Other

The Problem Solvers Clamp-On Water Bottle Cage Mount makes it easy to carry a bottle on your handlebars so you can have even more refreshment on rides. It also comes in useful on frames without room for bottles, like smaller frames and some kid’s bikes.

The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.

ReMatch adapters are designed to integrate different generations of Shimano Brakes to Shimano Shifters. Rematch Adapter 1.1 connects Shimano I-Spec A/B shifter to I-Spec II brake. - Made from CNC Machined T6061 Aluminum - Anodized Black - No additional hardware needed ReMatch 1.1 is NOT compatible with Deore M610 or SLX M670 shifters

One of the coolest things about Surly is if they can't find an existing part that fits their standards, they just make one themselves. This cable hanger is made to fit around the oversize bolt on their Constrictor seatpost clamp so you can be sure it will fit around almost any other seatpost clamp bolt too. It comes complete with an adjusting barrel.

Whether for derailleur clamp clearance, tire clearance, or personal preference, sometimes it can be advantageous to run the wheel further back in the dropouts. Monkey Nuts install into Surly horizontal dropouts to make spacing the wheel back easy. There are 3 different sets depending on the type of dropout and axle configuration the dropout is intended for. Simply select the correct version of Monkey Nut, install it into the frame, and slam the wheel all the way forward. Bang, done.

The SRL lever gives riders with 1x drivetrains the option to control their Command Post with lever option that mounts beneath the bar in place of a front shifter. - Command Post lever for the modern 1x drivetrain systems. - Adjustable lever position allows for the perfect set up. - Sealed cartridge bearing pivot for smooth action. - Ideal pull ratio for easy lever activation. - Requires additional mounting hardware (SRAM MatchMaker or equivalent is recommended).

The SRL LE lever gives riders with one-by drivetrains an affordable option to control their Command Post with a lightweight lever option that mounts beneath the bar in place of a front shifter. - Command Post lever for the modern one-by drivetrain systems. - Injection molded lever is light, durable, and features a textured design for added grip. - High quality bushing design provides smooth lever action. - Ideal pull ratio for easy lever activation. - Requires additional mounting hardware (SRAM MatchMaker or equivalent is recommended).

If you're suffering from a slipping seatpost, Surly has the remedy. The Constrictor Seatpost Clamp grabs your post tight and hangs on for dear life. It's machined from anodized aluminum billet, uses an 8mm bolt for ultimate strength, and can accommodate a rear cantilever brake hanger.

Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No

Replacement derailleur hanger for Specialized Diverge, CruX and Roubaix Carbon with Specialized SCS 135x12 thru-axle system. All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M5x10 Socket head screw included

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (2) M3x8 Flat head screws included - Cannondale Hanger #KP284

Replacement guard for the Halfbash sprocket.

Shimano Deore XT M8000 Rear Derailleur Bracket Axle Unit - "B" fit for SLX RD-M7000-11

Hardware is specifically designed for, and only compatible with, Salsa frames using the Alternator 2.0 dropout system. - For use on 2017 and newer alternator 2.0 Adjustable plates only - Please reference hardware kit FS2351 for fixed position plates - Please reference hardware kit FS2350 for adjustable plates

I-SpecBar Clamps are a one-piece hinged clamp adapter that allows users to mount I-Spec compatible shifters or dropper levers onto the handlebar, without requiring an I-Spec brake lever. - Sold individually, the clamp can be mounted to the right or left side - Hinged clamp for easy installation without removing other components - Black Anodized, CNC AL-6061 Aluminum - Compatible only with Shimano I-Spec II compatible shifters or dropper post remotes - 23g

Consider this the cherry on top of your sundae. Pull the whole thing together with an All-City top cap. - Includes star nut

K-EDGE MTB Chain Guide is built to be the strongest and lightest solution to withstand the pedaling force of a derailed single ring chain in World Cup race conditions. - Full-cage design for chain retention under the most abusive cross situations - Braze-on mount and braze-on adapter clamp compatible - Fully adjustable for height, center-line, and angle - Optimized for 10 and 11spd drivetrains - CNC Machined from 6061-T6 Aluminum (no plastic parts) - Stainless Steel Hardware - Weight: 60.8 grams (excluding braze-on adapter clamp) - Compatibility: Single-ring bikes; frames with integrated braze-on front derailleur mount; also compatible with braze-on adapter clamps. All necessary hardware included - Optimized for 34T to 44T Chain Rings - “Hard to fit kits” may be needed for current applications, please contact Info@k-edge.com - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded

Zipp Speed Weaponry Vuka / Stealth Riser Kit - Bolt kits sold separately

Zipp Speed Weaponry Aero Bar Parts - Armrest pads are not included

The perfect bike fit needs to blend slippery aerodynamics and a comfortable, stress-free body position while optimizing control over the bike. Top fitters are constantly devising new methods to maximize and balance these goals. Designed using feedback from top fitters, Zipp’s Vuka Carbon Extensions give you all the options needed to optimize your position and go for the win or your personal best: Vuka Carbon Evo 70 and 110 extensions Vuka Evo extensions decrease drag by starting airflow over the body sooner while keeping the arms and wrists in a comfortable, relaxed position. The Evo shape, with a 20mm inward roll and multi-radius bend, is now available for the first time in carbon, allowing for even more complex shaping and lighter weight. Vuka Race Carbon Extension The Vuka Race Carbon Extension was designed using data compiled from thousands of fit sessions with recreational and professional cyclists and triathletes by the world’s best fitters. The Vuka Race bend places the wrists at a more natural bend to help riders remain in their tuck to optimize aerodynamics. - Compatible with Vuka Clip, Vuka Aero and all 22.2 systems - Internal cable routing

- Includes 61803 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - Note: 88 front and 188v9 rear hubs are on all 2014 and newer Zipp 202, 303, 404, 808 - One kit required for: Zipp 88, 30 and 60 front hubs Zipp 188v8 rear hubs Zipp ALL free hub driver bodies - These 61803 bearings are not interchangable with the 77/177 hub 61803 bearings

Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip. Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.

ReMatch adapters are designed to integrate different generations of Shimano Brakes to Shimano Shifters. Rematch Adapter 1.2 connects Shimano I-Spec A/B brake to I-Spec II Shifter. - Made from CNC Machined T6061 Aluminum - Anodized Black - Includes all necessary hardware for both I-Spec A and I-Spec B brake - No additional hardware needed

- Replacement pull-up spring for the Surly Chain Tensioner

Replacement spacer pack for Wheels Mfg. 29mm spindle (SRAM DUB) bottom brackets. Bearings sold separately. Pack Includes: - (2) - Silicone Dust Seal, 29mm ID, 42mm OD - (2) - 0.5mm, 29mm ID Crank Spindle Spacer - (2) - 1.0mm, 29mm ID Crank Spindle Spacer

The Super Booster rear hub spacer kit is designed to give your 148mm rear thru-axle hubs the extra boost they need to fit any 157mm frame.

A perfect complement to your ENVE cockpit and fork. The ENVE compression plug keeps your ride straight as an arrow and looking good.

The Problem Solvers Micro-Adjustable Headset Spacer goes on the fork (it requires 10mm of clearance on the steerer) and locks in place to retain your headset bearing adjustment. This makes it possible to run your fork and headset without a star nut or compression plug. This 2-part threaded component is made of CNC-machined aluminum with a small bolt for tightening, so it's light and durable.

The Problem Solvers Self-Extracting Crank Bolts take the place of the existing bolts in Shimano/Octalink, Race Face ISIS, and M15-compatible cranksets to let you remove your crankarms with only an 8mm Allen wrench instead of special tools. A 10mm Allen wrench (sold separately) is used to install these fine aluminum self-extractors.

- Replacement bar donuts for cobrafist pogies