Stronger, stiffer, and lighter than ever; that is exactly what you can expect with the Quarq DUB crank arm assembly. Paired with the DZero or DFour DUB power meter spider and the DUB bottom bracket, the Quarq DUB crank arms assembly builds a power meter that can handle the toughest of conditions. - Only compatible with Quarq DZero DUB and DFour DUB power meter spiders - Does require a SRAM DUB bottom bracket
The SRAM RED AXS Crank Arm Assembly features hollow carbon Exogram crank arms for a lightweight, strong, and elegant crank. It can be paired with any SRAM AXS spider or integrated chainring, with or without power. - The 8-bolt interface is compatible with power and non-power AXS spiders and integrated chainrings - Not compatible with SRAM's 3-bolt direct mount interface - Hollow Exogram carbon arms - Spider and chainrings sold separately - DUB spindle interface - Compatible with all SRAM Road DUB bottom brackets - Number of Chainrings: No Rings, No Spider Included - Crank Intended Use: Road, Tri, Cyclocross - Pedal Spindle: 9/16" - Spindle Interface Type: SRAM DUB - Chainring BCD: Direct Mount SRAM - BB Included: No
Campagnolo is all about drivetrain evolution, and their Chorus Crankset proves it. The full-carbon cranks and 4-arm spider feature a unified bolt pattern that allows for all three chainring standards. This design incorporates an 8-bolt pattern with a spider arm that not only holds the chainring in place by way of the bolt, but also supports the chainring to increase system rigidity. The crank arms and spider are hollow for maximum stiffness and minimal weight. The integrated Ultra-Torque spindle joins the crankset together via a toothed Hirth joint in the center. - Chainring BCD: Campagnolo 146 Asymmetric, Campagnolo 112 Asymmetric
Shimano's Deore Crankset features efficiency and fast shifting to let you make the most out of the trails. The smooth shifting rhythm allows you to maintain speed and acceleration over challenging terrain. Hollowtech II technology provides the best balance of stiffness, strength, weight, and rotating performance. Features: - Efficient power transfer - HOLLOWTECH II crank arm with 4-arm construction - Composite chainring - Optimized gear combinations and ratios for trail riding - Close step tooth profile for smooth shifting - Stable shifting performance in any suspension position - Single spike structure for stable shifting - Bottom Bracket compatibility: SM-BB52/BB-MT500-PA - Chain Line: 51,8
$164.00 - $183.00
SRAM's Rival 22 performs on par with more expensive cranksets, but at a bargain value. The crankarms are hollow and forged from 6066 aluminum for maximum strength with minimum weight. Because lightness is nothing without toughness, the Rival crankset proudly boasts SRAM's X Glide R chainrings that are specifically designed for use with the Yaw front derailleur. Durability and reliable shifting are your allies with Rival 22.
$999.95 $1,150.00 13% Off
No matter your skill level or experience on the bike, there's no better way to enhance your training and racing performance than by riding with a power meter. Lucky for you, Specialized has combined their incredibly light and stiff carbon fiber S-Works road cranks with dual-sided power measurement, making it the lightest (440g/172.5mm) and most accurate power meter available. The development of Power Cranks began with Specialized's Human Performance Team looking at riders in realistic scenarios on the bike. Historically, power meters have been validated by two different methods—one is by measuring the produced torque by applying a static, linear load to a crankarm or chainring, while the second uses a power generating motor to pedal the bike. Well, cycling is neither static nor linear, and humans apply power much differently than a machine. So, they found that neither of these methods answer the "real-world" accuracy question. To get the best test for accuracy, in all types of riding scenarios, Specialized built their own cycling treadmill, the WinMill, to measure power output to a known truth. This new benchmark lets them evaluate accuracy under all riding conditions—seated versus standing, various power and cadence levels, different weights, and a myriad of gear. This data acquisition process is their gold-standard for testing power meters, and through their testing and external validation from the Locomotion lab in Boulder, Colorado, Power Cranks have been proven to have the highest accuracy in real world scenarios (+/- 1.5%). The Dual-Sided S-Works Power Cranks utilize separate strain gauge systems to individually measure the effort produced by each leg. This maximizes the accuracy of your total power numbers, plus it helps you to better understand your performance as fatigue increases and when you're recovering from injury. And with class-leading temperature compensation firmware and waterproof enclosures, Power Cranks are easy to live with. Calibration is only required during seasonal-type fluctuations in temperature, and the included wrench makes battery swaps a breeze. - +/-1.5% real-world accuracy tested on the WinMill and validated by the Locomotion Lab in Boulder, CO. - Independent, dual-leg power measurement. - Works with ANT+ and Bluetooth devices. - Easy set-up and diagnostics with the Specialized Power app. (iOS and Android versions available). - Hollow carbon crankarms, carbon spider, and oversized alloy spindle offer superior stiffness and lighter weight than the competition—440 grams for 172.5mm crankarm length. - Fits Specialized road frames with OSBB or PF30 bottom bracket shell, as well as most BB30 road frames. - 110 BCD carbon spider (also compatible with 130 BCD carbon spider—sold separately). - Compatible with Shimano and SRAM drivetrains. Chainrings are sold separately. Use only with Specialized/Praxis chainrings 06217-1702 (52/36T) and 06218-1713 (50/34T). - Available in 165-180mm crankarm lengths.
