Front

Sleek, balanced and consistent. Shimano's Tiagra 4700 series front derailleur provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. - Model Number: FD-4700 - Series: Tiagra - Cassette Compatibility: 10-speed - Top Gear Teeth: 53T - Maximum Capacity: 16T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Band Mount: 28.6 / 31.8 (w/AdapterS) 34.9

Shimano's Tiagra Front Derailleur provides quick shifting. The clear-coated aluminum body and plated-steel cage are extra durable so you can enjoy smooth shifts mile after mile.

The Shimano Deore XT FD-M8100 front derailleur offers powerful and stable front shifting for 2 x 12 systems. - Increased traction range and no chain rub for long travel bikes - Extra wide range with front double 36-26T - Compatible with 2.3-inch tire on wider rims - Drivetrain Speeds: 12 - Front Der/Shifter Compatibility: Shimano Mountain - Front Derailleur Cable Pull: Front Pull - Front Derailleur Clamp: 34.9 (1-3/8") , 31.8 (1-1/4") , 28.6 (1-1/8") - Front Derailleur Style: Side Swing - Max Ring (teeth): 38

Shimano's Deore 10-speed Front Derailleur sports a lightweight cage that's chrome plated to reduce wear, and the body boasts wide parallel pivots that provide fast, smooth, and reliable shifts every time. Dual-pull design simplifies setup by working with top or bottom routed shift cables.

Shimano's Tiagra Front Derailleur (3x10-speed) is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with cascaded technology from the top shelf Dura Ace line. - Model Number: FD-4703 - Series: Tiagra - Cassette Compatibility: 10 - Top Gear Teeth: 50T - Maximum Capacity: 20T - Chain Stay Angle: 63-66 - Chain Line: 45 - Band Mount: 28.6mm / 31.8mm (w/AdapterS) 34.9mm

Shimano's CX70 Front Derailleur was designed from the ground up for the uiquely punishing world of cyclocross. Mud-shedding plates fight back against ice and debris build up. Reinforced pins stiffen the plates for fast shifts under the worst conditions, while special attention has been paid to the derailleur pivots and arms so they shed mud and ice. The cage size is optimized for the close-ratio chainrings common on cyclocross bikes. The CX70 Front Derailleur is available as either a top or bottom pull model to suit your bike.

Shimano's Deore XT Front Derailleur sports a lightweight aluminum cage that's chrome plated to reduce wear, and uses wide parallel pivots to provide fast, smooth, and reliable front shifting. This derailleur uses direct mounting and is specifically optimized for 2x10 set ups.

Shimano's 105 Clamp-On Front Derailleur sports a cold forged-aluminum body with Shimano's extra wide-pivot design for lightning-quick and super-smooth shifts. The steel cage ensures excellent durability.

The Shimano GRX RX-810-F front derailleur offers lighter front shifting operation and easier setup thanks to the new link construction and integrated cable tensioner. It features a 2.5mm outboard chain line design to allow wider tire clearance for mixed-terrain riding. The RX-810-F also accommodates a 17T front chainring range for wider gearing options. - Ergonomic power curve - Integrated cable tension adjustment - Natural stroke feeling - Chainline +2.5 mm vs. conventional road FD - 17T front range - More cable routing options - Lighter front shifting - Wider tire clearance - Wider range front gearing - Precise and easy front derailleur adjustment

Shimano Ultegra R8000 front derailleur. - Lighter front shifting operation - Link construction matches the force curve of the hand more naturally to reduce effort at the end of shifting - 100% perfect setting - New link construction allows for more flexible cable routing design - TL-FD68 and turning converter is not required in assembly - Easy and precise setting - Now possible to adjust cable tension on FD without specialized tools - Redesigned to fit wider gear pitch without sacrificing shifting performance - Shorter length of rear center (410mm) with O.L.D. 135mm - Model Number: FD-R8000-B - Series: Ultegra - Top Gear Teeth: 46-53T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Average Weight: 106 grams

The Dura-Ace 11-Speed Front Derailleur is Shimano's top-of-the-line front changer. The body is made of cold-forged aluminum for weight savings and high strength, and the pivots are spaced extra wide for amazing shifting. Through a redesigned pull arm and change in actuation ratio, Shimano has reduced the shifting effort by 43% while also reducing the throw of the shift lever for the fastest, easiest, smoothest front shifting yet. Plus, the lightweight aluminum cage is nickel plated for superior durability.

The Shimano GRX RX815 Di2 front derailleur delivers quick and smooth front shifting even under high pedaling torque. It's designed for a wider, 17T front chainring range, has programmed chain guide trim settings, and can be used in full or semi Shimano Synchronized Shift modes. - Chainline +2.5 mm vs. conventional road FD - Wide, 17T front range chainring range - Wider tire clearance

Shimano XT FD-M8070 Di2 Front Derailleurs - Accurate and stable shifting in any condition - Instant response - Customized shift speed within Multi-shift - Powerful shifting - Increased power vs. mechanical - Smart and efficient gear selection with Shimano Synchro Shift - Single lever operation - Rider-programmable shift mapping - Series : Shimano Deore XT - Swing Action: Down Swing - Top Gear Teeth: 38-34T - Chain Line: 48.8 - Chain Stay Angle: 66-69 - Average Weight: 134 grams

Shimano Ultegra R8050 Di2 front derailleur. - Quick and smooth front shifting under high pedaling torque - Programmed control of chain guide - Shimano Synchronized shift - Full and semi synchronized shifting program - Redesigned to fit wider gear pitch without sacrificing shifting - Shorter length of rear center (410mm) with O.L.D. 135mm - System communication with rear derailleur, Programmed control of chainguide works for minimal chance of chain drop - Top Gear Teeth: 46-53T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Average Weight: 132 grams

Combining Shimano's Di2 platform and the road incarnation of Hyperglide+, the Ultegra FD-R8150 front derailleur shifts between chainrings with the fast and seamless action. - Small, sleek and lightweight front derailleur - Frontal area is smaller than previous designs to reduce aerodynamic drag - Top gear teeth capacity: 50-54t - 61-66 degree chainstay angle - Includes 1 SD300 port

Grab ahold of Shimano's Dura-Ace Di2 Front Derailleur and say hello to near-telepathic shifting. This futuristic front derailleur monitors the position of both derailleurs and trims automatically, ensuring that you have proper derailleur position and no chain rub, no matter what chainring and cog combination you may find yourself in. This is also the fastest and most accurately shifting front derailleur Shimano has ever made, getting you into the big ring more reliably and with greater speed. The derailleur uses Shimano's E-Tube wiring system for waterproof connections and simple, clean setup, and the lack of cables and housing increases service life and reliability.

- Ergonomic Shifting Operation Without Stress - Shimano Synchronized Shift - Race Endurance For Less Damage In Crush - Quick And Smooth Front Shifting "Under" High Pedaling Torque - Maintains Compact And Smooth Appearance - Top Gear Teeth: 46-55T - Chain Stay Angle: 61-66° - Chain Line: 43.5mm

Despite its smaller, lighter design, the Shimano Dura-Ace FD-R9250 offers ultra-fast front shifting. - Fast Di2 shifting performance - Smaller, sleeker, lighter - Frontal area is smaller than previous designs to reduce aerodynamic drag - Top gear teeth capacity: 50-55t - 61-66 degree chainstay angle - Includes 1 SD300 port

- Prevents chain derailment when shifting to inner ring - Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes