm): 31,8 - RISE (mm): 15 / 30 / 50 - LENGTH (mm): 800 (adjustable to 740) - GEOMETRY (deg°): 4° up x 8° back - FINISH: Shot peen anodized, decal logos
- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.
Race Face Atlas riser handlebar with an anodized, shot-peened finish. - Aonodized, shot-peened finish - Cold-drawn and butted proprietary AirAlloy aluminum tubing - 4 degree upsweep
$75.00 - $80.00
Whisky's No.7 12F is their most versatile drop bar. It's equally at home on tarmac, gravel or twisty cyclocross courses. From touring to racing, this modern bar is a great addition to almost any bike in your stable. The comfortable 12-degree flare provides excellent control and comfort, especially off-road, or in challenging conditions. A semi-compact design offers seamless transitions between positions. Available in a complete size range, this bar is a perfect fit for any rider. - 7050 Alloy - 282g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 12° - Measured Center-to-Center at the levers
Easton’s new AX series line of bars meets the needs of the growing drop bar adventure and gravel segment. Building off the highly successful and critically acclaimed line of new MCD road bars and EA70 and EC70 AX bar utilizes the same top shape and reach as well as the ergonomic drop shape but turns up the drop flare from 4 degrees all the way up to 16 degrees. The wider stance in the drops provides more control on rough terrain and long gravel assaults. Why 16-degrees? Based on extensive testing and rider feedback we determined that 16 degrees was the perfect balance of maximum bar flare that still allowed for efficient access and usage of the shifters and brakes in both the hoods and drops. - Width (center-to-center): 40cm, 42cm, 44cm, 46cm (+68m at drops) - Flare: 16-degrees - 42cm: 220g - Clamp diameter: 31.8mm - Reach: 80mm - Drop: 120mm - Materials: EC70 carbon
Profile's Ultra FR is a tough riser bar that gives you extra control in technical sections and confidence on rough descents. It's made of double-butted 6061-T6 aluminum, which offers superior strength and stiffness and weighs next to nothing.
The standard for which Ritchey performance is based on. Race-worthy components priced for the casual cyclist. - Double butted 6061 alloy construction - Gentle sweep for ergonomic performance - Bar Clamp Diameter: 31.8mm - Rise: 5mm - Weight: 276g
The Airwing has a deep drop to keep you in a wind-cheating aero tuck, making this a perfect base bar for triathlons and time trials. Made from double-butted 6061 aluminum, the Airwing is super light and boasts a wide clamping section that will accept any Profile Design clip-on aero bar. Plus, it's shot peened and anodized for added strength and durability and pre-drilled for internal cable routing for aerodynamics and a clean look.
- Intended use: XC and Trail - Proven design and durability of the Race Face Next SL bar with increased stiffness and lighter weight of the 35mm platform - Manufactured from UD Carbon with matte clearcoat - Requires 35mm bar clamp diameter stem - 8 degree rearward sweep, 5 degree upward sweep
Page 1 of 4 Next page