Packs/Racks/Baskets

Giant's Rack-It Beam Seatpost Rack is light and durable so you can haul your gear without being weighed down. It boasts a center platform that supports loads up to 22 lbs and acts as a partial fender. The quick release attachment makes it easy to remove when not needed and a sliding cargo tray allows you to carry bulkier items. There's also a mount for a reflector or taillight (sold separately).

- One size fit all frames sizes - Easier, user-friendly assembly - 13MM alloy frame - Maximum load rating of 15kg - Pannier bag compatible

Named after the Italian word for Brick, Mattone is a water-resistant, ultra-compact seat bag that attaches to the rails using the BOA Closure System.  Unique zipper design allows it to be accessed while on the bike, or to open like a book when removed from the bike for easy access. Mattone is for the cyclist looking to carry a spare tube, CO2, multi-tool, and some cash in a discreet, water-resistant package. Internal divider holds ID, credit card, or cash while also protecting your tube from your multi-tool! Seat bag users fall into two categories: Seat Roll aficionados and seat bag users. Traditionally, seat bags have been simple open spaces that allowed content to jangle about, making noise and rubbing against each other. Often times a spare tube was pulled out of a seat bag to reveal it was more full of holes than the tube being replaced due to friction against a house key or multi-tool. With Mattone, we designed a layout similar to a book, where the bag can fully open to hold the tube and CO2 cartridge on one side, separated by a padded ballistic nylon 'page' separating it from the other side where you can store an inflator head, multi-tool, contact lens case, etc. The 'page' also contains a slot for a credit card, ID, money, or house key. The unique off-center Aquaguard Zipper allows the case to completely open and lay flat when off the bike, while also allowing easy access to the multi-tool and money/card slots when on the bike without risk of spilling all the contents of the bag. A high-friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the Mattone will remain 'high and tight' under your saddle until you need to access it...no swinging, swaying, or rattling...ever. - Exterior—Sleek black finish with reflective graphics - Interior—Hi-contrast red material with separate ID, credit card, or money flap - Interior Volume—Holds one inner tube, one CO2 cartridge, one tire lever (all of these components are sold separately and are not included) - BOA Closure System with open guide release on Hypalon retaining strap - YKK Aquaguard zipper - Outside Dimensions: 13cm x 8.5cm x 5.5cm - Volume: Approximately .61 L - Strap Measurements: 27cm x 4.5cm

Seat Capsule Premio is our BOA-powered saddlebag option for those that prefer more structure and internal volume than what a seat roll has to offer. A high-strength thermoformed shell creates a modular structure with two internal dividers that help keep everything organized. The capsule is secured to the bike using the BOA Closure System, and features a Rail Guard for superior grip and protection of the saddle rails. The zipper is a YKK locking model that bisects the lower third of the bag. Our designer chose this low position to make it easier to access the bag while it's still attached to the saddle; a key difference between a seat bag and a seat roll. - High strength Thermoformed shell - Boa Closure System with Guide - Rail Guard protects and grips saddle rails - YKK Locking Zipper - NO Velcro to damage your seat post or inner short legs - 625cc Internal Volume

Seat Roll Asymmetrico takes everything we've learned in 5 years of producing the award-winning Seat Roll Premio and kicks it up a notch with lighter materials, reduced bulk, improved abrasion resistance, an extra pocket, and a unique asymmetric design which allows you to pack more into a smaller volume, oh, and room for up to 700x45 (29x1.75") tubes! - 2-Ply Ballistic Nylon Construction with Hypalon outer jacket - Boa L6 Closure System with Lace Guide - Padded Rail Guard protects saddle rails and speeds Installation - FOUR internal pockets: Holds tubes up to 700x45mm - Black reflective printing provide stealthy HI-VIS in low-light conditions - Weight: 85 grams

All Globe racks are made with T-channel aluminum rails to maximize versatility, capability, and creativity. Many of our Globe-branded accessories mount directly to these channels, but they will also accept just about anything you can imagine bolting to them. To help unlock that possibility, the Rack Customization Kit provides an assortment of bolts and T-nuts compatible with our front and rear rack rails. Just BYO milk carton, wine crate, cooler, you name it! Two T-channel rail pieces can be used to increase the effective dimensions of your rack to provide a more secure platform for large or awkward gear. - Compatible with Globe Haul ST and Haul LT rear racks, and Globe Front Rack. - Includes two rack extension rails, eight T-nuts, and 12 assorted bolts. - All tools required for assembly are included with the purchase of the Haul ST or Haul LT bike.

