Lighting

Taillight Seat Stay Mount

- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack

- Mounts most AA flashlights to handlebars and helmets - Ideal low-cost lighting alternative for cyclists

- Fits 25.4-31.8mm handlebars - Compatible with Blaze, Beamers, 1200, 5000x and Super Spot

Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts

Mounts a Specialized Stix light to a CPSC, DIN standard reflector/rack bracket or the Specialized Pizza Rack. - Vertical CPSC hole pattern. - This mount can attach to the Horizontal Din hole pattern. - Specialized single hole pattern for the Pizza Rack. - Mounts Stix light horizontally. - Includes all mounting hardware.

USB cable for USB rechargeable batteries. System Compatibility: - Lumina Series - Lightning Bug 120 USB - Sentinel 2W USB - Solas 2W USB - Stinger USB

The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seatposts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it’s time for a recharge.

-Mounts easily to front racks with threaded M5 mounts -Allows for unobstructed light positioning -22.2mm clamping diameter

Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.

- Be safe and be seen with hi-viz red LED safety lights - 360-degree visibility with rapid blink, slow blink, and full glow LED modes - Sweat-proof, water resistant design moves with you - Lightweight material for ultimate comfort - Dimensions: 2.68cm x 3.03cm x 1.02cm

Lezyne's versatile Composite Matrix Helmet Mount is a durable and versatile accessory for Lezyne Mini XL, Power XL, Super XL, Deca and Mega Drives. It is constructed with lightweight and durable mold-injected Composite Matrix material for its base plate and spherical pivot. A strong rubber and Velcro strap attaches the mount to the helmet. The Composite Matrix spherical pivot and cradle allow the user to adjust the position of the light in all directions.

The versatile Composite Matrix Helmet Mount is a durable and versatile accessory for Lezyne KTV Pro, Power XL, Macro XL, Hecto XL and Micro XL Drives. It is constructed with lightweight and durable mold-injected Composite Matrix material for its base plate and spherical pivot. A strong rubber and Velcro strap attaches the mount to the helmet. The Composite Matrix spherical pivot and cradle allow the user to adjust the position of the light in all directions.

Set up a light wherever you can connect a GoPro mount. Use this adapter to connect your Imjin or Nip to any GoPro mounting option.

Setup a light wherever you can connect a GoPro mount. Use this adapter to connect your Taz to any GoPro mounting option.

Setup your Light & Motion Urban or Deckhand light (sold separately) wherever you can connect a GoPro mount. Use this adapter to connect your Urban or Deckhand to any GoPro mounting option.

Light & Motion's Vis 180 Aero Post Pad lets you easily attach your Vis 180 taillight to the back of your aero seatpost so you can be fast and visible.

Strap Light & Motion's Vis 360 Spare Front Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.

Strap Light & Motion's Vis 360 Spare Rear Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.

Simple operation with three super-bright LEDs make the RedBat your go-to taillight for being seen. Solid and flashing visibility options for day and night riding. - 3 LEDs under a red lens (1 lumen) - 4 functions: steady, flashing, chasing, random - 19–40mm diameter bracket - Also works clipped to a bag/waistband - 2 AAA batteries included - Runtimes/Modes: 70 hours in Solid mode, and 160-250 hours in Flashing mode

The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for their flagship tail light, the Sentinel. It allows you to fine tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It’s an easy-on and easy-off non-slip tail light mount that also features a grooved contact pad that makes this the ‘go-to’ mount for riders using aero seatposts. - Fits standard and aero seatposts System Compatibility: - Sentinel - Solas - Sabre - CherryBomb

All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)

The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series

The TL 5.0 SL has five ultra bright LED’s with four different operating modes, including three different flash modes. New for 2015, the amber Side Lights help to provide even more visibility from the sides of the rider. The TL 5.0 SL will help keep you safe and seen from behind (180 degree visibility). The TL 5.0 SL operates on 2 AAA batteries (included) for up to 100 hours on flash. - 5 Ultra Bright LEDs - A wearable safety light – clip onto various straps, belt loops, etc. - 100 hours run time - Budget-friendly quality light - Eye catching flash mode patterns - 4 operating modes - Runs on AAA batteries - FL 1 Standard IP64, water resistant WARRANTY The TL 5.0 SL is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light - Seatpost Mount - 2 AAA Batteries

The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory.

Make sure you have excellent rear visibility at night with the Blinky 3. This sweet taillight aims 3 bright LEDs directionally to provide visibility from up to a mile away. Its soft-touch power switch accesses flashing or steady modes for up to 100 hours of run time on the 2 AAA batteries (included). And, it includes seatpost and seatstay mounts.

Sigma Rear Brake light. A simple little light with a big purpose — safety. Just clip this light on your rear brake cable and it will help alert anyone behind you that you are slowing down. Perfect for kids, commuters, and group rides! Fits U-brakes, V-brakes, canti's, road calipers, mechanical disc brakes, but won't fit hydraulics. Functions: - LED brake light with replaceable CR 1025 button cell battery (included) - Clearly visible, red brake LED during use - Burn time: approx. 200 hours continuous light, average of approx. 100,000 braking processes - Attaches to the rear brake cable using a 2.5 mm hex wrench (not included) - Quick and simple attachment - Attaches to cable actuated mechanical brakes (25 mm clearance) - Rounded brass screw to protect the brake cable - Five different colors are available to match any bike. - Robust, water-resistant housing - Weight: 7 g

High-efficiency charger cable for Flux headlights. - High capacity wire can transfer more power with less loss. - Custom "L" shaped Mini USB Male for the best fit to Flux headlights. - NOTE: This is a CHARGE ONLY cable and cannot be used for data transfer.

Super bright and compact, Cateye's Omni 3 Front Safety Light uses CatEye's Omni Directional Technology for increased visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and extend the run time. Plus, CatEye's tool-free FlexTight mount makes installation easy.

Replacement LED assembly for the Centro LED helmet.