Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

Campagnolo Super Record 12x2 Speed Crankset
$995.00
The new Super Record 12x2 Speed crankset: an intense concentration of innovation that results in the greatest possible stiffness and precision in derailing, whilst providing a dedicated aerodynamic “super design." The new carbon fiber Super Record 12x2 Speed crankset has been made lighter on the inside through Campagnolo Hollow Technology, which uses the Ultra-Torque bracket system with a titanium axle to transfer all of the force the athlete applies to the pedal to the drivetrain. The new Super Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters, without affecting the Q factor, which remains constant at 145.5 millimeters thanks to the new hand crank design. The use of ceramic Cult bearings leads to obtaining the smooth ride that the Campagnolo brand is known for. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) combined with the eight fixing screws, optimize weight and stiffness through the increased use of carbon fiber. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.
Cane Creek 10-Series Interlok Headset Spacer
$1.00
Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction
Cane Creek 1-1/8-inch Headset Shim Spacer
$1.08
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
Cane Creek Shock Spring Converter Clip
$7.75
- Enables Double Barrel springs (1.43" ID x 2.10-2.19 OD) to be run on other brand shocks
Cane Creek DB Volume Reduction Spacer Kit
$9.00
Installation of air volume reducers for Cane Creek shocks make the spring rate more progressive. - Spacers can be cut to fine-tune spring curve
Cane Creek Non-Aero Brake Lever Hoods
$10.82 - $10.99
• Replacement hoods for road brake levers with traditional, non-aero cable routing • Soft, tacky rubber for a sure grip • Available in black or brown
Cane Creek Interlok Spacers
$11.00 - $12.99
- color-matched aluminum Interlok Spacers for Cane Creek headsets
Cane Creek SCR5 Brake Lever Hoods
$11.00
• Replacement hoods for Cane Creek SCR5 brake levers • Soft, tacky rubber for a sure grip • Available in black or gum
Cane Creek Crown Race
$12.00 - $14.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Durable steel construction
Cane Creek 40-Series Headset Top Cover
$14.00
Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values. - Bearings not included - Stack height: 9mm
Cane Creek Aheadset EC34 Threaded Headset
$23.00
Cane Creek's Aheadset is a simple, affordable solution for your headset needs. • Bearing Type: Cup and Cone • Color: Black • Crown Race: 30 • Defined Color: Black • Lower Stack Height: 12 mm • S.H.I.S Lower: EC34 • S.H.I.S Upper: EC34 • S.H.I.S. Stem Clamp Diameter: 28.6-26tpi Quill • Upper Stack Height: 22 mm • Weight: 205 g
Cane Creek AER Norglide Bearing
$24.00
- Replacement Norglide bearing for the upper cup of Cane Creek AER headsets - Bearing I.D. (mm): 30 mm - Bearing O.D. (mm): 41 mm - Bearing Type: Cartridge - Cartridge Bearing Angle: 36x45 - Thickness: 6.5 mm
Cane Creek Hellbender Headset Bearing
$24.00 - $49.00
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.
Cane Creek Aheadset EC30 Threadless Headset
$24.99
Cane Creek's Aheadset is a simple, affordable solution for your headset needs. • Bearing Type: Cup and Cone • Color: Black • Crown Race: 26 • Defined Color: Black • Lower Stack Height: 12 mm • S.H.I.S Lower: EC30 • S.H.I.S Upper: EC30 • S.H.I.S. Stem Clamp Diameter: 25.4 • Upper Stack Height: 18 mm • Weight: 163 g
Cane Creek 10 ZS56 Headset Bottom
$25.50
Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out. • Technical Description: ZS56/40/H4/K • Bottom Type: ZS - ZeroStack • Bottom Head Tube Inside Dia.: 55.95mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Polymer • Bottom Stack Height: 4mm • Bottom Bearing Type: Black Oxide • Material: 6061 aluminum • Weight: 35.35g
Cane Creek Aheadset IS41 Headset
$26.50
Cane Creek's Aheadset is a simple, affordable solution for your headset needs. • Bearing Type: Cartridge • Color: Black • Crown Race: 30 • Defined Color: Black • Lower Stack Height: 2 mm • S.H.I.S Lower: IS41 • S.H.I.S Upper: IS41 • S.H.I.S. Stem Clamp Diameter: 28.6 • Upper Stack Height: 7 mm • Weight: 65 g
Cane Creek 40 IS52 Conversion Headset Bottom
$30.50
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS52/30/H1 • Bottom Type: IS - Integrated • Bottom Head Tube Inside Dia.: 52.1mm • Crown Race Seat Dia.: 30.015mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 1mm • Bottom Bearing Type: Black Oxide, Sealed • Material: N/A • Weight: 72g
Cane Creek 40 Series Integrated Bottom Bearing
$30.50
This is the Integrated Bottom Bearing for the Cane Creek 40 Series headset. Please contact us if you have any questions about which parts are correct for your headset.
Cane Creek Cross Top Brake Levers
$35.00
Add another braking option to your road or cross bars with Cane Creek's Cross Top Brake Levers. They are a great way to gain more control on technical cyclocross courses by enabling braking from the tops of the bars.
Cane Creek 40 IS41 Headset Top
$36.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS41/28.6/H9/K • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 41.1mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 37g
Cane Creek 40 IS42 Headset Top
$36.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS42/28.6/H9/K|IS42/30/H1 • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 42.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 72g
Cane Creek 40 Series ZeroStack Top Cover
$36.00
This is the Top Cover for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.
Cane Creek 40 EC34 Headset Top
$36.50
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: EC34/28.6/H16/K • Top Type: EC - External Cup • Top Head Tube Inside Dia.: 33.95mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 16mm • Top Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 50g
Cane Creek 40 Series ZeroStack Bottom
$42.00
This is the Bottom for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.
Cane Creek 40 ZS49 Conversion Headset Top
$42.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS49/28.6/H8/K • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 49.61mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm • Top Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 57g
Cane Creek 40 ZS56 Conversion Headset Bottom
$42.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS56/30/H4/K • Bottom Type: ZS - ZeroStack • Bottom Head Tube Inside Dia.: 55.95mm • Crown Race Seat Dia.: 30.015mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 4mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 88g
Cane Creek 40 EC44 Conversion Headset Bottom
$43.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: EC44/40/H12/K • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 44.00mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 65g
Cane Creek 40 Series Bottom External Cup
$43.00
This is the Bottom External Cup for the Cane Creek 40 Series headset. Please contact us if you have any questions about which parts are correct for your headset.
Cane Creek Ergo Stoker Levers
$43.00
Install Cane Creek's Ergo Stoker Levers on your stoker bars and give your co-pilot a comfortable place for their hands. The ergonomic design ensures long haul comfort.
Cane Creek SCR-5 Brake Levers
$43.50
Put your hands on Cane Creek's SCR-5 Brake Levers. With comfortable hoods and lightweight aluminum levers, the SCR-5s are the perfect choice for your non-geared bike. There's a brake release button on the lever which facilitates easier wheel changes.