The Roll Rack fits all Specialized Roll models, as well as most bikes with a 650b wheel size. The rack also features a maximum load capacity of 15kg, and it includes a steel bracket, hook plate, and corrosion-resistant hardware. - Fits all Specialized Roll models, as well as most bikes with a 650b wheel size. - Includes a steel bracket, hook plate, and corrosion-resistant hardware. - Maximum load capacity: 15kg

This versatile basket is the most adaptable front basket Wald offers. - Made in U.S.A. (Maysville, KY) - Deep basket that is sized for a grocery sack - Dimensions: 14.5 x 9.5 x 9 inches; basket tapers to 12.25 x 7 inches - Extended handlebar clamps fit 7/8" and 1" diameter handlebars - Two-piece adjustable legs extend from approx. 14 inches to 22 inches and mount to either the front axle or fork eyelets for bikes with quick release front hubs - Available in gloss black (198GB) or white (198WH) Powder Coat Finish - Complete basket weighs 3 lbs.

The Rear Top Tube Bag is the perfect add-on to maximize storage on your bike when frame space is limited, all other attachment points have been used or you want to organize tools, spares, food, or other accessories into a separate compartment. A simple zip closure allows for easy one-handed access. Hypalon MOLLE accents on the base and rear of the bag each provide two placements for the double-sided velcro straps, allowing you to tailor the bag to be ideal for your setup. Handmade in our Yorkshire workshop from 100% waterproof textured nylon, with a nylon lining and finished with the classic vegan-friendly PU leather Restrap label. Weight - 65g Capacity - 1L - 100% handmade in Yorkshire, England - Capacity: 61 cu in (1L) - Weight: 70g All Restrap products carry a lifetime guarantee to be free of defects in materials and workmanship. We stand by our products and will cover the cost to repair or replace any defective product.

This front basket system uses a bolt-on handlebar mount to allow for quick and easy removal of the basket itself. - Extended handlebar clamps allow greater clearance for shift and brake cables - Requires 3.5" of handlebar clearance for mount - Fits 7/8" to 31.8mm handlebars - Made in USA - Dimensions: 11.75 x 8 x 9"

Giant knows that life comes with accessories, and their City Pannier Set is a great way to carry your on-the-go essentials from A to B. Simple, open-top construction with water resistant fabric and a full-coverage lid flap make these bags easy and fast to use. And, since they're built saddlebag-style as a pair, all you have to do is release the tool-free attachments, grab the central handle, and go!

Topeak's Fuel Tank mounts directly to your top tube, giving you quick and easy access to energy bars, your phone, wallet, tools or any small essential gear you need to keep close at hand while riding. The top opening, zipper accessed, main compartment keeps contents safe and secure.

Need more carrying capacity for running errands? Then check out Topeak's Rear Basket. It easily attaches to a Topeak QuickTrack rear rack (sold separately) and holds groceries, work clothes and anything else you need to transport. And, its handle makes it extremely portable.

Foul weather is about to lose its sway over your two-wheeled adventures. Banjo Brothers' Waterproof Pannier is tailor-made for wet commutes and trips around town. The rugged nylon exterior fends off wear and tear while the welded-seam liner and roll-top closure keep the contents dry. It attaches easily to most rear racks (sold separately) via a quick-release mount so you can pop it off and bring it with you. And if you're riding in the rain, the reflective accents bring a little extra visibility and peace of mind.

Carry the essential roadside/trailside tools with the MSW Tool Hugger Kit. The Kit includes all the basics for quick repairs: CO2 cartridges, inflator head, tire levers, mini tool, and patch kit. Bring along your own tube and roll them all up in the Tool Hugger Wrap, which attaches to standard saddle rails, or just toss it into a jersey pocket. - Durable Cordura outer layer - Seven elastic tool compartments - Hook and loop closures

This versatile basket is based on Wald's popular 133 basket but uses a holder that bolts onto your handlebar. The holder offers greater clearance between the bar and basket for shifters, cables, and brake levers. Available in white (3133WH) or gloss black (3133GB) powder coat finishes. - Made in U.S.A. (Maysville, KY) - A Quick Release Basket with Bolt-on Holder for stable installation and use - Lift the handle to remove the basket and take it with you - Basket locks back in place when returned to the holder - Dimensions: 14.5 x 9.5 x 9 inches; the basket tapers to 12.25 x 7 inches at the bottom - Holder designed to fit 7/8", 1" and 31.8mm diameter handlebar - Handlebar clamps are 2" apart and offer clearance for shift and brake cables - Powder Coat Finish - Complete basket including the holder weighs 3 lbs.

Bring along the essentials with the Hot Laps 2L Bike Lumbar Pack. Your mini-tool, a tube, and some food pack into the organized main compartment, which includes a dedicated fleece-lined phone pocket and some organizers. If you're headed out under cloudy skies, there's just enough room for a packable jacket too. And lastly, the sleek deployable side water bottle pocket helps you stay hydrated. We bet you'll agree that there's nothing like the freedom of the sleek and functional Hot Laps 2L Lumbar Pack. - Breathable air mesh back panel - Two deployable side water bottle pockets - Internal organization - Padded, fleece-lined, zippered phone pocket - External attachment straps

- Includes everything for a quick fix while on or off-road - Giant seat bag - 12 glueless patches - 2 tire levers - Mini pump - 9 function multi-tool

If you use an ORTLIEB Back-Roller, Bike-Packer, or Velo-Shopper for your ride to work, you may want to consider the advantages of the Commuter Insert. You pack the Commuter Insert at home – with your laptop, lunchbox, documents, water bottle, pens, smartphone, change of shoes, etc. – and then simply insert it into your pannier. The advantage is that everything stays well-organized, nothing goes mysteriously missing and nothing hides in the depths of your bag. And so you save time and avoid those nervous moments of uncertainty. While the Commuter Insert is ideal for commuters, it can also be a faithful companion to anyone who transports gear from any point A to any point B. The Commuter Insert is made of lightweight, durable nylon fabric. A padded compartment for your laptop or tablet is located directly under the handle. There is a separate pen compartment and two compartments for your smartphone and money, including an integrated key chain. The large inside compartment offers plenty of space for provisions and a change of clothes. FEATURES: - Stable and tip-resistant even when empty - Two side mounts for water bottles, etc. - Flat mesh pocket (ideal for a bike lock) - Foam padding on the sides and bottom - Ideal for use with all ORTLIEB Back-Rollers, Bike-Packers and Velo-Shoppers - Permits access to the inside pocket of your bike pannier

The name of the game is finding instead of searching. The Packing Cubes save you a lot of time and frustration when it comes to packing for your bike tour. The Cubes offer an ideally organized space for your clothing, tools, toiletries, and other gear. The system was specially designed for those mission-critical little things that often slip down into the depths of your panniers or otherwise defy your earnest search efforts. The inserts also help you to keep clean and soiled things separate. The three inserts (two 6-liter units and one 5-liter unit) can be perfectly stacked in ORTLIEB Back-Rollers, Velo-Shoppers, and Bike-Packers. The durable, lightweight nylon material was specially developed to ensure a long service life. All of the Cubes are outfitted with a practical 2-way zipper to ensure easy access to their contents. Outfitted with top handles, the inserts are easy to remove from your panniers. Each Cube has additional inside and outside mesh pockets for stowing those very small objects you would like to have within reach. Given their modular design, the bags can also be used individually when you're out on short trips. FEATURES: - Each unit in the modular system can also be used individually - Volume of organizers: top and middle bag: each 6 L, lower bag: 5 L - Suitable as an insert for all ORTLIEB Back-Rollers, Bike-Packers and Velo-Shoppers