The Easton EC90 SL crank utilizes CINCH technology which allows for direct mount 1x rings as well as direct mount 2x spiders, and industry-leading versatility. Easton refines the design for larger ring applications with improved chain retention while reducing running noise and friction. - EC90 SL carbon arms feature hollow carbon construction, while the 30mm spindle and pedal inserts features high-grade aluminum - CINCH direct mount technology is compatible with both 1x and 2x setups - Bottom bracket and chainrings sold separately - CINCH removable spiders and direct mount rings utilize a 20-tooth ISIS BB tool for removal and installation - Number of Chainrings: No Rings, No Spider Included - Chainline/Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay, 135/142 Road Disc Hubs < 415 mm Chainstay - Crank Intended Use: Road, Cyclocross - Pedal Spindle: 9/16" - Spindle Interface Type: RaceFace/Easton CINCH - Drivetrain Speeds: 10, 11 - BB Included: No
Shimano XTR M9100 cranks feature a lightweight and rigid design thanks to Hollowtech II crank construction. Chainrings can be easily exchanged with the direct mount system and one key release. - Single front chainring set up (chainring not included) - Gear tooth profile designed for MTB riding usage - Crank can be exchanged between single and double front chainring set ups - 168mm Q-Factor
The new Super Record 12x2 Speed crankset: an intense concentration of innovation that results in the greatest possible stiffness and precision in derailing, whilst providing a dedicated aerodynamic “super design." The new carbon fiber Super Record 12x2 Speed crankset has been made lighter on the inside through Campagnolo Hollow Technology, which uses the Ultra-Torque bracket system with a titanium axle to transfer all of the force the athlete applies to the pedal to the drivetrain. The new Super Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters, without affecting the Q factor, which remains constant at 145.5 millimeters thanks to the new hand crank design. The use of ceramic Cult bearings leads to obtaining the smooth ride that the Campagnolo brand is known for. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) combined with the eight fixing screws, optimize weight and stiffness through the increased use of carbon fiber. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.
To be in sync on a tandem is the essence of the experience. FSA's Gossamer tandem cranksets keep your timing perfect, and keeps the power going to the rear wheel where it belongs. The communication and balance? That's up to you and your partner. - Shimano and SRAM 10-Speed compatible
The Campagnolo Chorus 12-Speed Crankset features lightweight carbon crank arms, and is optimized for Campagnolo's Ultra-Torque crank system. - Utilizes Campagnolo's Ultra-Torque crank system to provide a very lightweight and stiff system that transfers power to the pedals without power loss - Directly molded unidirectional carbon fiber cranks, steel axle, and aluminum chainrings provide exceptional stiffness and optimum power transmission - Symmetrical teeth on the internal chainring allow for fluid and precise transmission, even with extreme cross-chaining - Chainrings are surface-treated for longer life - Q-Factor: 145.5mm - Design is optimized to run multiple chainring combinations - Number of Chainrings: Double - Chainline/Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay - Spindle Interface Type: Campagnolo Ultra-Torque - Chainring BCD: 96 - Pedal Spindle: 9/16" - Crank Intended Use: Road - Drivetrain Speeds: 12 - BB Included: No - Weight: 686
$448.00 - $485.50
Developed for maximum chain control, SRAM's XX1 X-SYNC Q-Factor Crankset is precisely CNC-machined to support the chain’s inner and outer links perfectly. Plus, the carbon arms and forged aluminum spider make for an incredibly light, stiff crank that delivers every drip of energy to the trail. - BB Included: No - Chainrings Included: Yes - Color: Black - Drivetrain Speeds: 11, 10 - Number of Chainrings: Single - Pedal Spindle: 9/16" - Rings: 32-tooth
A 10-speed, double crankset with melt-forged arms intended to be used with Octalink bottom brackets. - Alloy crank arms - Alloy outer ring, steel inner ring - 48.7mm chain line with a 113mm spindle - Number of Chainrings: Double - Chainline/Hub Compatibility: 135/142 MTB Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Rings: 36/22 - Spindle Interface Type: Shimano Octalink V2 - Drivetrain Speeds: 10 - Chainring BCD: 104, 64 - BB Included: No
The RIDE crank arm set offers CINCH versatility, adaptable chainring options, and the 24mm EXI interface system for easier installation and removal. This set is a budget-friendly option with signature RaceFace styling, performance and craftsmanship. - Offers CINCH system compatibility - 24mm EXI interface for easier crank installation - Forged from 6066 aluminum with aggressive styling for a high strength to weight ratio - Compatible with CINCH direct mount alloy or steel rings - Direct mount chainline: 78.5mm / 85mm (Flipped Ring) - 2X Cinch spider chainline: 77mm - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 190/197 Hubs - Crank Intended Use: Fat Bike - Pedal Spindle: 9/16" - Spindle Interface Type: RaceFace EXI - Chainring BCD: Direct Mount CINCH - BB Included: No
The XX1 Eagle DUB crankset has been re-examined and re-engineered. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility, and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Carbon-tuned lay-up crank design provides extreme stiffness and light weight - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Boost Compatible - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 141/148 Boost Hubs
$268.00 - $303.00
SRAM's Force 22 Crankset uses unidirectional carbon arms with a forged aluminum spider and integrated bottom-bracket axle to ensure top-notch stiffness for awesome power transfer and exceptionally low weights. Experience phenomenal front shifting with SRAM's X Glide R chainrings that start out as 5mm-thick aluminum plates and then precision machined to eliminate all unessential material while retaining extreme stiffness. With so much great technology and 11-speed compatibility, they're a force to be reckoned with.
$267.00 - $303.00
Forget front derailleurs; SRAM's Force 1 Crankset brings a game-changing upgrade in performance and reliability to cyclocross, road, and other 700c disciplines. Force 1 combines the durability, simplicity and efficiency that SRAM is known for with their 1x mountain technology. - Single-ring drivetrain simplifies functionality - SRAM X-Sync: wide-tooth, narrow-tooth chainring technology provides maximum chain control - Chainrings available in 42, 50 (110 BCD), and 52 (130BCD) teeth to conquer every course from sand dunes to gravel-road assaults - Unidirectional carbon crank arm matched to a forged aluminum spider for lightweight and durability - Weight 679g-24mm, 172.5mm, 50T, no BB - Bottom bracket not included
SRAM pioneered the 1x drivetrain, and the SRAM Force 1 crankset evolves the innovation. It’s lighter, stronger, and simpler—non-aero chainrings can now be installed with a single tool. For cross, TT, tri and crits, this is the king of 1x. - Single-ring drivetrain simplifies functionality and reduces weight - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Can be upgraded to a power meter
Strength is how the X01 Eagle DUB crankset takes capability to places never before reached. It’s the strongest crank in the entire Eagle ecosystem, and it holds this status at a weight that is hard to fathom. It features industry-proven and rider-beloved DUB technology to radically simplify the relationship of spindle to bottom bracket, delivering unprecedented simplicity, compatibility, and durability. - The strongest crank in the entire Eagle ecosystem. - Master X01 colorway as part of Eagle Colorsystem—goes with all cassette and chain color options.
True competitors are always looking for a performance advantage - a relentless pursuit of equipment that is lighter, stiffer, stronger, and more durable. To create the best drivetrain possible, we re-examined and re-engineered our crankset design. Our all-new XX1 Eagle CARBON TUNED crankset is our lightest, stiffest, and strongest to date. DUB technology enhances this by simplifying the relationship of the spindle to the bottom bracket and redefining the measure of durability. DUB-powered cranksets mean simplicity, compatibility, and durability. - Chainrings not included
The latest FSA crankset for gravel, adventure, or road use. Thanks to the adaptable BB386 EVO 30mm spindle, this modular system will fit a wide variety of frames with a range of BB standards. - Hollow forged arms - Forged AL7050 BB386EVO spindle - Direct mount outer chainring and 90 BCD inner chainrings - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems - Number of Chainrings: Double - Chainline/Hub Compatibility: 130 Hubs - Spindle Interface Type: 386 EVO - Chainring BCD: 90, Direct Mount FSA - Pedal Spindle: 9/16" - Crank Intended Use: Road, Gravel - Crank Length: 170mm - Rings: 46/30 - Drivetrain Speeds: 11 - BB Included: No - Weight: 755
The FSA Gradient crankset is designed for enduro riding, for riders that like to crank up the trail and tear it apart on the way back down. Gradient raises the standard on strength, while keeping components lightweight. - The convertible spider design allows for different chainring and chainline configurations - Direct mount steel chainring features a thick-thin tooth design for maximum chain engagement - Crank arms are solid forged from AL7050 aluminum - Optimized for 11-speed systems - For Boost spacing - Number of Chainrings: Single - Chainline/Hub Compatibility: 150/157 Hubs, 157 Super Boost Hubs - Crank Length: 170mm - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Rings: 32 - Spindle Interface Type: 392 EVO - Drivetrain Speeds: 11 - Chainring BCD: Direct Mount FSA - BB Included: No
The Shimano Deore XT FC-M8130 Super Boost+ crankset for MTB offers the simplicity of a 1x drivetrain with the stability and compatibility of Hollowtech II technology. - Chainring sold separately - Hollow forged crank maximizes power transfer while limiting weight - Shimano's Hollowtech II technology provides the best balance of stiffness, strength, weight and rotating performance - Features 56.5mm chainline designed for Super Boost+ spacing - 181mm Q-factor - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 157 Super Boost Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: Shimano Hollowtech II - Drivetrain Speeds: 12 - Chainring BCD: Direct Mount - BB Included: No
The SRAM Force AXS Crank Arm Assembly features carbon crank arms that are ready to pair with any SRAM AXS spider or integrated chainring, with or without power. - 8-bolt interface is compatible with power and non-power AXS spiders and integrated chainrings - Not compatible with SRAM's 3-bolt direct mount interface - Carbon fiber arms with natural carbon finish - Spider and chainrings sold separately - DUB spindle interface - Compatible with all SRAM Road DUB bottom brackets - Number of Chainrings: No Rings, No Spider Included - Crank Intended Use: Road - Pedal Spindle: 9/16" - Spindle Interface Type: SRAM DUB - Chainring BCD: Direct Mount SRAM - BB Included: No
The XX1 Eagle DUB crankset has been re-examined and re-engineered. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility, and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Carbon-tuned lay-up crank design provides extreme stiffness and light weight - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - BB Included: No - Chainring BCD: Sram Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 135/142 MTB Hubs
Triathlon. Time Trial. Cyclocross. Some disciplines are made for 1x. And while SRAM's X-Range 2x set up has integrated much of the simplicity of a 1x system, there are still times when a single ring is best. The SRAM RED 1 crankset offers the most demanding racers the right mix of features—aerodynamics, durability, and simplicity. - Single-ring drivetrain simplifies functionality and reduces weight - 48 and 50t variants feature direct mount aero chainrings for better aerodynamics - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - DUB bottom bracket adds durability and simplicity - Can be upgraded to a power meter - Version: D1
The Race Face Turbine crank is designed as the performance-oriented alloy crank for XC, trail, and enduro applications. As the lightest alloy option in the CINCH lineup, the Turbine allows for interchangeable spiders, limitless ring combinations, a 30mm alloy spindle, and compatibility across all relevant frame standards. - Deep pocket forged and CNC machined aluminum crank arms - Bottom bracket sold separately
The SRAM RED AXS power meter breaks with tradition — and breaks through to new levels of performance. SRAM reengineered road gearing: reducing front chainring size and adding more range to the rear cassette. They also maintained a 13-tooth delta on all chainring pairs, ensuring precise shifting for any setup. This results in more useful gearing and better shifting across all configurations. These power meters are also designed with Quarq's premier DZero power measurement technology fully integrated into the crankset. Welcome to the pinnacle of the power meter. - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Integrated power measurement - Power meter is fully integrated into the chainring set for lighter weight - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Improved front shifting performance for crisp and accurate front shifts - Unique chainring shape results in a lighter weight, stiffer, more durable crankset - Integrated chainring design significantly reduces weight - DUB bottom bracket adds durability, simplicity and broad compatibility - Speeds: 12 - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE - Bottom bracket not included
Pedal-heavy outings with rowdy all-mountain shredding can be very demanding on cranks. The Next R CINCH Crankset is light and strong where it matters most. Racing time or just rallying with friends, feel free to get a bit more sideways with Next R. - Manufactured from UD Carbon with matte clearcoat - Cinch technology for game-changing compatibility - Includes 30mm spindle, for 68/73mm BB shells
Promax HF-2 BMX Cranksets are Promax’s top-of-the-line crank offering. Hollow-forged from 6061-T6 aluminum, both crank arms are hollow so they are super-stiff, yet lightweight. The crank arms spin on a beefy 24-millimeter spindle permanently fitted into the drive-side arm. - Bottom bracket sold separately - Pedal washers included - Meets or exceeds ENBMX standards - Chainline: 43mm - Q-Factor: 167mm - BCD: 104mm - Weight: 29.5 oz.
Page 1 of 3 Next page