This seat pack with its convenient adapter system offers you an elegant means of stowing an additional amount of critical gear. The Saddle-Bag Two is a redesigned ORTLIEB classic, a seat pack that is so practical that it belongs on every bike tour! The 1.6-liter version (ideal for road bikes and mountain bikes) of the waterproof Saddle-Bag Two provides a secure place for a bike-repair kit, a smartphone, or other items. The 4.1-liter version offers almost as much storage space as a small backpack, making it an ideal supplementary pack when you have a lot to carry. Thanks to the pack's roll closure and side buckles, everything you stow remains snugly packed and easy to access. The Saddle-Bag Two attaches directly to your bike seat with an adjustable snap buckle. The intuitive adapter allows you to quickly attach the pack to or detach it from your bike. Moreover, the snap buckle is compatible with all previous Saddle-Bag Two models so that you could use it on different bikes. A Velcro strap that attaches to your seat stem provides additional stability, effectively preventing any unwanted shifting. Another advantage in the case of the large pack is that it doubles as a rear fender, keeping spray water off your back. Further Features: - PVC-free, polyurethane-coated nylon fabric - Ideal for use with mountain bikes, road bikes, and touring bikes - No protruding plastic parts on the inside - Adjustable attachment below your bike seat - Velcro strap compatible with seat-stem diameters of up to 34.9mm (e.g. the Birdy folding bicycle) - Scotchlite 3M reflector for added protection at night - Daisy chain for the optional attachment of a rear light

Similar to the original MATTONE, a high friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the MATTONE will remain 'high and tight' under your saddle until you need to access it... no swinging, swaying, or rattling... ever

- Includes everything for a quick fix while on or off-road - Liv seat bag - 12 glueless patches - 2 tire levers - Mini pump - 9 function multi-tool

- Includes everything for a quick fix while on or off-road - Giant seat bag - 12 glueless patches - 2 tire levers - Mini pump - 9 function multi-tool

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061 T6 alloy construction - To be mounted on bikes with disc brakes - 625g - 55lb weight capacity

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - Spring clip for additional cargo security - 800g - 55lb weight capacity

The 1 Litre City Stem Bag fits any folding bicycle. Made from tough waterproof fabrics, it provides a simple solution for carrying a water bottle, snacks, or other accessories. The bag moves with the stem and does not impact the folding mechanism of the bike. Handmade in our Yorkshire workshop, all bags are finished with the classic Restrap label, and made from vegan-friendly PU. Weight - 96g Capacity - 1L - Bags designed specifically for use on folding bicycles - 100% handmade in Yorkshire England from vegan-friendly PU - Third-party online sales are strictly prohibited by the manufacturer All Restrap products carry a lifetime guarantee to be free of defects in materials and workmanship. We stand by our products and will cover the cost to repair or replace any defective product.

Topeak's MTX BeamRack is an awesome way to add touring capacity to bikes that won't accept conventional racks, such as dual-suspension mountain bikes. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 20-pounds with ease.

A lighter duty version for MTB and commuter use. QR mechanism is secure and easy to use. 7 kg (15 lb) carrying capacity. Compatible with all MTX TrunkBags. Includes hidden storage tray, rubber bungee and safety reflector. - Clamp: Fits 25.4/31.8 mm (shims Incl.) - Bag Compatibility: MTX TurnkBags - Material: Aluminum beam / Plastic cargo deck - Max Weight Capacity: 7 Kilograms - Size: 51 x 12.5 x 9 cm / 20.1” x 4.9” x 3.5” - Weight: 688 grams

Specifically designed for up to an 8.5” tablet to provide ultimate protection against water and dirt. QuickClick handlebar mount (Fixer 9) is angle adjustable and holds the tablet close at hand.